Leaderboard

Just a quick update on what's going on with the detachment stuff since it's been a quiet period (not always a bad thing!). 1. We're actively designing merch for a racing shirt, patch, and coin themed for KOTOR 20th based on votes. These will come in the next few months. It is slow due to lack of artists available and, well, life. 2. We're working on 3 New to the Legion CRLs/costumes currently that we're hoping to be released before the end of the term in Feb after updates to the costumes are finished. 3. We were told by LMOs that we had to wait until the end of the season of Ahsoka before submitting requests for assignment of the costumes. But, after the short, "please don't spoil the episode for us" request time, we're submitting for Shin, Baylan, Morgan, Marrok, and all 3 Great Mothers to be assigned to TFE. 4. We're still looking for artists and a new Programs Officer if you're interested/able to assist the Detachment! If you have any other requests or ideas, please feel free to comment or message me!

It's finally here! Galactic Armory's V2 mask. Much more detailed and accurate than the old version. I figure I can fit red LEDs into the eye sockets to emulate the eyes.

Just as a head's up to anyone interested in doing this costume: It has been agreed that so long as the visible parts of this costume match the references available, I am good with allowing the missing parts to be supplemented from Eleena Daaru's references. With that, I look forward to seeing a high quality submission soon!

New guy here! I've been working on a spinning GI saber for a bit and it's starting to come along. I have a youtube channel documenting the build but I also wanted a build log for better documentation and thought 'what better place then with people who can give me some sound guidance.' So here I am! Looking forward to chatting with you grand folks. I'm pretty far along in the project, so I'll be updating this log until it catches up with progress.

Try everything on Boots & gloves are from Crowprops And now I'm searching for armors

Hi folks, I just wanted to share some of the pics I took during my shooting at the Georges Henri park in Brussels

Hello from Japan. I'm working on Darth Margas. Thank you for your opinion. Sent from my iPhone using Tapatalk

Korbanth has a Savage hilt for sale: https://korbanth.com/empty-double-sided-staff-the-oppressor

So close to being done. I need to redo the arm guards and chest armor and shorten the bottom corset pieces.

Hello everyone, I’m Daisy from the Dutch Garrison and together with Rikki I have been assigned as your LMO team for this term. About Me: My name is Daisy van Rijn, and this is my second term as a 501st Legion Membership Officer. I have eight approved 501st costumes, four in the Rebel Legion and I have a Seventh Sister costume that I'm hoping to finish this year. I have been sewing since I was 19 and love sharing that acquired knowledge with others. I'm excited to be able to assist you this year with the TFE Detachment as I have a large love for the Old Republic Era. What is an LMO? The Legion Membership Team is responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officers drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with member’s costumes. Have a question about membership these are the folks to talk to! There are LMOs you can contact at any time at Legion Officers however Rikki and I are the ones who are assigned to the Imperial Gunnery Corps this term. Thinking of starting a NTTL (New to the Legion) Costume? Please message the Detachment and me here as well as send a link to your build thread. I love researching new costumes and helping. Worried a costume may or may not be eligible for the Legion approval? https://databank.501st.com/databank/Costuming:CRLGuide See Character Approval and New to the Legion Costumes (NTTL) sections for details. For “New to the Legion” costumes please also have a look here: Costuming Standards Have a question? Do not hesitate to message me. Get your references together and sent to LMO (at) 501st (dot) com.

Today was play with makeup... I didn't get around to doing the back of the head tattoos. I do plan on making a stencil for that part. This took around 2 1/2hrs. Still learning the best way to work with the materials. I think I did a pretty good job.

I found this on StarWars.com if it helps.

Galactic Armory has updated and revised their Inquisitor mask, and I'm helping them attempt to model the hard parts on the belt. Thankfully the Inquisitor wears the typical jackboots, so that'll probably be the easiest part of the build.

Separate post: The mask from Galactic Armory arrived. It looks pretty spot on, we'll see how it holds up when the show comes out. As well, GA agreed to help me research the costume after the show airs and will help me develop any armor pieces or hard parts I may need.

So have been staring like a crazy person at the pictures I have again and think that the rubber at the center front of her costume and on the gauntlets is a rubber window seal. I'm buying a few typs of S and V shapes to do some experiments with that as well. All of my printing supplies have finally come in. I hadn't planned to do it all myself, but paying to have the screens made wasn't cheap and I screwed up the scale of one of the patterns, so I decided to just bite the bullet and buy what I need. I purchased blank screens with the proper thread count for dense prints and but 2 types of emulsion to try. Both are made for high density printing. I found a supplier online that prints the film negative of the pattern for pretty cheap ($10 for my small one and $25 for the larger plus shipping). They arrived in a few days. My next step is to make my first attempt at high density screen today. I'll take pictures and share links and things later. I'm going to start with the glove pattern first since it's small volume. I've also got the pattern for the bodysuit, so I will be adapting that for what I need so I can pattern out the parts for printing. Going to be a lot more activity over the next few months! A friend of mine that loves doing leather work is helping me iwth the armor and she has one of my boots to pattern out the new shaft. I did some initial tests for aging the boot vamp and those worked pretty well. When I get the leather parts back, I'll share images and how I did things for that too.

Big Update: My mask came in and it is gorgeous! I also have the armor finally smooth and ready to paint in a satin black. The soft parts are being worked on now, pleats for the sleeves were just finished recently and were a nightmare to do, the Kylo Ren costumers were right on how bad those were to sew lol.

So excited about this! Going to buy this gorgeous lightsaber from Shadowfoil props when they are ready for order.

I was so excited that I rushed to get all the changes made lol. Here is an updated photo.

Dropping these in here in case you haven’t seen them! Moses Ingram posted some BTS on her Instagram stories today including some shots that show how the costume layers. Hope they help!

All the armor is in the painting phase now and assembling the weapons now. No pictures I wish to share yet except maybe this:

Since I have been asked several times for different characters in GoH, both older and newly released, I'll make one post to hopefully help clear it up! 1. Yes, the current TFE Command and assigned LMOs for TFE support adding GoH versions of characters as eligible for TFE approval/new CRLs, SO LONG as there is a full 360 degrees of reference to show all the details. The view option in game makes that pretty much a non-issue, but we still need the highest resolution possible. 2. If the character in question already has an approved version in TFE, then a couple things can happen: a) If there are no differences between the approved version and the GoH version, then no new CRL is made and it is considered the same as the existing approval for said character. b) If there are differences between the approved version and the GoH version, then a new CRL can be made. In this case, it is considered a New to the Legion Work in Progress (NTTL WIP) and requires an entirely different approval process that includes the TFE Command Costume Staff and the TFE LMO directly. In this case (and any not already approved character, regardless of media source), it is recommended to contact the DL and LMOs directly so that the process can be set up and advisement can be given. In this case, you can contact the LMOs at LMO@501st.com and they will redirect to the proper folks, or email me directly at Nina501st@gmail.com and I can pull in our specific LMOs.

Please move this to the forum that you think is most appropriate if this is not the right one. What is an LMO? The Legion Membership Team are responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officer drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with members costumes. Have a question about membership these are the folks to talk to! LMO@501st.com *Thinking of starting a NTTL (New to the Legion) Costume? Please make sure you keep in contact with the Detachment. *For “New to the Legion” costumes please have a look here: http://databank.501st.com/databank/Costuming:CRLGuide Here is a brief list of some of the improvements we have planned for this term: • Communication, Clarity and Consistency: Utilizing the legion forum to regularly engage the membership and command staff alike through open and transparent lines of communication. (Ongoing) • Increase engagement with Detachment Leaders: Regular group meetings and conference calls to work with each other as a team. (Q1) • Launching “CRL Development Guide”: (Q1) • Streamline and document the process of creating and changing CRLs: (Q1) • Update the LMO Survival Guide: This will help current and future LMO understand the role and it’s responsibilities. (Q1) • CRL attainability: Ensuring CRLs and costumes attainable for all people in all countries and walks of life. (Ongoing) * Finishing 75% of unfinished CRLs: Supporting the detachments to find models and writing text for CRLs that are not yet green. (Q3) • Add galleries to every CRL: Increasing the use of detailed reference imagery in CRLs (Q3) • Create CRL Development Forums: Utilizing the legion forums for open and transparent development of new the legion CRLs.. (Q3) • Encouraging GML Feedback: Engaging the GMLs to ensure they know the LMO team is here to support them. Make formal efforts to receive feedback from GMLs about CRLs and the approval process. (Ongoing) • Regular Membership Surveys: We want to know what the members want. We serve the membership. (Ongoing) About Me My name is Dawn Bright and I am the LMO for the 501st Legion, ALMO with the Rebel Legion, I have previously served as XO of the Flagship Eclipse (501st) and the Senatorial Detachment (RL), GML of Southern California Garrison and a Legion Costume Judge (LCJ) for the Rebel Legion. I love making costumes (with an emphasis on EU and new to the legion), I have almost 60 (RL/501) Legion approved costumes. In my normal day to day life I am an Administrator of a care home for developmentally delayed adults in independent and inclusive living situations in sunny Southern California. I work with family's and social workers to establish communication between what the families and residents want for themselves to feel productive and able and I institute success for people in need. I'm a people person and as an LMO I put members first and foremost. People like you with passion for the costumes in this Detachment. We are all volunteers who have spent hundreds of dollars or/and hundreds of hours making costumes. I promise you that you will be treated with respect and deserve honest and efficient results. I look forward to serving you and working with this fine Detachment About the Team Michael Capell CT/SL/ID-3037 Timberline Garrison Michael has been an LMO and on the LMO Team for about a decade. He has done many things in the Legion since his wife told him she was joining and that he needed to as well. He has been the SLD Webmaster for ten years, as well as (over the years) been a GXO, GML, GWL, and GEC. He specializes in Clones, EU / Legends, Sith Lord costumes, and helping people where he can. He’s looking forward to another term helping expand our Costume Reference Library. Blair Douglas ID-12266 Midwest Garrison Blair is new to the LMO team but has served as a liaison for unity for the clubs for many years. She has LMO experience with the Rebel Legion and has led an effort in the RL around costume approval reform with a concentration on maintaining quality, improving consistency, and making approvals attainable. Her experience will help us address some of the current pain points within the 501st system. An additional bonus is that Blair is a lead software engineer by day helping to provide Fortune 500 companies technical solutions for their business needs. Her professional experience will also help us assess the current state of the systems supporting costume approvals and help to figure out how to improve them to facilitate a more positive costume approval experience. Fun fact Blair plays bass in the band Soft Speaker, extra fun fact she paid her way through college playing bass in a U2 tribute band and her nickname was Madame Clayton. Kris Kobus ID-33633 United Kingdom Garrison Kris is new to LMO but has held positions such as XO and DCA for the IOC and Events administrator for his Garrison where he is also a Officer costume adviser. Kris is a workaholic and does not believe in sleep so is usually always available no matter the time zone. Brian Anderson TK-7602 New England Garrison Brian has been the LMO team lead previously. He was one of the driving forces of Detachment empowerment and pushed for CRL changes. Brian has been on local staff and Detachment level staff for many years and brings a wealth of knowledge and experience to the table. Brian is known as the “make it look like the picture!” guy when it comes to standards and truly embraces current Legion culture. Eric Brager TK-9674 New England Garrison Eric was the lead LMO for the 501st Legion two terms from 2015 to 2017. He has twice been elected FISD Detachment Leader and has held a number of garrison level command positions in the 501st Legion We are so very excited to work with you guys! One thing I love so much about Detachments is the love for new CRLs and the passion. Both of which are very near and dear to my heart. Please do not hesitate to reach out to the Detachment or LMO team. I prefer messages Here or to LMO@501st.com that way I keep record of them and can tag appropriate parties Thank you and have a nice day, Dawn Bright SL-13377 www.SL13377.com https://www.501st.com/members/displaymember.php?userID=15902&costumeID=343

Here's the thing: these are animated characters. There isn't just one right answer because these are like art; the reference can support a handful of interpretations. The armor color is mottled, and is not just one color. I'll give an example of my favorite boots. These are black underneath, and the wax polish on top marked them look anything from grey to dark brown, but I know for a fact that the leather is black because I'm the one who put the polish on. It is the weathering that dictates how people interpret it, but these are what they looked like when I bought them: This is a real world translation of what the armor looks like in the cartoon. Now to the CRL. It is an animated cartoon, and just like 99% of the rest of our CRLs in TFE, the colors change as much as the number of times the character is seen. There is an accepted level of colors on a gradient that could be argued for the character's armor, but that does not make the CRL wrong. We only make CRLs for, "variants" that are approved, otherwise we'd have a 48 page long CRL for Aphra, alone, with all the Barbie dress up versions she has in the comics. So the correct statement isn't, "how can we make it not inaccurate?", but, "do I have the references to validate my interpretation for approval, which can then be ADDED to the existing CRL that already has done so?". The answer to that lies with the Detachment Leader, LMO, and your GML on how well you replicate the references to the real world.

Making them turned out to be very easy for me. I used foam and Worbla. It was the first thing I made with Worbla, so even if you’ve never tried it before you might find it easy enough. You can read my blog about it here if it helps- http://withoutastitchon.blogspot.com/2016/04/mara-jade-knees-and-shin-guards.html?m=1

Some of my favorites I've gotten as Darth Nihilus: Darth Maul (no real shock there) Thor (no clue how the kid came up with that one) Mulan (dad was possibly drunk, or raciest, or both...) And today I heard this story from one of my local troopers talking to a little girl dressed as a stormtrooper - "Well, I'm going to go over there and talk to Darth Vader with the skeleton face ...bye!"

Hi everyone! My name is Jason and I'm with the Star Garrison, and representing the West Texas Squad. My first approved costume was my Pre-armor Darth Vader, which was a costume I honestly wanted back when RotS came out, long before I knew about the 501st. I recently got my Darth Revan approved and I'm happy about that. I've only trooped in it once, and that was when my squad decided to take a short break after the rush surrounding The Last Jedi. Next up, I'm working on Kylo Ren, specifically both his TFA CRLs. Maybe later on in the year I can go for the new TLJ CRLs.

Hi there! DS-32946 reporting in! I'm Jessica from the 70th Explorers Garrison (Firehawk Squad). I joined the 501st in May 2016 with my ROTJ Royal Guard. My Seventh Sister is my second costume and I am working on a Biker Scout for my third. Since joining back in 2016, I've been a trooping fool ever since. To date, I have done 84 troops in my Royal Guard and just did my first troop in my Seventh Sister today!

Forwarding this to the LMO so she can see it!

Racing shirt is in the works!

There is no embargo on making a costume - if you can provide the reference pictures of the costume from all sides incl. details and such, it should be good to go. You can also message our DL @DarthValkyria and ask on how to

I’m skipping way ahead. I got a little hyper focused and just didn’t follow up with documentation. I have been taking pictures as I go. I have a photoshoot next Sunday and had to step up my game. Finished the bodysuit (sort of) and took some pics. The cape clips on to my shoulders. still to do: Place Velcro to hold armor in key locations Belt - cut to length, finish painting greeblies, wire LED Armor - apply Velcro, repattern collar, model greeblie for guantlets Boots - A friend is working on them for me cape - hem and shorten clip straps saber - all the things

After researching for a long time I've come to the conclusion that there is not enough references of Darth Zannah for an official Legion costume. So I figured I'd make my own design. A bit simplified so I can make it pretty quick and on a budget, since I'm saving up for a hand tailored imperial uniform for Governor Pryce. When I got the wig I took some silly pictures, so don't mind those, they are of course not of the finished look. I still need to make the hood and wait for the actual lightsabers to arrive. I will cut the wig a bit shorter and of course do the makeup correctly next time. What do you guys think of my design idea? I really just wanted to share my progress.

Thanks! Finished now!

So, I just started writing out a potential CRL today. My understanding is that the 501st won't be making this a regular CRL but could make it a Legion Level Approval costume. I have been in contact at the Legion level and was instructed to provide a serviceable CRL first.

My costume was approved today! Yay! DS Mara Jade set complete!

Did a lot of pattern work today. Mostly on the bodysuit, but I also did some work on the screen prints for the bodysuit (ordered a mirror of the one I already have so I don’t have to laser cut it.) I’ll try and explain what I did a bit. The bodysuit pattern is actually not bad. The sizing is true to what the packaging claims. The only thing I don’t like about it is the weird roundness at the hips. It’s not a natural curve and I had to edit out. I still highly recommend it. this is the pattern I’m using and a link https://www.etsy.com/listing/719618406/catsuit-with-long-sleeve-and-front?ref=yr_purchases I used a curve to adjust the side seam line and I was much happier with the fit. After I did a mock-up I had to cut the pattern into parts. There are 4 panels to the legs but I cut it again at the calf. The reason for this is because my screen size is only 17” x 24”. Doesn’t cover the entire leg and would look terrible pieced together. Since the pleated legging will cover that, I’m not worried about it. More to come on the legging bit. Both the internal and external seams can be seen clearly in the 2 images above. it was tough to get a good image since the pattern pieces are so large. I split both the front and back pattern in half. Then I measured up from my ankle to determine we’re to cut at the calf. I marked which parts will be printed fabric and then cut them all apart. I removed the seam allowance too. I don’t really need a 1/2” allowance and I’ll be serging and trimming the seams down anyway. I prefer to add allowances to the fabric with chalk after I’ve traced the pattern pieces on. The above image shows the vinyl screen I laser cut. It was good to see how things would line up. if you plan to make this costume keep in mind you’ll need 3 screens. One for the gloves and 2 for the bodysuit since there is a left and right slant to the pattern. After I finished this part of the bodysuit I tackled the leggings. Not sure what else to call them. Originally I thought it was all part of the bodysuit but I don’t think that’s the case now. After closer inspection there are a few things that stand out: 1. The stitched gathers at the back of the knee were to tighten the fit, but that wouldn’t be necessary if it was all one bodysuit 2. There is gathered fabric above the pleats which indicates a difference in fabric volume between the legging and bodysuit leg or at least enough pressure from the legging to squeeze the fabric underneath. 3. the calf side of the legging is really lumpy and looks like it’s layered over something else. 4. it is much much easier to make it as a separate part and slip it on. With all this in mind I patterned out a separate part for the leggings. I kind of eyeballed the length needed and made sure I had 6 pleats. I plan to use a doubled layer of fabric that will fold down from the top. That and the pleats themselves should give enough volume but I’ll find out tomorrow. I still have some pattern work to do for the torso and I need to model and mold the greeblies since I couldn’t find practical solution. I also need to patted the gloves. While perusing Etsy, I found a vendor selling patterns for this costume. It consists of the armor, belt, greeblies, and boot covers. So far I don’t have complaints. The sizing seems to be okay, but I’ll need to mock up some of the parts to be sure. I won’t be using the belt as I don’t agree that it’s something other than a straight black belt blank with embellishment. Everything I’ve found so far has odd shaping, but unless you have a hip tilt to accommodate the curve it’s not a good pattern option. I have a belt blank on order and will talk more about it when I have the parts printed. Here is where I got the patterns for the armor: https://www.etsy.com/listing/1255438991/third-sister-inquisitor-reva-costume?ref=yr_purchases

Ok, full suit up day! Still have lots of finishing touches and I'm just using a pair of underarmor running gloves until I finish the gloves, but this is all the pieces. Double cloaks, bracers, belts, etc. Also did a walking test outside and the double cloaks look awesome when walking. Link to other pics.

Was able to do a small swatch test with the glove pattern and I’m much happier with it.

Had a productive day today. But I’m going to share a little of the drama. Originally I had a screen shop make 2 screens for me. It was expensive. Unfortunately one of the patterns was sized wrong. Since the screens were expensive I decided to make one myself. Cut sad music. Making a high density screen with emulsion is not done often for a reason. It takes a lot of skill. Usually a capillary film is used, but I just couldn’t justify the cost. The cheapest I found in a good size was over $100US. No thank you. Luckily I have some knowledgeable people at work. I finally have a screen I can burn (it’s drying as I type this) The screen that was the right size wasn’t very thick so I wasn’t sure what the result would be. Unfortunately the fabric I’m using shrinks significantly under the high heat used to cure the ink which made multiple passes impossible, but I’m happy with the result. The color in the images is washed out a bit. The ink is actually grey. Now I will get my pattern sorted and I’ll do the final prints.

Great find by @Trachta! Custom belt for Reva on Etsy. I’ll need to customize it a bit to make it more accurate, but it’s one less thing to build myself. :) https://www.etsy.com/listing/1265073920/third-sister-belt-reva?click_key=53f5f3b76d0ba3cedeaf7830e93173ef209efb8d%3A1265073920&click_sum=3cff8fd3&ref=shop_home_active_29&sts=1

I was just looking into this too. Great minds think alike.

Not saying these would or wouldn't pass basic... But shirt should have 15 vertical ribs, not 26. Colors overall look pretty spot on to me. The fly should be a rectangular panel and not just a regular fly. Could be an easy change to just sew a rectangle of fabric over that area. Once you have boots just be sure the pants are long enough because they look disproportionally short in the pics. For the armor JMS and Tristone props on etsy are the only creators I know of for this armor. If you have a garrison mate with a printer that's the way I did it because I don't have a printer either. Magmel creations on etsy for the belt is an option.

Where did you source the jersey? That looks promising.

Waiting on dem comments and oppinions like...

The CRL is not needed for first approval. It will be wrote as the first person puts in a costume to be judged. My write up is information that has been gathered from the Second Sisters Build Group on facebook (which has really great hi-res images to help you). To submit you will need to gather your references. A 360 of the character is recommended as well as close ups of details. The level of available reference material is amazing, so they'll probably be looking for something as accurate as can be translated from a 3D game character. Once you have the outfit built, take the appropriate photos for submissions. The Flagship Eclipse is the detachment and you can find further instruction on submission and contacting your unit here: https://databank.501st.com/databank/Join_Us

Definitely aiming to have 2 versions in the hood with the shoulder and boot addition, then the normal version.

If its a Black Costume, Darth Vader is the number one mistaken name used. In my Starkiller hoth, I don't get names, I get questions "Who the hell are you?" In my Jawa, I get called a Tusken Raider. In my Malakili, again no names, just the reply that "that is probably the most comfortable costume in all of Star Wars". When outside in the hot sun, "That is the Smartest Costume"! Not trooped in my Garindan yet, but I will find out next week what comments I get in that costume.

Hi everyone! I'm prospective member of Ukraine Outpost and I'm going to do Mother Talzin costume for approve me as 501st member. So I decided to create this topic to show my work step by step. There is no clear CRL yet for this character, so I'll better to show all process and correct possible mistakes during processing, it's much easier than remaking of finished costume. Also I hope that my research will be usefull to next people who will do this character. So firstly what exactly parts does it consist of. I analyzed Talzin's stuff and see there the next items: 1) Top with long sleeves. Red with pattern sleeves decorated with reddish brown stripe, other part is plain red. 2) Leggings. Red fabric with the main pattern. 3) Neck piece. It's rather collar of the top, but as my sewing experience shows, it's much easier to do it as a separate piece. Plain red, has thick bubbled ruffles. 4) Bodice. Reddish brown as sleeves decoration and the same matherial. V-shape neckline to the collarbone. I was thinking a lot about quantity of the stripes. There are only 6 visible, but seam lines on the bust part points that there are another pair covered with skirt. 5) Shoulder pieces. The same patterned fabric as on sleeves and leggings. The length of single piece is easy to determine according to arm length. It should be from shoulder to wrist. 6) Skirt. Made of red matherial similar to the backing color of sleeves/leggings/shoulders but with large dark red pattern. Underlayed with some tight matherial to keep shape. Consist of three pieces. Side pieces are 1/2 wide of the middle back piece on the hem line. The length could be determined according to leg length. In the original it's about 2/3 of hip to floor. 7) Criss-cross scarf (tabards?). Made of the same fabric as sleeves/leggings/shoulders. The left piece cross over the right one both at front and back. 8 ) Pleated sash with belt and decorative stripes. The sash itself fitted to body shape. It's made of plain red matherial and has 4 pleats over waist line and 3 under waist line. Brown belt is made of leather-like matherial few tone lighter that bodice and sleeves decorations. Two decorative stripes on the front (floor long, the same matherial as sleeves/leggings) and two short on the back (the same color and matherial as belt) 9) Back "wings" 10) Headpiece 11) Boots 12) Makeup About the fabrics. I did pattern based on the screenshots and printed it on a fabrics (polyester for most pieces and matte spandex for leggings). I also added weathered texture which also visible on the original fabric. Skirt pattern is in progress yet, but I will print it also on polyester. For the bodice I purghased reddish brown faux leather. And here are the fabrics itself. It's both looks allmost identical, spandex just a bit softer. (I need shoot it outdoor in daylight, indoor light "eats" the colors) And the bodice pattern unassembled/assembled on a dressform. About the back shape - I did it repeating the "wings" piece. That's I have at the moment. I will add new materials as I work on the costume. PS: my English is far from ideal, but I keep practice and I'll be really appreciated if you'll notice me about possible mistakes. PPS: and thanks to @romero4444 from this thread. He collected really great references base.

Hello there, SL-81011 from the 70th Explorers Garrison. I received my approval email, welcoming me to the 501st on the 4th of July. That made celebrating the 4th even better. I have done 2 troops as Darth Revan so far and have 2 more this coming Saturday. My costume is from Wicked Armor, and after reviewing theses forums, I plan on making many modifications.