Leaderboard

Just a quick update on what's going on with the detachment stuff since it's been a quiet period (not always a bad thing!). 1. We're actively designing merch for a racing shirt, patch, and coin themed for KOTOR 20th based on votes. These will come in the next few months. It is slow due to lack of artists available and, well, life. 2. We're working on 3 New to the Legion CRLs/costumes currently that we're hoping to be released before the end of the term in Feb after updates to the costumes are finished. 3. We were told by LMOs that we had to wait until the end of the season of Ahsoka before submitting requests for assignment of the costumes. But, after the short, "please don't spoil the episode for us" request time, we're submitting for Shin, Baylan, Morgan, Marrok, and all 3 Great Mothers to be assigned to TFE. 4. We're still looking for artists and a new Programs Officer if you're interested/able to assist the Detachment! If you have any other requests or ideas, please feel free to comment or message me!

Hi everyone! Finally got my butt in gear and got my clone wars asajj approved and hopefully the first of many asajj approvals for me. I made every single aspect (except my lightsaber) from scratch without much experience before so I’m really proud of this one 😊🥰 I’m a brand new member of the pikes peak squad and the mountain garrison! Excited for all the new experiences to come 💕

Hello everyone, I’m Daisy from the Dutch Garrison and together with Rikki I have been assigned as your LMO team for this term. About Me: My name is Daisy van Rijn, and this is my second term as a 501st Legion Membership Officer. I have eight approved 501st costumes, four in the Rebel Legion and I have a Seventh Sister costume that I'm hoping to finish this year. I have been sewing since I was 19 and love sharing that acquired knowledge with others. I'm excited to be able to assist you this year with the TFE Detachment as I have a large love for the Old Republic Era. What is an LMO? The Legion Membership Team is responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officers drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with member’s costumes. Have a question about membership these are the folks to talk to! There are LMOs you can contact at any time at Legion Officers however Rikki and I are the ones who are assigned to the Imperial Gunnery Corps this term. Thinking of starting a NTTL (New to the Legion) Costume? Please message the Detachment and me here as well as send a link to your build thread. I love researching new costumes and helping. Worried a costume may or may not be eligible for the Legion approval? https://databank.501st.com/databank/Costuming:CRLGuide See Character Approval and New to the Legion Costumes (NTTL) sections for details. For “New to the Legion” costumes please also have a look here: Costuming Standards Have a question? Do not hesitate to message me. Get your references together and sent to LMO (at) 501st (dot) com.

It's finally here! Galactic Armory's V2 mask. Much more detailed and accurate than the old version. I figure I can fit red LEDs into the eye sockets to emulate the eyes.

Just as a head's up to anyone interested in doing this costume: It has been agreed that so long as the visible parts of this costume match the references available, I am good with allowing the missing parts to be supplemented from Eleena Daaru's references. With that, I look forward to seeing a high quality submission soon!

New guy here! I've been working on a spinning GI saber for a bit and it's starting to come along. I have a youtube channel documenting the build but I also wanted a build log for better documentation and thought 'what better place then with people who can give me some sound guidance.' So here I am! Looking forward to chatting with you grand folks. I'm pretty far along in the project, so I'll be updating this log until it catches up with progress.

Try everything on Boots & gloves are from Crowprops And now I'm searching for armors

Soooooo, figured I'd give it a go with trying to make the outfit for Ventress from the Bad Batch episode. I wanted to do some research first and try out a few things before moving forward with this on here (FE forum) as a thread. I'm going to post things that I have already played around with, along with moving forward for stuff I will be doing in future. A thank you to folks who have posted pictures on the Facebook group. It has helped immensely and I will be including some of them in this build. Please keep in mind I am having a hard time with getting my phone to take pictures of the colors so I did invest in two Pantone booklets Pantone GP1601B 2022 Edition Coated and Uncoated Guide. I have been making notes of the colors of the fabric to compare to what I have seen on the different screen from the show. I will be pointing them out in the photos so people can check the colors and whatnot. I'm currently working on the prints for the tunic and the two outer collars and short sleeves. I worked on the patterns in a program called Creative Space that is used with the xTool Laser machines. They have a silk screen printing machine which "sort of" works with what I am trying to accomplish. The fabric for the tunic and the outer collars I am choosing to use Scuba knit fabric. Partly due to it laying down smoothly on a human body, two it has stretch, which shows up on the upper sleeves of the lighter fabric (see following image of upper arm) and it's in tribute to the fact that this episode deals with water and an island (this particular part will continue with some other parts of my build that I will share when I get to them). So, I guess I'll start with the pattern for the collars and short sleeves. I looked online and in some of my books to see if I could find a woven pattern that could be bought or even hand woven on a loom (I have a loom). But there is no actual weave for this pattern. There is something close, but it was definitely different. And physically it wouldn't present itself well for a fabric as it would be too loose of a weave and not look like what is in the cartoon. But this is just my personal judgement call. I have decided to go ahead and make a print of the pattern and silk screen it onto the fabric. My first attempt I felt was too uniform and didn't have the same feel as the cartoon. So I went back and reworked the edges of the lines and reshaped as well as resized the pattern. I worked on the counting of the height of the repeat of the print to the collars and to the cartoons neck and my real neck. I sized the print accordingly to "hopefully" work for myself. I'm still working on alignment for repeating the pattern on fabric, but I have pictures to show what I have so far. When I am done with printing it, I will be going back over the fabric with another layer of transparent paint with more of a light coffee stain color to match the color in the show. There are areas around the seams and edges of the collar where the material is lighter, closer to ivory. I am working with the ivory colored fabric to see if I can keep some of that coloring in and around the collars edges. For now I am just working on the printed part. I have been hand mixing my colors. I am using a mixture of Speedball water based inks. After making the changes to make the pattern feel more organic The following section deals with the blue printed fabric on her tunic. Boy this is an oddball fabric but I think I have it pretty much figured out. Though I do have questions about pattern repeats, but I will continue with that at the end of this post. The main part of the issue is finding a way to have the pattern show up in light but not as much in darker shadowy areas. After studying different images of her outfit in the light and dark (and even when it is wet and in the light) I came to the conclusion that the print itself is a semi gloss coating on the surface of the fabric. BUT, when you put a coating of say acrylic clear coat it turns darker when printed on. I also noted that even with the "clear" print on top some areas of the fabric had a "painterly" feel to it. I ended up getting a teal colored scuba fabric and then painted it in long strokes with a sponge and a translucent paint mixture (of transparent, white, blue and a dash of yellow) that soaked up mostly into the fabric, giving it a ghostly painterly look as the base and making the color a bit lighter than the original fabric which I found to be too intense for the base color. I also decided to try out a oil based paint for the clear coat on top of the fabric. This seems to do the trick on a synthetic material (natural cotton did seem to absorb some of the ink and make it darker). As with the collar and sleeve pattern I had made an initial pattern but felt it to be too angular and modified it to look more organic with slight curves and I also resized the pattern to match the size of myself. Being a bit larger than Ventress I opted to go with a few rows more in the sizing to keep in ratio with what is in the cartoon. So far I have some of the fabric painted with the translucent white mixture along with trying to print a repeat pattern on the fabric with the oil based transparent paint. I'm having a bit of an issue with getting the pattern exactly aligned up. Which is where I am at the moment. My question so far is how close does the pattern have to match? I have pictures included for folks to look at. I might be able to stabilize some of the printed pattern and wash out part of the other sections and try again when the fabric is dry. But if I don't have to do it, I'd rather not as it is already a massive undertaking. showing the best copy of the neoprene fabric that I have (on the right). The fabric on the left is a stretch cotton wool blend that didn't work out in my testing. But I have found that between the paint and the clear coat it lightens up and has an overall feel/look of the fabric on the left. You can see the brush strokes of lighter colored paint on the fabric. printed clear coat on top of fabric so far. How it interacts with light and shadow. Highlights on left are from inside light and outside light on the right. in slight motion (blurred like in many screen shots from her movement) same angle but not in motion and shows how it blends into the fabric when in neutral lighting. Couple of reference shots I'll leave it here for now and hope to get feed back sooner than later.

Finished product!

While working on the other gauntlet, I figured I'd work on other stuff as well, including her pauldron. Including pics of it and hers for reference.

Okay! So I now have a painted blaster! I also worked on the blade modeling over the last day and today and I am currently printing it out. I am adding pictures of it from Blender. When it's done I will updated this post to include the printed version. Anyways, here are some pictures... cause we all love progress pictures! Enjoy Blade

So I've gotten some stuff done. I decided to try on what I have so far. I'm working on finishing the boots. Just got the backpack pinned to the shoulder straps and x straps along the back. I'm going to be adding some Sintra or thin metal to help the shoulder straps keep their shape and prevent the sagging in the back. Pouches are almost completely done. I had to blue tape the small additional pouches on the backpack, but they kept falling off. I'm happy with how they look so I plan on gluing them down. I also started on the belt. I have to make the second layer and fix up the side where her light saber hangs. and I also have to make a mount for the lightsaber. I also started working on the bracers. Played around with a concept which seems to have worked so I am moving forward with it. When I'm further along with them I'll post pictures. Once I have the boots finished, the backpack and straps finished, and the belt finished, I'll start modeling the blaster and the knife. Then make the holster and sheath. Either way, please excuse the untidiness of everything and that my husband took a few weird photos. Oh and pinning through multiple layers of leather and neoprene sucks. And pliers are important!!

I’m very excited to announce… Thats right! The costume is now completely assembled. Now the next steps I’m not entirely sure. I imagine some tweaks may need to be made or what not but I have never made a CRL before so I guess we’ll see. Any advice is appreciated!

Hello from France (but like one foot in Belgium and one in France) I'm Antoine (but prefere my nickname Gaz😀) SL-62477 🙌 I have my Darth Revan approuved this month and proud to be part of the 501st / The Flagship Eclipse detachment after some trooping invitations with the Belgian Garrison 🤝 And special thanks to @VadeRick62023 for time and patience

Hi all. I'm Tracy. I recently got approved in the IOC for an ISB officer to be able to troop sooner. I have to big goals with costumes. One is Grand Admiral Thrawn. And the other, which I anticipate will be much more complicated, is the Grand Inquisitor. I get the feeling I'll be working on it for awhile, but got to start somewhere, and will be asking a lot of questions. I'm based in the Pensacola area of Florida, but I'm a travel RN right now so will be seeing many different areas. Don't have my tools with me right now, but I can plan. I hope to make as much of the Grand Inquisitor costume as I can. In the process, learning a lot about makeup and masks and armor. If it something more than I can do, I hope you all can help me.

Hi everyone! I absolutely loved The Acolyte and I am happy to start a build thread for this super comfy Osha outfit! I have been mostly in the research phase, but I am hoping to start this build very soon. To start, I do have a rough write-up started as well as an album of reference images. I'll link the gallery here :) Here's an overview of my build plans; - Wig: I have 3B/3C curls, but I am dedicated to my current hairstyle. As such I have been looking for a wig either already curled, or a wig I can curl, in as close colors as possible. I might have to custom dye a wig but we shall see! For a visual idea, here's a few ideas I found from Amazon and a couple other wig websites; wig 1, wig 2, wig 3, wig 4, wig 5 - Hoodie: I think my current plan is to use my favorite knit shirt pattern (Simplicity 9226), modifying it by cropping it in the right spot, adding the under layer, and extending the sleeves/adding the shoulder cut-outs. I'll probably dig through my stash for a hood pattern, but otherwise I might be able to draft it myself. For fabric, I am thinking of using either ponte de roma knit or scuba knit. I am not ready for the possibility of dyeing more grey fabric so I am hoping to find some already in the correct color. - Pants: They look like pretty simple leggings. I have a couple of patterns for leggings, but might also try my hand at pattern drafting if I can't find a pre-made pair. I'll be making them from a charcoal grey ribbed knit. - Boots: Looking at references, they appear to be calf-height black leather boots with a suede over layer and flat soles. I'll probably look around for a base pair of leather boots (either second-hand or I'll look online too!) and add the suede myself. - Saber: My cosplay partner HiraethSolo is working on Qimir, so I'll probably lovingly borrow it from him. I'm not sure what he wants to do though, so I will look at options - Knife: I am looking at one of these options on Etsy, and hopefully will print them myself once the printer is working. ImperialArmorSurplus or BigFredsCustoms. - Tank top configuration: The tank top configuration removes the hoodie and is a matching rib knit as the pants. It also features her arm tattoo. I'll probably design some temporary tattoos, and will make the tank top myself unless I can find the tank top and pants in the wild to purchase. Let me know if you have any questions or advice!

Posting a few pictures of how it's going. I'm almost done with the main tunic. I'm working on finalizing the shape for the black vest. Also, I tossed in a beginning of a boot to show the direction I'm going with it. I'll be using a zipper and hook and eye closure for the back of the collar. I'm also planning on raising the inner black collar about 1/4". Leggings are pretty much done. I have to hem the bottoms, but I won't do that part until I have the boots on the go. I'm very happy with it so far. I have black gloves. I'm still thinking which is the best way to make the gauntlets (I have a few ideas in mind and have a couple of different kinds of materials to play with). I'm pretty excited about how this is turning out.

Hi folks, I just wanted to share some of the pics I took during my shooting at the Georges Henri park in Brussels

Korbanth has a Savage hilt for sale: https://korbanth.com/empty-double-sided-staff-the-oppressor

So close to being done. I need to redo the arm guards and chest armor and shorten the bottom corset pieces.

Today was play with makeup... I didn't get around to doing the back of the head tattoos. I do plan on making a stencil for that part. This took around 2 1/2hrs. Still learning the best way to work with the materials. I think I did a pretty good job.

I found this on StarWars.com if it helps.

Galactic Armory has updated and revised their Inquisitor mask, and I'm helping them attempt to model the hard parts on the belt. Thankfully the Inquisitor wears the typical jackboots, so that'll probably be the easiest part of the build.

Separate post: The mask from Galactic Armory arrived. It looks pretty spot on, we'll see how it holds up when the show comes out. As well, GA agreed to help me research the costume after the show airs and will help me develop any armor pieces or hard parts I may need.

So have been staring like a crazy person at the pictures I have again and think that the rubber at the center front of her costume and on the gauntlets is a rubber window seal. I'm buying a few typs of S and V shapes to do some experiments with that as well. All of my printing supplies have finally come in. I hadn't planned to do it all myself, but paying to have the screens made wasn't cheap and I screwed up the scale of one of the patterns, so I decided to just bite the bullet and buy what I need. I purchased blank screens with the proper thread count for dense prints and but 2 types of emulsion to try. Both are made for high density printing. I found a supplier online that prints the film negative of the pattern for pretty cheap ($10 for my small one and $25 for the larger plus shipping). They arrived in a few days. My next step is to make my first attempt at high density screen today. I'll take pictures and share links and things later. I'm going to start with the glove pattern first since it's small volume. I've also got the pattern for the bodysuit, so I will be adapting that for what I need so I can pattern out the parts for printing. Going to be a lot more activity over the next few months! A friend of mine that loves doing leather work is helping me iwth the armor and she has one of my boots to pattern out the new shaft. I did some initial tests for aging the boot vamp and those worked pretty well. When I get the leather parts back, I'll share images and how I did things for that too.

Big Update: My mask came in and it is gorgeous! I also have the armor finally smooth and ready to paint in a satin black. The soft parts are being worked on now, pleats for the sleeves were just finished recently and were a nightmare to do, the Kylo Ren costumers were right on how bad those were to sew lol.

So excited about this! Going to buy this gorgeous lightsaber from Shadowfoil props when they are ready for order.

I was so excited that I rushed to get all the changes made lol. Here is an updated photo.

Dropping these in here in case you haven’t seen them! Moses Ingram posted some BTS on her Instagram stories today including some shots that show how the costume layers. Hope they help!

Yay! You're welcome for the help, and I'm excited to see this build happening and that my creation of this CRL was an inspiration! Here are some more answers to your questions: -Make sure your poncho color is lighter and less blue than the arm inserts. I had a *really* hard time correctly capturing the poncho color via photos. When in doubt, try to match the comic book color over the photos in the CRL 🙂 -Yes, there is a little bit of blue in the arm insert color. I noticed this in the comic book and added a tiny bit of denim blue to my dye bath to get it to match. -I'm attaching a photo of my poncho instructions I made for myself, so hopefully this will answer your questions on this topic. Sorry if the stitch callouts look confusing - I did them like weld callouts since I'm an Engineer and I was writing this for myself. 🤓 But if you come up with a construction that works for you, go for it! I opted for this to minimize visible seams and make it look as comic booky as possible. -For the small blaster, my husband modeled it from scratch in CAD (he's an Engineer too!), and we have 3D print files that you (or any other TFE members or prospective members reading this) are free to use if you wish! I just have to find them and will add them to this thread when I do. I would think a piece of orange tape on the end would suffice where orange tips are required, but I don't know for certain, as I never needed to do this. -For the bag, there is a frame in the comic book that I'm pretty certain is in my build thread with Mara's hand over the side of the bag. That's what I used for scaling. I made a bag out of paper and tape to check the porportions before cutting leather. As for the leather, I bought a 5 oz (I think) veg tan shoulder from Tandy a while ago that I've been using for several things, so that's what I used for the bag. You could certainly go thicker though! Let me know if you have any other questions, or free to reach out!

All the armor is in the painting phase now and assembling the weapons now. No pictures I wish to share yet except maybe this:

Since I have been asked several times for different characters in GoH, both older and newly released, I'll make one post to hopefully help clear it up! 1. Yes, the current TFE Command and assigned LMOs for TFE support adding GoH versions of characters as eligible for TFE approval/new CRLs, SO LONG as there is a full 360 degrees of reference to show all the details. The view option in game makes that pretty much a non-issue, but we still need the highest resolution possible. 2. If the character in question already has an approved version in TFE, then a couple things can happen: a) If there are no differences between the approved version and the GoH version, then no new CRL is made and it is considered the same as the existing approval for said character. b) If there are differences between the approved version and the GoH version, then a new CRL can be made. In this case, it is considered a New to the Legion Work in Progress (NTTL WIP) and requires an entirely different approval process that includes the TFE Command Costume Staff and the TFE LMO directly. In this case (and any not already approved character, regardless of media source), it is recommended to contact the DL and LMOs directly so that the process can be set up and advisement can be given. In this case, you can contact the LMOs at LMO@501st.com and they will redirect to the proper folks, or email me directly at Nina501st@gmail.com and I can pull in our specific LMOs.

This is super well done! I loved seeing this look from Asajj in the show and you captured it perfectly. Heres hoping the whatever is putting new CRLs on hold is finished soon so this can be made official hopefully. I don’t know how much longer I can calibrate my enthusiasm haha

Finished the chestpiece and added a AAA powered LED strip behind the red lens. I used on of the LED strips they use for backlighting eyes in masks like Iron Man and just rewired it to be one like instead of two in parallel. Finally got everything done 🎉

Hey Todd, I see what you mean about the eye shape and nose vents. Just a suggestion from Ryan, since I was asking him about the feasibility of modifying .stl files, if you bring up the discrepancies to GA, they may be willing to modify their file, especially if you tell them that you want to use it for the CRL. Ryan brought up something in a Bad Batch build group about an inaccuracy in their Wrecker armor, and the GA guy saw it and fixed the file a couple days later.

Hey people, LucasFilm and Disney just announced a new show coming named "Tales of the Empire"! And the unknown inquisitor is also in it! Hopefully this will help everybody to make the costume perfect

Racing shirt is in the works!

@Derek 1) I personally used EVA foam clay and shaped and painted the horns the way I liked. Then I attached the dried foam horns to resin bases using Aves Apoxie Sculpt. 2) The CRL says "made of leather or a material that resembles leather". I'd ask your local GML about this. 3) The silver piping on my vest isn't even piping at all. It's simply leather folded in half and stitched onto the vest. 4) Lightsaber is optional, but so long as the length is believable, I don't think anyone is going to be busting out a measuring tape to call you out. If you have any questions, feel free to DM me or hit me up on Instagram @ozark_maul

Did a lot of pattern work today. Mostly on the bodysuit, but I also did some work on the screen prints for the bodysuit (ordered a mirror of the one I already have so I don’t have to laser cut it.) I’ll try and explain what I did a bit. The bodysuit pattern is actually not bad. The sizing is true to what the packaging claims. The only thing I don’t like about it is the weird roundness at the hips. It’s not a natural curve and I had to edit out. I still highly recommend it. this is the pattern I’m using and a link https://www.etsy.com/listing/719618406/catsuit-with-long-sleeve-and-front?ref=yr_purchases I used a curve to adjust the side seam line and I was much happier with the fit. After I did a mock-up I had to cut the pattern into parts. There are 4 panels to the legs but I cut it again at the calf. The reason for this is because my screen size is only 17” x 24”. Doesn’t cover the entire leg and would look terrible pieced together. Since the pleated legging will cover that, I’m not worried about it. More to come on the legging bit. Both the internal and external seams can be seen clearly in the 2 images above. it was tough to get a good image since the pattern pieces are so large. I split both the front and back pattern in half. Then I measured up from my ankle to determine we’re to cut at the calf. I marked which parts will be printed fabric and then cut them all apart. I removed the seam allowance too. I don’t really need a 1/2” allowance and I’ll be serging and trimming the seams down anyway. I prefer to add allowances to the fabric with chalk after I’ve traced the pattern pieces on. The above image shows the vinyl screen I laser cut. It was good to see how things would line up. if you plan to make this costume keep in mind you’ll need 3 screens. One for the gloves and 2 for the bodysuit since there is a left and right slant to the pattern. After I finished this part of the bodysuit I tackled the leggings. Not sure what else to call them. Originally I thought it was all part of the bodysuit but I don’t think that’s the case now. After closer inspection there are a few things that stand out: 1. The stitched gathers at the back of the knee were to tighten the fit, but that wouldn’t be necessary if it was all one bodysuit 2. There is gathered fabric above the pleats which indicates a difference in fabric volume between the legging and bodysuit leg or at least enough pressure from the legging to squeeze the fabric underneath. 3. the calf side of the legging is really lumpy and looks like it’s layered over something else. 4. it is much much easier to make it as a separate part and slip it on. With all this in mind I patterned out a separate part for the leggings. I kind of eyeballed the length needed and made sure I had 6 pleats. I plan to use a doubled layer of fabric that will fold down from the top. That and the pleats themselves should give enough volume but I’ll find out tomorrow. I still have some pattern work to do for the torso and I need to model and mold the greeblies since I couldn’t find practical solution. I also need to patted the gloves. While perusing Etsy, I found a vendor selling patterns for this costume. It consists of the armor, belt, greeblies, and boot covers. So far I don’t have complaints. The sizing seems to be okay, but I’ll need to mock up some of the parts to be sure. I won’t be using the belt as I don’t agree that it’s something other than a straight black belt blank with embellishment. Everything I’ve found so far has odd shaping, but unless you have a hip tilt to accommodate the curve it’s not a good pattern option. I have a belt blank on order and will talk more about it when I have the parts printed. Here is where I got the patterns for the armor: https://www.etsy.com/listing/1255438991/third-sister-inquisitor-reva-costume?ref=yr_purchases

Ok, full suit up day! Still have lots of finishing touches and I'm just using a pair of underarmor running gloves until I finish the gloves, but this is all the pieces. Double cloaks, bracers, belts, etc. Also did a walking test outside and the double cloaks look awesome when walking. Link to other pics.

Ok, a few updates. Outer cloak is almost done. I stenciled the large shoulder cogs today and once they dry will touch them up and that should be done. Inner cloak is almost done, just need to finish and attach the half cog clasp. Also pictured are the bracers and lighted belt boxes. Will need to design and print the elbow guards to attach to the bottom of the bracers. Progress!

Great find by @Trachta! Custom belt for Reva on Etsy. I’ll need to customize it a bit to make it more accurate, but it’s one less thing to build myself. :) https://www.etsy.com/listing/1265073920/third-sister-belt-reva?click_key=53f5f3b76d0ba3cedeaf7830e93173ef209efb8d%3A1265073920&click_sum=3cff8fd3&ref=shop_home_active_29&sts=1

Not saying these would or wouldn't pass basic... But shirt should have 15 vertical ribs, not 26. Colors overall look pretty spot on to me. The fly should be a rectangular panel and not just a regular fly. Could be an easy change to just sew a rectangle of fabric over that area. Once you have boots just be sure the pants are long enough because they look disproportionally short in the pics. For the armor JMS and Tristone props on etsy are the only creators I know of for this armor. If you have a garrison mate with a printer that's the way I did it because I don't have a printer either. Magmel creations on etsy for the belt is an option.

Similar to the BHG Greedo CRL that is being grandfathered in 6 months due to inaccuracies and lack of member desire to correct them, we have decided, along with LMOs, that the Starkiller: Dark Apprentice Robes CRL will be grandfathered 6 months from today (October 1st, 2022). There is only 1 member approved with this costume, and they have previously responded that they do not intend to update the costume to better suit the references. Given this, if any other members want to work with the Detachment to improve the costume, then the CRL can stay published. Once grandfathered, any new costumes of this CRL must go through a full NTTL process.

Given the slightly relaxed state of the current LMOs over Legends material, I'm revisiting the possibility of this one being approvable. So far, they seem very receptive to the idea given the tiny amount that isn't able to be seen.

I am approved with both versions of the wicked armor Nihilus. You have to add to both a bit to do it. The KOTOR2 mask they make would probably be approvable, but I changed the center detail to match the CRL better. You will also need to add the chest padding. I used a sheet of open cell foam, cut to fit. I recommend a different obi, but the one they sew into the skirt is approvable. In all cases, the wicked armor will give you the materials to do it, but go through the CRL and make it match up once you have it in hand.

Neck seal arrived!!! And now I'm waiting for the lightsaber.

From the words of the costume advisors, that is correct.

Belt & Rank bar from PHprops