Visas Marr Cricut Pattern

[DarthValkyria]

Here is a Cricut pattern for the Visas gold parts. The maker said that the ends should overlap if done correctly.

 https://design.cricut.com/#/landing/project-detail/5e9dd20983c2550f14c28f7e

From the person who posted it,

 

"This is absolutely not required, but if you like to tip my artist friend who did the art for you, you may leave a small tip at brandiyorkart@gmail.com. She is out of work at this time so anything helps."

[Aranela]

Hello All! This is the Original Poster here.   Apparently Cricut Design spare does not allow others to make original art that was uploaded, so here is the SVG for you!

This was designed on a 1.23 inch to 1.5 inch scale, but you can adjust as needed.  The ends over lap cleanly if you are careful.  

 

https://drive.google.com/open?id=1jhmEIzY_GFgrkNId6QwBy_1GU8KkN5zA

I have so many friends who have done this costume, and I want to help any future costumers save on the grueling hand painting hours.

This is absolutely not required, but if you like to tip my artist friend who did the art for you, you may leave a small tip at brandiyorkart@gmail.com. She is out of work at this time so anything helps.