Jump to content
  • Announcement

    Welcome to the forums!

    If you are a newly-approved member, make sure you check out the New Member Checklist!

    If you are a Detachment member and can't see the member-only area, post here for access.

    -DV

Sith Acolyte Do3D stl files (Czech Garrison)


Darth_harold

Recommended Posts

I have 3D files from Do3D and I start with work on it....

 

In this link will be pics of my progress (Its google drive)....

https://drive.google.com/drive/folders/15XS5Ti-6qzuUWX3tDQMkxVw9yxVlrng_?usp=sharing

New post will be info upgrade of work and pics will be on drive....

 

I will join with this costume to Czech Garrison.... Have a nice day

  • Thanks 1
Link to comment
Share on other sites

Bottom chest part is pasted together and sealed.... not is rdy for surface filler and fine sanding.... there is a pic

https://drive.google.com/file/d/1lKDvxtNa_BAJHqY_UiUFiTNX-5bjA4EH/view?usp=sharing

there is pic of all chest plate: https://drive.google.com/file/d/1QkqsuKQddGVigltksfImlTnW1V88WlsD/view?usp=sharing

Link to comment
Share on other sites

I have a question? Is this aprovable? I this fitting okey?

What do you think its okey or not?

https://drive.google.com/file/d/1DWE7oEoI07CDp-m7-evwajk42CpniKYl/view?usp=sharing

https://drive.google.com/file/d/15kdbtRqEZCtIohBhXFoPsr4mb_FoM8W7/view?usp=sharing

https://drive.google.com/file/d/1uQqDwKSd5iDeGNBAJj6zqjrcUxv7cIlK/view?usp=sharing

 

Under armor will be black upper suit.... and bottom chest armor part will be assing by belt....

Link to comment
Share on other sites

On 2/15/2019 at 7:48 PM, First0rder said:

Fitting seams ok but can you provide a straight on closer picture of the chest and ab plate?  

one of you pics is a bit dark and too far away to see the details. thanks

 

Thanks for answer for fitting.... I work with these files.... and they are riped from game.... and cinematics http://do3d.com/product/3d-printable-model-sith-acolyte-star-wars-body-armor-print-file-format-stl/

PS: look on older pics... there are a good details to seen I think....

Link to comment
Share on other sites

On 2/15/2019 at 9:24 PM, Darth_harold said:

Thanks for answer for fitting.... I world with these files.... and this is 100% of files riped from game.... and movies http://do3d.com/product/3d-printable-model-sith-acolyte-star-wars-body-armor-print-file-format-stl/

Hey man.... Print time of all 3 chest parts took 170 hours of printing.... on my body ( I have 183cm and 105kg) Im not a small guy :-) and sticking, sanding, fitting and priming of all parts took about 10 hours.... now I print shoulders and work on biceps, elbow, finger cover and mby back armor in fusion 360...

 

and I found a problem in reference pictures.... you can find acolyte on first sw tor cinematics.... you cant find him on sw tor loadings screens in game... and you can find him in cinematics when imperium falls agains ethernal empire... and armors looks diferents in these pics.... 

there is link for pics what I found and Im little bit confused....  

pics 1: https://drive.google.com/file/d/1hnK5PC6_SEYypSmu8Gc9baSLwPs99NMX/view?usp=sharing

pics 2: https://drive.google.com/file/d/1vp4g1KK6xj3MYmVybKGkQKkGB_fAtdwk/view?usp=sharing

pics 3: https://drive.google.com/file/d/1VC4_l1wLwcn6Jr18G9Mro_JsbhnB2crC/view?usp=sharing

pics 4: https://drive.google.com/file/d/1TJIN61dLJxvKD1t5KEzROKRBLY4UkAlK/view?usp=sharing

pics 5: https://drive.google.com/file/d/1pwp-pOEKsrSATWv1FMLkFx6rXt7J_Ygr/view?usp=sharing

On first pics you seen imperial army with two acolyte and they have different chest armor on one pics....

on seccond is same problem like on first and one of acolytes have same strange double swords with rly short handles....

first two are wallpapers and loading screens from sw tor (their official screens)

third and four are from first cinematics and there are diferents from CRL.... in upper chest plates are no rivets.... and on CRL they are.... in reference pics are screens from this cinematics.....

fifth screen is from ethernal DLC cinematic.... when ethernal army defeat a imperials ones.... there are a rivets in armor and there is different bottom part of armor.... (there you can seen full mask with back part)

and different saber hilt then is in CRL....

 

Sorry for my english... but I hope you understand what I mean

 

it looks like the acolyte has different armor and hilt. As if the armor changed with the game (like stormtroopers in movies IV V VI (they have different armor differents)). I personally create armor according to the first cinematics. CRL is a combination of all the pics .... and I think its wrong .... For example ... rivets are only for the version of the ethernal thrones but ethernal thoners acolyte have different armor and hilt. It will come to me that the CRL armor is a redoubted Jedi knight from SWTOR and some details are only on jedi knight and they are not on acolyte....

what do you think about it:

Link to comment
Share on other sites

Link to comment
Share on other sites

It was fun to see some of your reference images and to examine the details.     Thank you for sharing them!  It inspires me to go back and watch the trailer videos again.

I agree that some of there are some differences in the details.  When the video game first came out, I believe this full body image from an interview done with Blur Studios (I haven’t seen the interview myself)  was used as an important reference as people started constructing armor. 

 

 

B669C7A1-2488-41A8-ABB9-919D46508454.jpeg

Edited by TK Keith
Detail added
Link to comment
Share on other sites

On 2/25/2019 at 12:34 AM, Darth_harold said:

I think the finger armor looks good.  

From your picture of the thumb armor it is hard to tell how long it is.  Do you think it’s long enough to match the reference images?

 

 

CFEDE3DF-8FA0-4303-B411-F6E61378A251.jpeg

590ABB02-4DFE-482A-A2F9-6C609DBFCE58.jpeg

Link to comment
Share on other sites

Link to comment
Share on other sites

Link to comment
Share on other sites

new prints :) and lest make some sending and filing :D 

Claws will be from Aluminium 1mm 

https://drive.google.com/file/d/11FHYcnCVhyikZvY4D1jsxKzP52AKsUb8/view?usp=sharing

 

Now on printer is Forearms armor helmet and boots....

Link to comment
Share on other sites

On 3/20/2019 at 9:51 AM, Darth_harold said:

Looking good! I like how the forearm and mask are coming along as well!

Edited by TK Keith
added detail
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...