[Help Gloves Darth Bane Orbalisk Costume]

Hello and thanks for the reply! In fact similar to those of the pilot tie I had found this on Amazon:

https://www.amazon.it/Costume-medievale-rinascimentale-swordsman-sfoderata/dp/B07J2SZ9TX?ref_=v_sp_product_dpx&th=1

 

But I should know with greater certainty the actual length of the gloves, avoiding spending a considerable amount of money to have unusable gloves. If anyone can also advise me of links to products that may be suitable, I would thank you infinitely!

[Help Gloves Darth Bane Orbalisk Costume]

Hello everyone and sorry in advance for my bad English!

 

I'm recently trying to make the Darth Bane costume with the Orbalisk Armor looking for inspiration in the post and fantastic costume for The Clone Emperor. My doubt currently is about the glove version, which I reused from one of my Darth Nihilus costumes, but which looking in the photo seems too long and makes the Emperor ones look better. I show you two photos for reference:

 

 

 

So I wanted to know if you could recommend some gloves similar to the ones in the second photo since I can't find them! Basically they should be similar to those of Maul & Nihilus but not long enough to reach the elbow,so avoiding the ugly "funnel" visual effect.

Thank you very much for helping!

[3D File]

Hi😀, I tried to contact both Darth_harold and the seller of the 3d print set D03d, but no one ever replied 😭.... I was hoping to have an answer on which of the 3 choices could be good so I could start programming my costume, given the amount of work to do😞.

[3D File]

Hi and thanks for your reply😄!

Yes, I had seen the various trends, including that of Darth_Harold made in 3D. In fact, one of the links I posted I think is his (https://www.3d-props.com/3d-files/sith-eradicator-armor/ ). If this is yours, I wanted to buy it to start my costume, but before starting this adventure I would like some clarification😅

[3D File]

Hi!

Is there anyone who can help me and give me advice?

[3D File]

Hi everyone ! I'd like to ask for your help in starting my new Sith Acolyte costume! I don't know which of these 3 3D file types are better or used by some of you for your own costume for approval!

 

https://www.do3d.com/product-page/sith-acolyte-star-wars-body-armor-3d-model-project-2577

 

https://www.3d-props.com/3d-files/sith-eradicator-armor/

 

https://www.etsy.com/it/listing/673089604/sith-acolyte-jedi-knight-full-armor-file?click_key=f31ff5487d12750ad8fa909f41bfa826e92a3c07%3A673089604&click_sum=81c6013e&ref=hp_opfy-1

 

Thank you so much for your help and sorry for the bad english!

[Shirt Darth Revan]

Thank you very much! In the meantime I had already ordered and tried it! 😆

[Shirt Darth Revan]

Hi everyone! I

hope you can help me in my doubt about the Darth Revan shirt to complete my costume! From the CRL specifies only black with long sleeves, I wanted to know if these solutions I found would work:

 

https://www.amazon.it/Lower-East-Maglia-Uomo-Collo/dp/B01KJFZ0V4/ref=sr_1_9?__mk_it_IT=ÅMÅŽÕÑ&crid=3O74VV6K31QVA&keywords=maglia+dolcevita+maniche+lunghe+uomo&qid=1664653894&sprefix=maglia+doce+vita+maniche+lunghe+uom%2Caps%2C128&sr=8-9

or

https://www.terranovastyle.com/it_it/t-shirt-dolcevita-a-tinta-unita-sab0051319001s105-kw-t-shirt-ml-kw-nero/?utm_source=google&utm_medium=cpc&utm_campaign=IT_Shopping_Brand_2022_TRNBRAND&gclid=Cj0KCQjwyt-ZBhCNARIsAKH1177EZQP3IG60lVwUvofCMgOdDedJ2LCMp06lPDMG4byNDhAqDxXWgLYaApH7EALw_wcB

 

Thank you so much for your help and sorry for my bad English!

[Darth Nihilus Boots]

On 7/19/2022 at 9:03 AM, Homura said:

 

 

On 7/20/2022 at 3:03 AM, jw6cpfb said:

These are what i have and they're great for the look for Nihilus. I just highly recommend putting upgraded insoles in them or your feet will hurt

 

Men's Tall Black Costume Boots (halloweencostumes.com)

 

 

Thanks a lot for the answer!

I contacted my 501st and they told me that if for you it is good for them too! So I ask you for a last help and confirm if the boots that I posted to you are ok  ,or choose those of @jw6cpfb  ,a thousand thanks! https://www.halloweencostumes.eu/men-s-tall-black-costume-boots.html

[Darth Nihilus Boots]

Perfect, then I'll try to ask my 501st if these boots I linked are good for them too.

Tell me If you have other proposals, thank you very much!

[Darth Nihilus Boots]

Thanks for the reply!

Yes, in some discussions I read that for Darth Revan the boots are preferable with square-toedbe , but from CRL is optional for level 2 certification.

For Nihilus I imagined that they could be fine being simple boots, but given the not exactly cheap price I hoped and I wish they would fit both!

[Darth Nihilus Boots]

Hello everyone, I am a Star Wars fan from Italy and I am finalizing my costume to ask for the approval of my 501st Italica Garrison. The costume I proposed, taken from WickedArmor, is fine; but I have a hard time finding the boots. Since I have almost finished the Darth Revan costume too, from the CRL and from the posts in the forum I understand that they are quite similar, so I wanted to ask you if these 2 options are fine for you, thank you very much!

I apologize for my bad English!

 

https://it.aliexpress.com/item/32893761673.html?spm=a2g0o.cart.0.0.5f0118fcOkKGTw&mp=1&gatewayAdapt=glo2ita

 

https://it.aliexpress.com/item/1005003748440383.html?spm=a2g0o.cart.0.0.5f0118fcOkKGTw&mp=1&gatewayAdapt=glo2ita

[Need Help for approved Mask]

Can someone help me?

[Need Help for approved Mask]

Hello and thanks for the reply.

On the Italian forum where I asked for advice they told me the exact opposite,neither is good!

Reading the various posts on forum, I seem to have understood that the most well made ones are those of wicked armor, or similar to these images that I attach(have not been able to put those of the user en-zozallow in his post

.

If I understand correctly, the important thing is that the mask has "prongs" that point down from the bottom of the mask that is the KOTOR I / II mask; And the two side nose sections, along with the undereyes ("V" section) and the center red strip that goes up from the bottom of the mask to the V must be present,right?.

[Need Help for approved Mask]

Hello everyone!

I am a new Italian forum member (sorry for my bad bad badEnglish), and I ask you for advice for the original approved mask of Darth Revan.

I ordered the mask on the internet,but  I have been asked the front and back photos of the original mask, so that he can choose  a suitable 3d model. Can you help me in my research? Thank you very much to everyone.

 

P.S. The online shop showed me these 2 models that I attach: So I wanted to know from you, since in any case the ultimate goal is the approval of the costume, which is the right version, thank you very much for everything