Darth_harold

For all who want to make a Knight of Ren "Cardo" Here's a model of his blaster https://pinshape.com/items/58048-3d-printed-star-wars-blaster-pistol-knight-of-ren-cardo-for-cosplay

hey man.... if you will need some help with armor just write me.... my acolyte is full 3d printed (its took about 1000 hours with 0,2mm) I make my own acolyte sword.... Like under suit like https://www.partyon.cz/karnevalove-kostymy/kostym-cerna-figura/?variantId=8706&gclid=CjwKCAiAx_DwBRAfEiwA3vwZYqLrPXSpVJcxhC5siofkVn9aLwLLhMtRrAw5Gx5gmtItCvKebZS9UBoCuScQAvD_BwE without cape and use balaclava) my build :

My first trooping as a official 501st member (SL-22585).... Sith acolyte from Czech Republic on Viecc 2019 Unfortunately, I lost the blade of the sword along the way so the photos are without the lightsaber Vaders Angels Star Wars Rangers Sith Balboa vs Apollo Vader

Is there some one who aproving sith acolytes some DL or GML? I have a ask.... I'm in approval process with my costume and I have a problem. CRL doesn't look like reference pictures, but my GML tells me it was told that CRL is correct. Can someone show me the other reference pictures by which the CRL was made? Other than in The old republic cinematic... I can provide a picture here from detachment CRL references and 3 "from swtor cinematic same video as ref pics" owns according to which the neck seal was made. and according to which the CRL neck seal definitely does not match the references. In the first picture we see 5 stripes, stitches and one stitch down to the chest armor. These 5 strips can be proved by another picture in the other two pictures we can see one vertical stripe to the chest armor. and waves that do not match the latex but the fabric. Furthermore, in all the photos you can see the neckseal under the chin. only in the elongated shape and deformation is seen under the mask and the edge of neckseal. This is my neckseal which is created according to these references .... I would like to ask why it is not approvable when it matches the references and the material according to the references. This is a CRL neck seal that does not match the references I have listed here. Therefore, please complete the references under which the neck seal was made in CRL. Thank you for answer. As far as I know the case of bad CRL should be CRL adjusted according to references. I did a lot of research around the Sith acolyte, and I also dealt with armor differences in the videos, posters, and loading screens in the game.. Every part of my armor I have documented reference that appeared in the game SWTOR. That's why I'm asking you for help now. I don't want to add a costume that is referenced. something that doesn't match the reference.

I made it by my self.... Its made from same fabric like robe (only inside is somethink like foam.... I dont know how to say in english....) I get help from my friend who is a dressmaker. https://drive.google.com/file/d/1vWT84gQj05iQHsyeUyy4zFCOemk4P7nr/view?usp=sharing And thanks for positive words.... Its alway good to hear it

My sith acolyte costume is ready for approval in 501st legion I Hope you like it... Enjoy approval pics

Leather belt with backs, bucklet and canister..... Need finish weavthering and costume can go on aprove

I hade blade from different saber....

Sith acolyte saber by my self (no sound only led diodes) beatiful red shiny light

still waiting for a belt.... but some foto form "Festival Fantazie" in Czech Republic

few pic from maker faire in prague with friends

ts look like my model on fingers and thumb just flip the figners and thumb on 180 degree and and take water to about 80 - 90 degree and deform thumb around your bones to reach perfect fit.... Way of finger and thumb armor

Still waiting for bags on belt.... and working on saber (making it by my onw with copper body and 3D print around with red light....) blades is from polycarbon blade for fight.... elbow armor is printed but its not finish yet.... everythink else is done.... when I finish it all it can be send for aprove If someone will need help with 3D prints and how to work with they just write me here

first test fit on star wars day in prague.... https://drive.google.com/file/d/1ok_iulshGFJ0C0R5W4dmriIFusULduDE/view?usp=sharing still must do belt and few details...

soma painting base black https://drive.google.com/file/d/1U3cMw1tFORmGXNzebMsbHL0sHRVcSyqU/view?usp=sharing metal + mate varnish https://drive.google.com/file/d/1848BxkuTevZb_zgxfML_6ScDfXdhrW_Z/view?usp=sharing

new costume part.... next guard ref img: https://drive.google.com/file/d/12AtAEXRxAzaKrvuqqyfMxkUsZQHM6HCa/view?usp=sharing My neck guard img: https://drive.google.com/file/d/1jjQrt3qmq3zgRTlE20GzwHSDWFLCoUZ7/view?usp=sharing https://drive.google.com/file/d/1vWT84gQj05iQHsyeUyy4zFCOemk4P7nr/view?usp=sharing https://drive.google.com/file/d/1uBBgR0tEE9W6UmKVz3X1LQrPYXeVVUYU/view?usp=sharing

progress.... all armor parts are printed.... and sharped..... prepare to paint.... boot armor https://drive.google.com/file/d/1n7LY-RNp5QS0S9NrW47pThzedn1SlQ9o/view?usp=sharing shin https://drive.google.com/file/d/10yvB2qeMXpDYbaaGei9m0NSr2u7ve9cC/view?usp=sharing https://drive.google.com/file/d/1DpYuQMnizy6PML_7_qrmUogLpv0OjoZX/view?usp=sharing thigh https://drive.google.com/file/d/1Yo1uHDFhBeDV6jHSVrO1Kn586GvcENKH/view?usp=sharing https://drive.google.com/file/d/1WIe-jT_CfNqh8j1In6GMoc147MM-s5Tv/view?usp=sharing sharped all parts.... (mask is in mold now)... https://drive.google.com/file/d/1WIe-jT_CfNqh8j1In6GMoc147MM-s5Tv/view?usp=sharing lightsaber model prepared for print around a tube with electronic https://drive.google.com/file/d/1ddDLYfPVLAtLNFEPKwusru19YYTUyItg/view?usp=sharing https://drive.google.com/file/d/1DNWSR25UJmKH2l0Q8jT0CUfcleAxqh_Q/view?usp=sharing

new update of mask.... Im looking forward to like a kid on xmas https://drive.google.com/file/d/1QiHC7OTbYVxNImYf0vu0QPmvW5UsNn_r/view?usp=sharing https://drive.google.com/file/d/1S7kR2iGtd-IdLswTZYR9MBrp5O8JXsKP/view?usp=sharing https://drive.google.com/file/d/1dinF1VTepwom4vcYTLAlRMN9eUyvI-3q/view?usp=sharing https://drive.google.com/file/d/1rygr5jfbxT5wP-GnBZ43KnKQ-9XrYcR-/view?usp=sharing https://drive.google.com/file/d/1crxKuSLCoB7Fw3oaz91VgZFlKZO9-0Pw/view?usp=sharing

Hey man.... you make a mazing job on mynock den build..... and I found one mistake what you made..... on pauldrons.... you make a misstake and turn it by 180 degress.... you have bad orientation.... I hope you dont will be piss of on me.... and it can be remake..... https://drive.google.com/file/d/1aLIk-Att2bWVgPr4Yt0U7npSC-y6BABd/view?usp=sharing there is a mynock foto and you can seen right orientation Have a nice day

Front bottom parts od printer.... Its look like starwars hannibal version https://drive.google.com/file/d/1YzBcsL4Z49Y0P0aw35pkXsXRYiOofN1y/view?usp=drivesdk https://drive.google.com/file/d/1CwR4X93p9q29VMyhiEyImiSpxZ9pQA98/view?usp=drivesdk And bracer is printed too https://drive.google.com/file/d/1OnT12O1b32fzyzqfHSTeEIU7rYKkOyWe/view?usp=drivesdk

claws are ready https://drive.google.com/file/d/1vPXP9PxQwiMUKAUQfwZGNQ0y0Ijese_Z/view?usp=sharing

new prints and lest make some sending and filing Claws will be from Aluminium 1mm https://drive.google.com/file/d/11FHYcnCVhyikZvY4D1jsxKzP52AKsUb8/view?usp=sharing Now on printer is Forearms armor helmet and boots....