Jump to content
  • Announcement

    Welcome to the forums!

    If you are a newly-approved member, make sure you check out the New Member Checklist!

    If you are a Detachment member and can't see the member-only area, post here for access.

    -DV

Leaderboard

Popular Content

Showing content with the highest reputation since 03/30/2015 in Posts

  1. Just a quick update on what's going on with the detachment stuff since it's been a quiet period (not always a bad thing!). 1. We're actively designing merch for a racing shirt, patch, and coin themed for KOTOR 20th based on votes. These will come in the next few months. It is slow due to lack of artists available and, well, life. 2. We're working on 3 New to the Legion CRLs/costumes currently that we're hoping to be released before the end of the term in Feb after updates to the costumes are finished. 3. We were told by LMOs that we had to wait until the end of the season of Ahsoka before submitting requests for assignment of the costumes. But, after the short, "please don't spoil the episode for us" request time, we're submitting for Shin, Baylan, Morgan, Marrok, and all 3 Great Mothers to be assigned to TFE. 4. We're still looking for artists and a new Programs Officer if you're interested/able to assist the Detachment! If you have any other requests or ideas, please feel free to comment or message me!
    5 points
  2. It's finally here! Galactic Armory's V2 mask. Much more detailed and accurate than the old version. I figure I can fit red LEDs into the eye sockets to emulate the eyes.
    4 points
  3. Just as a head's up to anyone interested in doing this costume: It has been agreed that so long as the visible parts of this costume match the references available, I am good with allowing the missing parts to be supplemented from Eleena Daaru's references. With that, I look forward to seeing a high quality submission soon!
    4 points
  4. New guy here! I've been working on a spinning GI saber for a bit and it's starting to come along. I have a youtube channel documenting the build but I also wanted a build log for better documentation and thought 'what better place then with people who can give me some sound guidance.' So here I am! Looking forward to chatting with you grand folks. I'm pretty far along in the project, so I'll be updating this log until it catches up with progress.
    4 points
  5. Try everything on Boots & gloves are from Crowprops And now I'm searching for armors
    4 points
  6. Hi folks, I just wanted to share some of the pics I took during my shooting at the Georges Henri park in Brussels
    3 points
  7. Hello from Japan. I'm working on Darth Margas. Thank you for your opinion. Sent from my iPhone using Tapatalk
    3 points
  8. Korbanth has a Savage hilt for sale: https://korbanth.com/empty-double-sided-staff-the-oppressor
    3 points
  9. So close to being done. I need to redo the arm guards and chest armor and shorten the bottom corset pieces.
    3 points
  10. Hello everyone, I’m Daisy from the Dutch Garrison and together with Rikki I have been assigned as your LMO team for this term. About Me: My name is Daisy van Rijn, and this is my second term as a 501st Legion Membership Officer. I have eight approved 501st costumes, four in the Rebel Legion and I have a Seventh Sister costume that I'm hoping to finish this year. I have been sewing since I was 19 and love sharing that acquired knowledge with others. I'm excited to be able to assist you this year with the TFE Detachment as I have a large love for the Old Republic Era. What is an LMO? The Legion Membership Team is responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officers drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with member’s costumes. Have a question about membership these are the folks to talk to! There are LMOs you can contact at any time at Legion Officers however Rikki and I are the ones who are assigned to the Imperial Gunnery Corps this term. Thinking of starting a NTTL (New to the Legion) Costume? Please message the Detachment and me here as well as send a link to your build thread. I love researching new costumes and helping. Worried a costume may or may not be eligible for the Legion approval? https://databank.501st.com/databank/Costuming:CRLGuide See Character Approval and New to the Legion Costumes (NTTL) sections for details. For “New to the Legion” costumes please also have a look here: Costuming Standards Have a question? Do not hesitate to message me. Get your references together and sent to LMO (at) 501st (dot) com.
    3 points
  11. Today was play with makeup... I didn't get around to doing the back of the head tattoos. I do plan on making a stencil for that part. This took around 2 1/2hrs. Still learning the best way to work with the materials. I think I did a pretty good job.
    3 points
  12. I found this on StarWars.com if it helps.
    3 points
  13. Galactic Armory has updated and revised their Inquisitor mask, and I'm helping them attempt to model the hard parts on the belt. Thankfully the Inquisitor wears the typical jackboots, so that'll probably be the easiest part of the build.
    3 points
  14. Separate post: The mask from Galactic Armory arrived. It looks pretty spot on, we'll see how it holds up when the show comes out. As well, GA agreed to help me research the costume after the show airs and will help me develop any armor pieces or hard parts I may need.
    3 points
  15. So have been staring like a crazy person at the pictures I have again and think that the rubber at the center front of her costume and on the gauntlets is a rubber window seal. I'm buying a few typs of S and V shapes to do some experiments with that as well. All of my printing supplies have finally come in. I hadn't planned to do it all myself, but paying to have the screens made wasn't cheap and I screwed up the scale of one of the patterns, so I decided to just bite the bullet and buy what I need. I purchased blank screens with the proper thread count for dense prints and but 2 types of emulsion to try. Both are made for high density printing. I found a supplier online that prints the film negative of the pattern for pretty cheap ($10 for my small one and $25 for the larger plus shipping). They arrived in a few days. My next step is to make my first attempt at high density screen today. I'll take pictures and share links and things later. I'm going to start with the glove pattern first since it's small volume. I've also got the pattern for the bodysuit, so I will be adapting that for what I need so I can pattern out the parts for printing. Going to be a lot more activity over the next few months! A friend of mine that loves doing leather work is helping me iwth the armor and she has one of my boots to pattern out the new shaft. I did some initial tests for aging the boot vamp and those worked pretty well. When I get the leather parts back, I'll share images and how I did things for that too.
    3 points
  16. Big Update: My mask came in and it is gorgeous! I also have the armor finally smooth and ready to paint in a satin black. The soft parts are being worked on now, pleats for the sleeves were just finished recently and were a nightmare to do, the Kylo Ren costumers were right on how bad those were to sew lol.
    3 points
  17. So excited about this! Going to buy this gorgeous lightsaber from Shadowfoil props when they are ready for order.
    3 points
  18. I was so excited that I rushed to get all the changes made lol. Here is an updated photo.
    3 points
  19. Dropping these in here in case you haven’t seen them! Moses Ingram posted some BTS on her Instagram stories today including some shots that show how the costume layers. Hope they help!
    3 points
  20. All the armor is in the painting phase now and assembling the weapons now. No pictures I wish to share yet except maybe this:
    3 points
  21. Since I have been asked several times for different characters in GoH, both older and newly released, I'll make one post to hopefully help clear it up! 1. Yes, the current TFE Command and assigned LMOs for TFE support adding GoH versions of characters as eligible for TFE approval/new CRLs, SO LONG as there is a full 360 degrees of reference to show all the details. The view option in game makes that pretty much a non-issue, but we still need the highest resolution possible. 2. If the character in question already has an approved version in TFE, then a couple things can happen: a) If there are no differences between the approved version and the GoH version, then no new CRL is made and it is considered the same as the existing approval for said character. b) If there are differences between the approved version and the GoH version, then a new CRL can be made. In this case, it is considered a New to the Legion Work in Progress (NTTL WIP) and requires an entirely different approval process that includes the TFE Command Costume Staff and the TFE LMO directly. In this case (and any not already approved character, regardless of media source), it is recommended to contact the DL and LMOs directly so that the process can be set up and advisement can be given. In this case, you can contact the LMOs at LMO@501st.com and they will redirect to the proper folks, or email me directly at Nina501st@gmail.com and I can pull in our specific LMOs.
    3 points
  22. Please move this to the forum that you think is most appropriate if this is not the right one. What is an LMO? The Legion Membership Team are responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officer drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with members costumes. Have a question about membership these are the folks to talk to! LMO@501st.com *Thinking of starting a NTTL (New to the Legion) Costume? Please make sure you keep in contact with the Detachment. *For “New to the Legion” costumes please have a look here: http://databank.501st.com/databank/Costuming:CRLGuide Here is a brief list of some of the improvements we have planned for this term: • Communication, Clarity and Consistency: Utilizing the legion forum to regularly engage the membership and command staff alike through open and transparent lines of communication. (Ongoing) • Increase engagement with Detachment Leaders: Regular group meetings and conference calls to work with each other as a team. (Q1) • Launching “CRL Development Guide”: (Q1) • Streamline and document the process of creating and changing CRLs: (Q1) • Update the LMO Survival Guide: This will help current and future LMO understand the role and it’s responsibilities. (Q1) • CRL attainability: Ensuring CRLs and costumes attainable for all people in all countries and walks of life. (Ongoing) * Finishing 75% of unfinished CRLs: Supporting the detachments to find models and writing text for CRLs that are not yet green. (Q3) • Add galleries to every CRL: Increasing the use of detailed reference imagery in CRLs (Q3) • Create CRL Development Forums: Utilizing the legion forums for open and transparent development of new the legion CRLs.. (Q3) • Encouraging GML Feedback: Engaging the GMLs to ensure they know the LMO team is here to support them. Make formal efforts to receive feedback from GMLs about CRLs and the approval process. (Ongoing) • Regular Membership Surveys: We want to know what the members want. We serve the membership. (Ongoing) About Me My name is Dawn Bright and I am the LMO for the 501st Legion, ALMO with the Rebel Legion, I have previously served as XO of the Flagship Eclipse (501st) and the Senatorial Detachment (RL), GML of Southern California Garrison and a Legion Costume Judge (LCJ) for the Rebel Legion. I love making costumes (with an emphasis on EU and new to the legion), I have almost 60 (RL/501) Legion approved costumes. In my normal day to day life I am an Administrator of a care home for developmentally delayed adults in independent and inclusive living situations in sunny Southern California. I work with family's and social workers to establish communication between what the families and residents want for themselves to feel productive and able and I institute success for people in need. I'm a people person and as an LMO I put members first and foremost. People like you with passion for the costumes in this Detachment. We are all volunteers who have spent hundreds of dollars or/and hundreds of hours making costumes. I promise you that you will be treated with respect and deserve honest and efficient results. I look forward to serving you and working with this fine Detachment About the Team Michael Capell CT/SL/ID-3037 Timberline Garrison Michael has been an LMO and on the LMO Team for about a decade. He has done many things in the Legion since his wife told him she was joining and that he needed to as well. He has been the SLD Webmaster for ten years, as well as (over the years) been a GXO, GML, GWL, and GEC. He specializes in Clones, EU / Legends, Sith Lord costumes, and helping people where he can. He’s looking forward to another term helping expand our Costume Reference Library. Blair Douglas ID-12266 Midwest Garrison Blair is new to the LMO team but has served as a liaison for unity for the clubs for many years. She has LMO experience with the Rebel Legion and has led an effort in the RL around costume approval reform with a concentration on maintaining quality, improving consistency, and making approvals attainable. Her experience will help us address some of the current pain points within the 501st system. An additional bonus is that Blair is a lead software engineer by day helping to provide Fortune 500 companies technical solutions for their business needs. Her professional experience will also help us assess the current state of the systems supporting costume approvals and help to figure out how to improve them to facilitate a more positive costume approval experience. Fun fact Blair plays bass in the band Soft Speaker, extra fun fact she paid her way through college playing bass in a U2 tribute band and her nickname was Madame Clayton. Kris Kobus ID-33633 United Kingdom Garrison Kris is new to LMO but has held positions such as XO and DCA for the IOC and Events administrator for his Garrison where he is also a Officer costume adviser. Kris is a workaholic and does not believe in sleep so is usually always available no matter the time zone. Brian Anderson TK-7602 New England Garrison Brian has been the LMO team lead previously. He was one of the driving forces of Detachment empowerment and pushed for CRL changes. Brian has been on local staff and Detachment level staff for many years and brings a wealth of knowledge and experience to the table. Brian is known as the “make it look like the picture!” guy when it comes to standards and truly embraces current Legion culture. Eric Brager TK-9674 New England Garrison Eric was the lead LMO for the 501st Legion two terms from 2015 to 2017. He has twice been elected FISD Detachment Leader and has held a number of garrison level command positions in the 501st Legion We are so very excited to work with you guys! One thing I love so much about Detachments is the love for new CRLs and the passion. Both of which are very near and dear to my heart. Please do not hesitate to reach out to the Detachment or LMO team. I prefer messages Here or to LMO@501st.com that way I keep record of them and can tag appropriate parties Thank you and have a nice day, Dawn Bright SL-13377 www.SL13377.com https://www.501st.com/members/displaymember.php?userID=15902&costumeID=343
    3 points
  23. Here's the thing: these are animated characters. There isn't just one right answer because these are like art; the reference can support a handful of interpretations. The armor color is mottled, and is not just one color. I'll give an example of my favorite boots. These are black underneath, and the wax polish on top marked them look anything from grey to dark brown, but I know for a fact that the leather is black because I'm the one who put the polish on. It is the weathering that dictates how people interpret it, but these are what they looked like when I bought them: This is a real world translation of what the armor looks like in the cartoon. Now to the CRL. It is an animated cartoon, and just like 99% of the rest of our CRLs in TFE, the colors change as much as the number of times the character is seen. There is an accepted level of colors on a gradient that could be argued for the character's armor, but that does not make the CRL wrong. We only make CRLs for, "variants" that are approved, otherwise we'd have a 48 page long CRL for Aphra, alone, with all the Barbie dress up versions she has in the comics. So the correct statement isn't, "how can we make it not inaccurate?", but, "do I have the references to validate my interpretation for approval, which can then be ADDED to the existing CRL that already has done so?". The answer to that lies with the Detachment Leader, LMO, and your GML on how well you replicate the references to the real world.
    3 points
  24. Making them turned out to be very easy for me. I used foam and Worbla. It was the first thing I made with Worbla, so even if you’ve never tried it before you might find it easy enough. You can read my blog about it here if it helps- http://withoutastitchon.blogspot.com/2016/04/mara-jade-knees-and-shin-guards.html?m=1
    3 points
  25. Some of my favorites I've gotten as Darth Nihilus: Darth Maul (no real shock there) Thor (no clue how the kid came up with that one) Mulan (dad was possibly drunk, or raciest, or both...) And today I heard this story from one of my local troopers talking to a little girl dressed as a stormtrooper - "Well, I'm going to go over there and talk to Darth Vader with the skeleton face ...bye!"
    3 points
  26. Hi everyone! My name is Jason and I'm with the Star Garrison, and representing the West Texas Squad. My first approved costume was my Pre-armor Darth Vader, which was a costume I honestly wanted back when RotS came out, long before I knew about the 501st. I recently got my Darth Revan approved and I'm happy about that. I've only trooped in it once, and that was when my squad decided to take a short break after the rush surrounding The Last Jedi. Next up, I'm working on Kylo Ren, specifically both his TFA CRLs. Maybe later on in the year I can go for the new TLJ CRLs.
    3 points
  27. Hi there! DS-32946 reporting in! I'm Jessica from the 70th Explorers Garrison (Firehawk Squad). I joined the 501st in May 2016 with my ROTJ Royal Guard. My Seventh Sister is my second costume and I am working on a Biker Scout for my third. Since joining back in 2016, I've been a trooping fool ever since. To date, I have done 84 troops in my Royal Guard and just did my first troop in my Seventh Sister today!
    3 points
  28. Forwarding this to the LMO so she can see it!
    3 points
  29. There is no embargo on making a costume - if you can provide the reference pictures of the costume from all sides incl. details and such, it should be good to go. You can also message our DL @DarthValkyria and ask on how to
    2 points
  30. Thanks LordZedel for clarification - verification. For mine - I use the Etsy neck seal combined with a vest with a v-neck shape to it. Similar look to the bottom pict you reference.
    2 points
  31. I will do a better write up of this in the next month or so. I will write more about how to make a casting of your head and such, but for now this is how to make the actual hard plastic re-usable stencil. Okay so this is going to be a bit of a long post. For my Ventress I have been planning trying to make a hard plastic stencil to use for airbrushing my Asajj Ventress tattoos on the scalp part of the head. I wanted something that is pretty much a continuous shape that doesn't have to have sections that need to be created every couple of inches. And would fit my head without large gaps. I have been using a Halloween bald cap that I tried to modify to fit my head, but because the material is flimsy the stencil shapes have to be cut into sections and then have to be connected when the bald cap is removed. I had my head cast. Which I did but I had to go to a place to get it done. Mind you I plan on doing other things with my head mold. The process for making this stencil can be done with just casting the scalp and ear area and doesn't have to include the face. I purchased a small (16"x16") Vacuum forming table. Got it on Etsy. Pm me if you want a link. You can also go on Youtube to learn how to make one. I used my house vacuum to create the suction. I also purchased a sheet of PETG from Amazon. .020" thickness. I also had a heat gun for this process. I made a cast from the mold of my head using Smooth-Cast 305 from Reynolds Advanced Materials. I made it a little bigger (deeper) than I had planned on. But I figured out a workaround without having to cut the head shape down. You can learn more about casting at the Smooth-On website. or you can search Youtube. I used the metal frame that came with the vacuform table and secured the plastic sheet I had cut down to the same size as the frame. I then put it in the over, raised a few inches above the metal wire shelf under my broiler (around 3-4") and let it sit for around 30-45 seconds. I pulled it out and pushed it down over the head form. My first try at molding the head stencil failed (mostly). When I first pulled the hot sheet down over the head form, it wouldn't stretch far enough down over the head form to reach the edges of the table to suction down the plastic. I tried using a heat gun while putting pressure on the plastic pulling it down, however this really didn't work very well. So, I tried again. This time I remedied the suction issue by building up walls of the vacuform table with Styrofoam I had in the house and then using duct tape to attach them to the table and seal the edges. This would allow the plastic sheet to come down onto the surface edge of the table to allow the suction of the vacuum to work on pulling down the extra plastic to the table. I repeated the steps like I did the first time with heating the sheet of plastic in the oven. I then pushed the sheet down over the head form onto the wall edges where it then started to suction down the plastic. The plastic cools quickly. When it does it will not stretch anymore. It still needed to form a bit more, so I used a heat gun (550 deg) in spots around the head form while the vacuum was on. Some spots I melted the surface and created holes where I had the heat gun to close to the plastic, so I patched them up with duct tape to create the suction again. I kept going around the head till I was happy with the results. I have cut the head shape out and will be drawing and cutting out the shapes of the tattoos that go on Ventress' head. The only thing I would like to do again differently is using a bit of a thicker sheet of PETG. I feel it would hold up better for future stenciling. For now, I will use this. But I am also currently ordering more PETG in a thicker sheet. I will be posting more pictures of the head stencil being cut tout and being used with the airbrush when I get there later today. If you do not know about Vacuum forming I suggest googling it to learn more. The first image is showing the vacuform table with the failed stencil to the right of the head form and the successful one still clamped to the frame for the vacuform table standing upright (you are looking at the top of the head). The second image shows how deep the forming of the plastic was made. You can also see the pieces of white duct tape I used to seal the holes where needed.
    2 points
  32. My costume was approved today! Yay! DS Mara Jade set complete!
    2 points
  33. Full makeup test. Getting closer to the colors I’m happy with. Thank god Mehron had a pastel yellow that works!
    2 points
  34. Practicing with just water paint at the moment. Crème/alcohol makeup will come later once I get the colors corrected. Trying to work on shading around the mouth. This was 90% free-handed with the exception of some stencils I made for the forehead.
    2 points
  35. So I’m back at it. Have 3 weeks of vacation and plan to get as much done as possible. I’ll document as much as I can. To start I am working on the bodysuit pattern. Used this one from Etsy. https://www.etsy.com/listing/719618406/catsuit-with-long-sleeve-and-front?click_key=a561c1118fd8fbc57a85f2c7e1c1efdf183cc41c%3A719618406&click_sum=1332445f&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=catsuit+pattern+pdf&ref=sr_gallery-1-9&organic_search_click=1&sts=1 It already has seams largely in the right places and has long sleeves. My plans for changing the parttern include: * re-draft the sleeves to move the seams * split the leg patterns into four parts * draft pleated knee pad section * create skirting pattern for lower half of bodice The pattern is printed in single pieces and I used translucent sketch paper to copy it. I highly recommend not cutting the original unless you’re okay with printing more copies if you mess up. I’ll put up the first step shortly.
    2 points
  36. Costume is finished just need to take approval photos. Sent from my iPhone using Tapatalk
    2 points
  37. Had my films redone after I made adjustments to the patterns. I’m very happy with them. Ive included a comparison photo for each pattern. The striped one goes on the bodysuit and the other is for the gloves. I’ve also decided to just give in and use capillary film instead of emulsion on my screens. Emulsion is messy and very time consuming. It also really sucks if you mess up and have to start again. Should arrive next week so I can screen print next weekend.
    2 points
  38. Great find by @Trachta! Custom belt for Reva on Etsy. I’ll need to customize it a bit to make it more accurate, but it’s one less thing to build myself. :) https://www.etsy.com/listing/1265073920/third-sister-belt-reva?click_key=53f5f3b76d0ba3cedeaf7830e93173ef209efb8d%3A1265073920&click_sum=3cff8fd3&ref=shop_home_active_29&sts=1
    2 points
  39. So I was able to sit down tonight after putting the padawans to bed and get the skirt done. Plenty of YouTube videos, coffee and swearing (due to pin pokes lol) and here it is!
    2 points
  40. I’m all about Reva! I can’t tell you how excited I am to get to play a face character. I don’t even need to change my hair. I’m researching fabric and looking for good images to get as much detail as possible. Need a good one of the boots.
    2 points
  41. I have photos! My sewist is coming tomorrow to drop off my soft parts and I am so excited! Some of them definitely need a good steam (especially the shawl), but I'll post some photos of me in them tomorrow.
    2 points
  42. I am approved with both versions of the wicked armor Nihilus. You have to add to both a bit to do it. The KOTOR2 mask they make would probably be approvable, but I changed the center detail to match the CRL better. You will also need to add the chest padding. I used a sheet of open cell foam, cut to fit. I recommend a different obi, but the one they sew into the skirt is approvable. In all cases, the wicked armor will give you the materials to do it, but go through the CRL and make it match up once you have it in hand.
    2 points
  43. Hi! Can i ask you what fabrics did you used? I'm getting mad searching and i'm not happy with my findings... T_T
    2 points
  44. Neck seal arrived!!! And now I'm waiting for the lightsaber.
    2 points
  45. Now it's really just neck seal!! (Please say saber is an option lol) The shoulder was smaller than the size I ordered but it's not bad for right now I think. Probably I'll slowly rebuild it later ;^)
    2 points
  46. Hello everyone, I have put together my Darth Revan build and summitted it for approval. I need to send more close up pics and stuff, but it was suggested to post here as well to get opinions from current members that had approved costumes. But I am not exactly sure where to post the pics at. Obviously the lightsabers are not part of the actual build, but this is the full costume minus BOOTS and actual PANTS which I was looking for ideas on where or what to buy. Thanks in advance for the help,
    2 points
  47. Hello friends! I'm a prospective member for the Bloodfin Garrison, and have been a handler for my father-in-law (Shadow Trooper, Imperial Officer, Imperial Gunner, Lord Vader), and wife (Snow Trooper, Imperial Royal Guard) for the last 4-5 years. I'm interested in doing a Mandalore the Ultimate costume, and have started to figure out what I will need to get it together. I don't have a TKID, or any other 501st memberships outside of this.
    2 points
  48. If its a Black Costume, Darth Vader is the number one mistaken name used. In my Starkiller hoth, I don't get names, I get questions "Who the hell are you?" In my Jawa, I get called a Tusken Raider. In my Malakili, again no names, just the reply that "that is probably the most comfortable costume in all of Star Wars". When outside in the hot sun, "That is the Smartest Costume"! Not trooped in my Garindan yet, but I will find out next week what comments I get in that costume.
    2 points
  49. Hi everyone! I'm prospective member of Ukraine Outpost and I'm going to do Mother Talzin costume for approve me as 501st member. So I decided to create this topic to show my work step by step. There is no clear CRL yet for this character, so I'll better to show all process and correct possible mistakes during processing, it's much easier than remaking of finished costume. Also I hope that my research will be usefull to next people who will do this character. So firstly what exactly parts does it consist of. I analyzed Talzin's stuff and see there the next items: 1) Top with long sleeves. Red with pattern sleeves decorated with reddish brown stripe, other part is plain red. 2) Leggings. Red fabric with the main pattern. 3) Neck piece. It's rather collar of the top, but as my sewing experience shows, it's much easier to do it as a separate piece. Plain red, has thick bubbled ruffles. 4) Bodice. Reddish brown as sleeves decoration and the same matherial. V-shape neckline to the collarbone. I was thinking a lot about quantity of the stripes. There are only 6 visible, but seam lines on the bust part points that there are another pair covered with skirt. 5) Shoulder pieces. The same patterned fabric as on sleeves and leggings. The length of single piece is easy to determine according to arm length. It should be from shoulder to wrist. 6) Skirt. Made of red matherial similar to the backing color of sleeves/leggings/shoulders but with large dark red pattern. Underlayed with some tight matherial to keep shape. Consist of three pieces. Side pieces are 1/2 wide of the middle back piece on the hem line. The length could be determined according to leg length. In the original it's about 2/3 of hip to floor. 7) Criss-cross scarf (tabards?). Made of the same fabric as sleeves/leggings/shoulders. The left piece cross over the right one both at front and back. 8 ) Pleated sash with belt and decorative stripes. The sash itself fitted to body shape. It's made of plain red matherial and has 4 pleats over waist line and 3 under waist line. Brown belt is made of leather-like matherial few tone lighter that bodice and sleeves decorations. Two decorative stripes on the front (floor long, the same matherial as sleeves/leggings) and two short on the back (the same color and matherial as belt) 9) Back "wings" 10) Headpiece 11) Boots 12) Makeup About the fabrics. I did pattern based on the screenshots and printed it on a fabrics (polyester for most pieces and matte spandex for leggings). I also added weathered texture which also visible on the original fabric. Skirt pattern is in progress yet, but I will print it also on polyester. For the bodice I purghased reddish brown faux leather. And here are the fabrics itself. It's both looks allmost identical, spandex just a bit softer. (I need shoot it outdoor in daylight, indoor light "eats" the colors) And the bodice pattern unassembled/assembled on a dressform. About the back shape - I did it repeating the "wings" piece. That's I have at the moment. I will add new materials as I work on the costume. PS: my English is far from ideal, but I keep practice and I'll be really appreciated if you'll notice me about possible mistakes. PPS: and thanks to @romero4444 from this thread. He collected really great references base.
    2 points
  50. So far it is looking good! Just smooth out the surfaces and you're rocking it.
    2 points
×
×
  • Create New...