Leaderboard

Just a quick update on what's going on with the detachment stuff since it's been a quiet period (not always a bad thing!). 1. We're actively designing merch for a racing shirt, patch, and coin themed for KOTOR 20th based on votes. These will come in the next few months. It is slow due to lack of artists available and, well, life. 2. We're working on 3 New to the Legion CRLs/costumes currently that we're hoping to be released before the end of the term in Feb after updates to the costumes are finished. 3. We were told by LMOs that we had to wait until the end of the season of Ahsoka before submitting requests for assignment of the costumes. But, after the short, "please don't spoil the episode for us" request time, we're submitting for Shin, Baylan, Morgan, Marrok, and all 3 Great Mothers to be assigned to TFE. 4. We're still looking for artists and a new Programs Officer if you're interested/able to assist the Detachment! If you have any other requests or ideas, please feel free to comment or message me!

It's finally here! Galactic Armory's V2 mask. Much more detailed and accurate than the old version. I figure I can fit red LEDs into the eye sockets to emulate the eyes.

Just as a head's up to anyone interested in doing this costume: It has been agreed that so long as the visible parts of this costume match the references available, I am good with allowing the missing parts to be supplemented from Eleena Daaru's references. With that, I look forward to seeing a high quality submission soon!

New guy here! I've been working on a spinning GI saber for a bit and it's starting to come along. I have a youtube channel documenting the build but I also wanted a build log for better documentation and thought 'what better place then with people who can give me some sound guidance.' So here I am! Looking forward to chatting with you grand folks. I'm pretty far along in the project, so I'll be updating this log until it catches up with progress.

Try everything on Boots & gloves are from Crowprops And now I'm searching for armors

Hi folks, I just wanted to share some of the pics I took during my shooting at the Georges Henri park in Brussels

Hello from Japan. I'm working on Darth Margas. Thank you for your opinion. Sent from my iPhone using Tapatalk

Korbanth has a Savage hilt for sale: https://korbanth.com/empty-double-sided-staff-the-oppressor

So close to being done. I need to redo the arm guards and chest armor and shorten the bottom corset pieces.

Hello everyone, I’m Daisy from the Dutch Garrison and together with Rikki I have been assigned as your LMO team for this term. About Me: My name is Daisy van Rijn, and this is my second term as a 501st Legion Membership Officer. I have eight approved 501st costumes, four in the Rebel Legion and I have a Seventh Sister costume that I'm hoping to finish this year. I have been sewing since I was 19 and love sharing that acquired knowledge with others. I'm excited to be able to assist you this year with the TFE Detachment as I have a large love for the Old Republic Era. What is an LMO? The Legion Membership Team is responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officers drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with member’s costumes. Have a question about membership these are the folks to talk to! There are LMOs you can contact at any time at Legion Officers however Rikki and I are the ones who are assigned to the Imperial Gunnery Corps this term. Thinking of starting a NTTL (New to the Legion) Costume? Please message the Detachment and me here as well as send a link to your build thread. I love researching new costumes and helping. Worried a costume may or may not be eligible for the Legion approval? https://databank.501st.com/databank/Costuming:CRLGuide See Character Approval and New to the Legion Costumes (NTTL) sections for details. For “New to the Legion” costumes please also have a look here: Costuming Standards Have a question? Do not hesitate to message me. Get your references together and sent to LMO (at) 501st (dot) com.

Today was play with makeup... I didn't get around to doing the back of the head tattoos. I do plan on making a stencil for that part. This took around 2 1/2hrs. Still learning the best way to work with the materials. I think I did a pretty good job.

I found this on StarWars.com if it helps.

Galactic Armory has updated and revised their Inquisitor mask, and I'm helping them attempt to model the hard parts on the belt. Thankfully the Inquisitor wears the typical jackboots, so that'll probably be the easiest part of the build.

Separate post: The mask from Galactic Armory arrived. It looks pretty spot on, we'll see how it holds up when the show comes out. As well, GA agreed to help me research the costume after the show airs and will help me develop any armor pieces or hard parts I may need.

So have been staring like a crazy person at the pictures I have again and think that the rubber at the center front of her costume and on the gauntlets is a rubber window seal. I'm buying a few typs of S and V shapes to do some experiments with that as well. All of my printing supplies have finally come in. I hadn't planned to do it all myself, but paying to have the screens made wasn't cheap and I screwed up the scale of one of the patterns, so I decided to just bite the bullet and buy what I need. I purchased blank screens with the proper thread count for dense prints and but 2 types of emulsion to try. Both are made for high density printing. I found a supplier online that prints the film negative of the pattern for pretty cheap ($10 for my small one and $25 for the larger plus shipping). They arrived in a few days. My next step is to make my first attempt at high density screen today. I'll take pictures and share links and things later. I'm going to start with the glove pattern first since it's small volume. I've also got the pattern for the bodysuit, so I will be adapting that for what I need so I can pattern out the parts for printing. Going to be a lot more activity over the next few months! A friend of mine that loves doing leather work is helping me iwth the armor and she has one of my boots to pattern out the new shaft. I did some initial tests for aging the boot vamp and those worked pretty well. When I get the leather parts back, I'll share images and how I did things for that too.

Big Update: My mask came in and it is gorgeous! I also have the armor finally smooth and ready to paint in a satin black. The soft parts are being worked on now, pleats for the sleeves were just finished recently and were a nightmare to do, the Kylo Ren costumers were right on how bad those were to sew lol.

So excited about this! Going to buy this gorgeous lightsaber from Shadowfoil props when they are ready for order.

I was so excited that I rushed to get all the changes made lol. Here is an updated photo.

Dropping these in here in case you haven’t seen them! Moses Ingram posted some BTS on her Instagram stories today including some shots that show how the costume layers. Hope they help!

All the armor is in the painting phase now and assembling the weapons now. No pictures I wish to share yet except maybe this:

Since I have been asked several times for different characters in GoH, both older and newly released, I'll make one post to hopefully help clear it up! 1. Yes, the current TFE Command and assigned LMOs for TFE support adding GoH versions of characters as eligible for TFE approval/new CRLs, SO LONG as there is a full 360 degrees of reference to show all the details. The view option in game makes that pretty much a non-issue, but we still need the highest resolution possible. 2. If the character in question already has an approved version in TFE, then a couple things can happen: a) If there are no differences between the approved version and the GoH version, then no new CRL is made and it is considered the same as the existing approval for said character. b) If there are differences between the approved version and the GoH version, then a new CRL can be made. In this case, it is considered a New to the Legion Work in Progress (NTTL WIP) and requires an entirely different approval process that includes the TFE Command Costume Staff and the TFE LMO directly. In this case (and any not already approved character, regardless of media source), it is recommended to contact the DL and LMOs directly so that the process can be set up and advisement can be given. In this case, you can contact the LMOs at LMO@501st.com and they will redirect to the proper folks, or email me directly at Nina501st@gmail.com and I can pull in our specific LMOs.

Here's the thing: these are animated characters. There isn't just one right answer because these are like art; the reference can support a handful of interpretations. The armor color is mottled, and is not just one color. I'll give an example of my favorite boots. These are black underneath, and the wax polish on top marked them look anything from grey to dark brown, but I know for a fact that the leather is black because I'm the one who put the polish on. It is the weathering that dictates how people interpret it, but these are what they looked like when I bought them: This is a real world translation of what the armor looks like in the cartoon. Now to the CRL. It is an animated cartoon, and just like 99% of the rest of our CRLs in TFE, the colors change as much as the number of times the character is seen. There is an accepted level of colors on a gradient that could be argued for the character's armor, but that does not make the CRL wrong. We only make CRLs for, "variants" that are approved, otherwise we'd have a 48 page long CRL for Aphra, alone, with all the Barbie dress up versions she has in the comics. So the correct statement isn't, "how can we make it not inaccurate?", but, "do I have the references to validate my interpretation for approval, which can then be ADDED to the existing CRL that already has done so?". The answer to that lies with the Detachment Leader, LMO, and your GML on how well you replicate the references to the real world.

Making them turned out to be very easy for me. I used foam and Worbla. It was the first thing I made with Worbla, so even if you’ve never tried it before you might find it easy enough. You can read my blog about it here if it helps- http://withoutastitchon.blogspot.com/2016/04/mara-jade-knees-and-shin-guards.html?m=1

We're about 1.5 weeks away from all 501st elections! This means Legion level, Detachments, Garrisons, Squads, and Outposts! Make sure you are prepared for TFE Detachment elections by ensuring you are listed as the correct Detachment Member rank. Also check with each Detachment to ensure that you fulfill their specific requirements if they are different! For TFE directions, please see here: I will be doing the final update to the 501st roster for TFE on Jan 28th, so please make sure you are correctly listed (your name should be in orange if you are not part of command). Cheers and long live democracy!

Started fitting this afternoon. Found this image incredibly helpful. Thanks for posting @DarthValkyria

There is no embargo on making a costume - if you can provide the reference pictures of the costume from all sides incl. details and such, it should be good to go. You can also message our DL @DarthValkyria and ask on how to

@Derek 1) I personally used EVA foam clay and shaped and painted the horns the way I liked. Then I attached the dried foam horns to resin bases using Aves Apoxie Sculpt. 2) The CRL says "made of leather or a material that resembles leather". I'd ask your local GML about this. 3) The silver piping on my vest isn't even piping at all. It's simply leather folded in half and stitched onto the vest. 4) Lightsaber is optional, but so long as the length is believable, I don't think anyone is going to be busting out a measuring tape to call you out. If you have any questions, feel free to DM me or hit me up on Instagram @ozark_maul

So, I just started writing out a potential CRL today. My understanding is that the 501st won't be making this a regular CRL but could make it a Legion Level Approval costume. I have been in contact at the Legion level and was instructed to provide a serviceable CRL first.

Did a lot of pattern work today. Mostly on the bodysuit, but I also did some work on the screen prints for the bodysuit (ordered a mirror of the one I already have so I don’t have to laser cut it.) I’ll try and explain what I did a bit. The bodysuit pattern is actually not bad. The sizing is true to what the packaging claims. The only thing I don’t like about it is the weird roundness at the hips. It’s not a natural curve and I had to edit out. I still highly recommend it. this is the pattern I’m using and a link https://www.etsy.com/listing/719618406/catsuit-with-long-sleeve-and-front?ref=yr_purchases I used a curve to adjust the side seam line and I was much happier with the fit. After I did a mock-up I had to cut the pattern into parts. There are 4 panels to the legs but I cut it again at the calf. The reason for this is because my screen size is only 17” x 24”. Doesn’t cover the entire leg and would look terrible pieced together. Since the pleated legging will cover that, I’m not worried about it. More to come on the legging bit. Both the internal and external seams can be seen clearly in the 2 images above. it was tough to get a good image since the pattern pieces are so large. I split both the front and back pattern in half. Then I measured up from my ankle to determine we’re to cut at the calf. I marked which parts will be printed fabric and then cut them all apart. I removed the seam allowance too. I don’t really need a 1/2” allowance and I’ll be serging and trimming the seams down anyway. I prefer to add allowances to the fabric with chalk after I’ve traced the pattern pieces on. The above image shows the vinyl screen I laser cut. It was good to see how things would line up. if you plan to make this costume keep in mind you’ll need 3 screens. One for the gloves and 2 for the bodysuit since there is a left and right slant to the pattern. After I finished this part of the bodysuit I tackled the leggings. Not sure what else to call them. Originally I thought it was all part of the bodysuit but I don’t think that’s the case now. After closer inspection there are a few things that stand out: 1. The stitched gathers at the back of the knee were to tighten the fit, but that wouldn’t be necessary if it was all one bodysuit 2. There is gathered fabric above the pleats which indicates a difference in fabric volume between the legging and bodysuit leg or at least enough pressure from the legging to squeeze the fabric underneath. 3. the calf side of the legging is really lumpy and looks like it’s layered over something else. 4. it is much much easier to make it as a separate part and slip it on. With all this in mind I patterned out a separate part for the leggings. I kind of eyeballed the length needed and made sure I had 6 pleats. I plan to use a doubled layer of fabric that will fold down from the top. That and the pleats themselves should give enough volume but I’ll find out tomorrow. I still have some pattern work to do for the torso and I need to model and mold the greeblies since I couldn’t find practical solution. I also need to patted the gloves. While perusing Etsy, I found a vendor selling patterns for this costume. It consists of the armor, belt, greeblies, and boot covers. So far I don’t have complaints. The sizing seems to be okay, but I’ll need to mock up some of the parts to be sure. I won’t be using the belt as I don’t agree that it’s something other than a straight black belt blank with embellishment. Everything I’ve found so far has odd shaping, but unless you have a hip tilt to accommodate the curve it’s not a good pattern option. I have a belt blank on order and will talk more about it when I have the parts printed. Here is where I got the patterns for the armor: https://www.etsy.com/listing/1255438991/third-sister-inquisitor-reva-costume?ref=yr_purchases

Full makeup test. Getting closer to the colors I’m happy with. Thank god Mehron had a pastel yellow that works!

Finally I did it, boots have been altered and kitted up yesterday completely. I had a brain dump and couldn't work out how to do my hair. Of course, during the night I mentally worked out how I should have done it. Hopefully though it won't hold it up too much and require another full kit up. The boot clips have now been permanently attached in place, so that there is no way of losing them.

Hi Jan! I'm glad to see you are already starting to get some feedback. There used to be a tutorial for creating a Jedi Robe, which my mom modified to create my robe. I believe she shortened the sleeves and altered the hood construction so that there was no visible seam. The site that the tutorial was on looks like it has been archived, but there is a pdf that was saved. I'll attach that. Jedi Sith Robe tutorial pattern.pdf

Was able to do a small swatch test with the glove pattern and I’m much happier with it.

Had a productive day today. But I’m going to share a little of the drama. Originally I had a screen shop make 2 screens for me. It was expensive. Unfortunately one of the patterns was sized wrong. Since the screens were expensive I decided to make one myself. Cut sad music. Making a high density screen with emulsion is not done often for a reason. It takes a lot of skill. Usually a capillary film is used, but I just couldn’t justify the cost. The cheapest I found in a good size was over $100US. No thank you. Luckily I have some knowledgeable people at work. I finally have a screen I can burn (it’s drying as I type this) The screen that was the right size wasn’t very thick so I wasn’t sure what the result would be. Unfortunately the fabric I’m using shrinks significantly under the high heat used to cure the ink which made multiple passes impossible, but I’m happy with the result. The color in the images is washed out a bit. The ink is actually grey. Now I will get my pattern sorted and I’ll do the final prints.

When I first saw it, I thought it was Darth Reaper from Overwatch. I am excited to see this one play out!

Great find by @Trachta! Custom belt for Reva on Etsy. I’ll need to customize it a bit to make it more accurate, but it’s one less thing to build myself. :) https://www.etsy.com/listing/1265073920/third-sister-belt-reva?click_key=53f5f3b76d0ba3cedeaf7830e93173ef209efb8d%3A1265073920&click_sum=3cff8fd3&ref=shop_home_active_29&sts=1

I was just looking into this too. Great minds think alike.

Lightsaber update By now I'm sure you've seen it on tic tok and instagram, the LGT Grand Inquisitor *inspired* lightsaber. I knew this would happen. I knew I'd finish this costume and then with the release of Kenobi someone would finally make the Grand Inquisitor lightsaber for real. I just thought it would be the live action version and not rebels version. But here we are. So surprise I bought it. Dark Wolf had the best price I could find for it at $650 for a xeno pixel. I still have no idea what the difference between a xeno and a proffie is but I wanted to save $100 and try it out. My opinions on this saber... It's cool but could be better. Not as much of a fan of the xeno pixel option vs the proffie. The effects are all the same like clash and tip drag and fonts are all the same pretty much, but the proffie does a much better job executing these effects. For example on the proffie for clash effect, hold the button and hit the blade and it will clash until you release the button, and the sound will resonate for an extra second like a thunder clap. With the xeno option the sound just stops abruptly when you release the button. Same difference with the other effects as well. Just seems to me like even with the price difference, it doesn't seem like the sounds should be this different especially with it still being expensive. The hilt itself I think looks very nice. It's not a replica but inspired so I know it looks different than the show. Mostly the polished aluminum shouldn't be a thing here. The hilt should be a gun metal, dark grey, not polished aluminum. Besides that, looks-wise, it's a nice hilt. It folds and has the red buttons (fake buttons) on either side. There is a squeak sound on mine that I can't figure out where its coming from. Either squeaking in the chassis or on the metal shroud around the grip, I'm not sure. There are several moving parts on this hilt so I guess that is to be expected. One concern I do have is for the battery life. I have not found an option on the xeno pixel that will tell me the battery percentage like the proffie does. And with this being two blades on a single battery I fear it will not last nearly as long. I've noticed after playing with it for a while, changing fonts over and over and playing music on it, the top blade tends to not light properly after a while. Like its too much to keep both blades going especially with the music also playing. Maybe its a connection issue to the blade but idk. Also have found that if opening and closing the rings this sometimes makes the blade connection go bad because of how it all screws together. So overall, it's a really nice one, but some things could function better especially for this price. And for it being the ONLY metal hilt Grand Inquisitor lightsaber, probably everyone in this group should get one.

Yay! You're welcome for the help, and I'm excited to see this build happening and that my creation of this CRL was an inspiration! Here are some more answers to your questions: -Make sure your poncho color is lighter and less blue than the arm inserts. I had a *really* hard time correctly capturing the poncho color via photos. When in doubt, try to match the comic book color over the photos in the CRL 🙂 -Yes, there is a little bit of blue in the arm insert color. I noticed this in the comic book and added a tiny bit of denim blue to my dye bath to get it to match. -I'm attaching a photo of my poncho instructions I made for myself, so hopefully this will answer your questions on this topic. Sorry if the stitch callouts look confusing - I did them like weld callouts since I'm an Engineer and I was writing this for myself. 🤓 But if you come up with a construction that works for you, go for it! I opted for this to minimize visible seams and make it look as comic booky as possible. -For the small blaster, my husband modeled it from scratch in CAD (he's an Engineer too!), and we have 3D print files that you (or any other TFE members or prospective members reading this) are free to use if you wish! I just have to find them and will add them to this thread when I do. I would think a piece of orange tape on the end would suffice where orange tips are required, but I don't know for certain, as I never needed to do this. -For the bag, there is a frame in the comic book that I'm pretty certain is in my build thread with Mara's hand over the side of the bag. That's what I used for scaling. I made a bag out of paper and tape to check the porportions before cutting leather. As for the leather, I bought a 5 oz (I think) veg tan shoulder from Tandy a while ago that I've been using for several things, so that's what I used for the bag. You could certainly go thicker though! Let me know if you have any other questions, or free to reach out!

Progress on the boots by Crowprops.

Just a head's up, we only have 1 active approved member with this costume, so specific assistance will be very limited. BUT, we can do our best to assist with any build questions.

I am approved with both versions of the wicked armor Nihilus. You have to add to both a bit to do it. The KOTOR2 mask they make would probably be approvable, but I changed the center detail to match the CRL better. You will also need to add the chest padding. I used a sheet of open cell foam, cut to fit. I recommend a different obi, but the one they sew into the skirt is approvable. In all cases, the wicked armor will give you the materials to do it, but go through the CRL and make it match up once you have it in hand.

Hi! Can i ask you what fabrics did you used? I'm getting mad searching and i'm not happy with my findings... T_T

From the words of the costume advisors, that is correct.

Now it's really just neck seal!! (Please say saber is an option lol) The shoulder was smaller than the size I ordered but it's not bad for right now I think. Probably I'll slowly rebuild it later ;^)

Hello everyone, I have put together my Darth Revan build and summitted it for approval. I need to send more close up pics and stuff, but it was suggested to post here as well to get opinions from current members that had approved costumes. But I am not exactly sure where to post the pics at. Obviously the lightsabers are not part of the actual build, but this is the full costume minus BOOTS and actual PANTS which I was looking for ideas on where or what to buy. Thanks in advance for the help,

Hi I used a normal shirt pattern for the tunics and moded it so it fit - the same with the skirts, and just winged it, so sadly I don´t have an exact pattern for them.

The CRL is not needed for first approval. It will be wrote as the first person puts in a costume to be judged. My write up is information that has been gathered from the Second Sisters Build Group on facebook (which has really great hi-res images to help you). To submit you will need to gather your references. A 360 of the character is recommended as well as close ups of details. The level of available reference material is amazing, so they'll probably be looking for something as accurate as can be translated from a 3D game character. Once you have the outfit built, take the appropriate photos for submissions. The Flagship Eclipse is the detachment and you can find further instruction on submission and contacting your unit here: https://databank.501st.com/databank/Join_Us

She also appears in the Star Wars Galaxy of Heroes mobile game, and the character selection screen gives a rotatable 360* model.