en-zozallow

Ok so first test fitting what you guys think?

Very carefully remove the plastic silver covers try not to damage the leather straps. Once you done that cut the straps at the middle of the area that was covered by the silver plastic cover you just removed. Now measure where the ring should be and glue the silver plastic back working like extensions . The missing leather is then cover by the silver covers If you did damage the exposed now leather straps use acrylic balck and silver to re paint it and bob is you uncle

One thing you will need to change as i also had to get it approved was the Big Ring in the in game reference it hangs lower than what MWA has placed it you want the top of the ring to be the only part that is on top of the armour and the rest of the ring should hang just infornt of your private parts just like this

H means Martin Miller CRL model for TIE Starkiller http://www.501st.com/databank/Costuming ... e_training Are you building this ? I am currently working on mine to you can find my WIP here viewtopic.php?f=73&t=2524

with regards to the question of the 3 perfect aligned folds again depends on if you are going for approval with your local garrison so the safest thing to do is ask your local GML on EU if he is here then he will be able to anser your question in this thread ..................................... One thing that i do find hard is that do to the fact that each garrison judges its own local memebrs there are discrepancies on standars with some people getting approved with basic standars and other having to do loads of changes to meet the critiria

Well I know you have been supporting my claim that Revan should be allowed in the RL so from that point im sure they will come up with a final desicion on the sabers but on the 501st CRL they show a completely different saber with no image reference to KOTOR II You dont need a saber to get approved bu in my garrison UKG you can only get approved with the one from wookipedia so it will be good to ask your local 501st GML Remember that the 501st deals with approval by GML at a local level not world wide like the RL so your best bet is contacting SOCAL Garrison GML for the right saber

what saber are you using? there has been loads of threads on which one is revans saber with wookipedia showing this one or are you looking to do SWTOR saber

Hello There Welcome to the Flagship Eclipse .. really looking forward to your WIP on Revan

Do you have an image of the saber you bought? or could you post some images once you get it Ta

nice how much was that ? i need a revan saber but i think we will make it from the costume saber shop parts and follow this style of saber

Here are some images of last weekends comic expo I was Revan hope you like them

OK so first coat of silver done its now weathering and attaching leather straps to the shoulders

First i built a mannequin so the armor could be casted for my body shape Ok for the Saber this is my saber from VV and JQ number 20 out of 25 in the world Ok So a few updates from my armour work in progress pictures from Mandalorian arsenal He is doing an awesome job

yes indeed its beautiful and sorry i said his i didn't know it was a woman for that i have to say she has done an amazing job at her Revan costume. to bad its not canon

True have you tried makoto Tsai ? he makes a cheaper version of the star killer saber from 300 to 600 usd this is his face book page https://www.facebook.com/makoto.tsai?fref=ts if you are going to make one i have some pictures of mine in my website hope they are of help for reference http://www.alanmolina.co.uk/wip

Tfu starkiller are expensive i am the proud owner of number 20 of 25 on vaders vault first run. They are selling at 2600 usd now days If you di get ine you will own history

l like the detail of the armour but i agree this Revan is not canon also the clasps at the top will need to be replaced to something like this also the mask looks more like the mask used in SWTOR and not the KOTOR mask another thing i can see is that his under shirt has a pattern texture like breathing holes needs to be black solid no texture

Looking good I am also a member of the RL and seen your Slave Leia and im sure you will rock this new costume

Not sure what happens behind the scene . my GML needs to contact the legion GML? I did selected my SL id SL33961 but i am awaiting confrimation that the process has been completed this is what my GML wrote to me Yerrp, just see it in the main 501st UKG membership rota pending list. For some reason your requested numbers were not there so I put in 33961 and 39613 and processed your request as 'Ready For Duty'. Hopefully you should get a mail through pretty soon from the 501st confirming your processed and APPROVED application I'll keep an eye out on my side and if I see any problems I'll give them a kick up the backside and gee them up to get it sorted. Take care mate Billy

.Dear Alan Molina, Your clearance submission for the costume of 'Darth Revan' has been reviewed by the GML. Congratulations! Your costume has been cleared for trooping. We are pleased to welcome your Darth Revan into the ranks of the UK Garrison. Sith Lord status in the 501st !!!!

Thats what i thought to In the RL we have judges for the whole RL not Garrison based this way all standars are the same this is what i need to do from my GML "The ring that the red sash hangs from needs lowering so that the top is only just sat on the abs armour. The hood needs an alteration making so that it is more of a cowl, having an connecting piece of fabric at the bottom, runing along the chest just above the armor. The undershirt also needs a seam running horizontal across the upper chest." I did asked for images to do this because i could not find this on the CRL by en-zozallow » Mon, 25 Mar 2013 6:26 pm And yes i have a back plate . So for the cowl is that the same material of the hood just wrAp behind the armor or do i need to get more material I cant really see this extra material on the 501st CRL Same as the ring that low Is there an image where this ring is that low? And if there is why is it not on the CRL ? I do see that im missing the pipping on the under shirt From the CRL Are we not using the CRL for costume approval? http://www.501st.com/databank/Costuming:SL_revan GML repply CRLs are just guidelines mate for explaining aras of the costume. Just because something is missing from it doesn't mean that it shouldn't be on the costume. I look at images of a persons outfit and compare it to reference images of the character, its easier that way. The material at the bottom of the cowl, I'd just get a piece of similar material to what the rest is made from and attach it to the inside to mimic the look. As for the piping, that is what I refered to as the seam running along the upper chest. I always use this reference for Revan http://theflagshipeclipse.com/gallery/a ... _views.jpg I dont want to sound conflictive but its abeautiful armor made by MWA and it was not cheap and if im ahcking and adding stuff i want it to be the right stuff thats why i asked

I purchased this buckles you think they are ok?

Thanks buddy Yes the under shirt will be replaced for a proper turtle neck and add a pipping to it . My GML told me to lower the ring a bit more. which i have done by extending the leather straps. not sure what you mean by my chest.. I have ordered some clips and will be replacing those he also said to add material like the one from the hood and add this under the chest plate to make the hood look more like a cowl. this is one thing that is very confusing in the 501st each GML ha sits own standars. so its very hard to please everyone some revans get approved without any modification at all

Hi Guys I'm looking to submit my revan costume to the UKG for 501st approval could you help me out pointing issues that might make my costume not 501st approvable thank you More image sin my personal website thanks http://alanmolina.co.uk/costumes/revan