Leaderboard

Just a quick update on what's going on with the detachment stuff since it's been a quiet period (not always a bad thing!). 1. We're actively designing merch for a racing shirt, patch, and coin themed for KOTOR 20th based on votes. These will come in the next few months. It is slow due to lack of artists available and, well, life. 2. We're working on 3 New to the Legion CRLs/costumes currently that we're hoping to be released before the end of the term in Feb after updates to the costumes are finished. 3. We were told by LMOs that we had to wait until the end of the season of Ahsoka before submitting requests for assignment of the costumes. But, after the short, "please don't spoil the episode for us" request time, we're submitting for Shin, Baylan, Morgan, Marrok, and all 3 Great Mothers to be assigned to TFE. 4. We're still looking for artists and a new Programs Officer if you're interested/able to assist the Detachment! If you have any other requests or ideas, please feel free to comment or message me!

It's finally here! Galactic Armory's V2 mask. Much more detailed and accurate than the old version. I figure I can fit red LEDs into the eye sockets to emulate the eyes.

Just as a head's up to anyone interested in doing this costume: It has been agreed that so long as the visible parts of this costume match the references available, I am good with allowing the missing parts to be supplemented from Eleena Daaru's references. With that, I look forward to seeing a high quality submission soon!

New guy here! I've been working on a spinning GI saber for a bit and it's starting to come along. I have a youtube channel documenting the build but I also wanted a build log for better documentation and thought 'what better place then with people who can give me some sound guidance.' So here I am! Looking forward to chatting with you grand folks. I'm pretty far along in the project, so I'll be updating this log until it catches up with progress.

Try everything on Boots & gloves are from Crowprops And now I'm searching for armors

Hi folks, I just wanted to share some of the pics I took during my shooting at the Georges Henri park in Brussels

Hello from Japan. I'm working on Darth Margas. Thank you for your opinion. Sent from my iPhone using Tapatalk

Korbanth has a Savage hilt for sale: https://korbanth.com/empty-double-sided-staff-the-oppressor

So close to being done. I need to redo the arm guards and chest armor and shorten the bottom corset pieces.

Hello everyone, I’m Daisy from the Dutch Garrison and together with Rikki I have been assigned as your LMO team for this term. About Me: My name is Daisy van Rijn, and this is my second term as a 501st Legion Membership Officer. I have eight approved 501st costumes, four in the Rebel Legion and I have a Seventh Sister costume that I'm hoping to finish this year. I have been sewing since I was 19 and love sharing that acquired knowledge with others. I'm excited to be able to assist you this year with the TFE Detachment as I have a large love for the Old Republic Era. What is an LMO? The Legion Membership Team is responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officers drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with member’s costumes. Have a question about membership these are the folks to talk to! There are LMOs you can contact at any time at Legion Officers however Rikki and I are the ones who are assigned to the Imperial Gunnery Corps this term. Thinking of starting a NTTL (New to the Legion) Costume? Please message the Detachment and me here as well as send a link to your build thread. I love researching new costumes and helping. Worried a costume may or may not be eligible for the Legion approval? https://databank.501st.com/databank/Costuming:CRLGuide See Character Approval and New to the Legion Costumes (NTTL) sections for details. For “New to the Legion” costumes please also have a look here: Costuming Standards Have a question? Do not hesitate to message me. Get your references together and sent to LMO (at) 501st (dot) com.

Today was play with makeup... I didn't get around to doing the back of the head tattoos. I do plan on making a stencil for that part. This took around 2 1/2hrs. Still learning the best way to work with the materials. I think I did a pretty good job.

I found this on StarWars.com if it helps.

Galactic Armory has updated and revised their Inquisitor mask, and I'm helping them attempt to model the hard parts on the belt. Thankfully the Inquisitor wears the typical jackboots, so that'll probably be the easiest part of the build.

Separate post: The mask from Galactic Armory arrived. It looks pretty spot on, we'll see how it holds up when the show comes out. As well, GA agreed to help me research the costume after the show airs and will help me develop any armor pieces or hard parts I may need.

So have been staring like a crazy person at the pictures I have again and think that the rubber at the center front of her costume and on the gauntlets is a rubber window seal. I'm buying a few typs of S and V shapes to do some experiments with that as well. All of my printing supplies have finally come in. I hadn't planned to do it all myself, but paying to have the screens made wasn't cheap and I screwed up the scale of one of the patterns, so I decided to just bite the bullet and buy what I need. I purchased blank screens with the proper thread count for dense prints and but 2 types of emulsion to try. Both are made for high density printing. I found a supplier online that prints the film negative of the pattern for pretty cheap ($10 for my small one and $25 for the larger plus shipping). They arrived in a few days. My next step is to make my first attempt at high density screen today. I'll take pictures and share links and things later. I'm going to start with the glove pattern first since it's small volume. I've also got the pattern for the bodysuit, so I will be adapting that for what I need so I can pattern out the parts for printing. Going to be a lot more activity over the next few months! A friend of mine that loves doing leather work is helping me iwth the armor and she has one of my boots to pattern out the new shaft. I did some initial tests for aging the boot vamp and those worked pretty well. When I get the leather parts back, I'll share images and how I did things for that too.

Big Update: My mask came in and it is gorgeous! I also have the armor finally smooth and ready to paint in a satin black. The soft parts are being worked on now, pleats for the sleeves were just finished recently and were a nightmare to do, the Kylo Ren costumers were right on how bad those were to sew lol.

So excited about this! Going to buy this gorgeous lightsaber from Shadowfoil props when they are ready for order.

I was so excited that I rushed to get all the changes made lol. Here is an updated photo.

Dropping these in here in case you haven’t seen them! Moses Ingram posted some BTS on her Instagram stories today including some shots that show how the costume layers. Hope they help!

All the armor is in the painting phase now and assembling the weapons now. No pictures I wish to share yet except maybe this:

Since I have been asked several times for different characters in GoH, both older and newly released, I'll make one post to hopefully help clear it up! 1. Yes, the current TFE Command and assigned LMOs for TFE support adding GoH versions of characters as eligible for TFE approval/new CRLs, SO LONG as there is a full 360 degrees of reference to show all the details. The view option in game makes that pretty much a non-issue, but we still need the highest resolution possible. 2. If the character in question already has an approved version in TFE, then a couple things can happen: a) If there are no differences between the approved version and the GoH version, then no new CRL is made and it is considered the same as the existing approval for said character. b) If there are differences between the approved version and the GoH version, then a new CRL can be made. In this case, it is considered a New to the Legion Work in Progress (NTTL WIP) and requires an entirely different approval process that includes the TFE Command Costume Staff and the TFE LMO directly. In this case (and any not already approved character, regardless of media source), it is recommended to contact the DL and LMOs directly so that the process can be set up and advisement can be given. In this case, you can contact the LMOs at LMO@501st.com and they will redirect to the proper folks, or email me directly at Nina501st@gmail.com and I can pull in our specific LMOs.

Making them turned out to be very easy for me. I used foam and Worbla. It was the first thing I made with Worbla, so even if you’ve never tried it before you might find it easy enough. You can read my blog about it here if it helps- http://withoutastitchon.blogspot.com/2016/04/mara-jade-knees-and-shin-guards.html?m=1

Hey all, I started researching the costume when I saw the character in the trailer, so I'm eagerly waiting for the show to drop so I can get more details about the new Inquisitor. The new Inquisitor looks awesome. Things I've noticed so far from repeated viewings of the trailer: -cloak has a tattered appearance and is knee length -typical jackboots -belt is untextured with only a flat buckle, no disc detail -belt has boxes with lights on it, need better reference -gloves have bird-like talon -cloak has imperial cog on both shoulders -hood is double folded -padded thighs So stay tuned as I keep up my research and post new details, etc. Currently trying to find a vendor who will help with the cloak and hood.

Hey people, LucasFilm and Disney just announced a new show coming named "Tales of the Empire"! And the unknown inquisitor is also in it! Hopefully this will help everybody to make the costume perfect

People in my garrison (Diamond Garrison; Womp Rat Pack Squad) convinced me to make Savage Opress. I have an approved Darth Maul (Instagram @ozark_maul). A fellow garrison member will make his own Darth Maul and I'll do Savage. We'll be the Sith brothers and I can help him with his Maul costume/makeup. I have ordered makeup, started practicing the shapes, and have the materials to sculpt my horns. I'm meeting with a seamstress next month to work out the soft parts (particularly the leather vest). I'll update this thread whenever I have something worth sharing! Cheers!

We're about 1.5 weeks away from all 501st elections! This means Legion level, Detachments, Garrisons, Squads, and Outposts! Make sure you are prepared for TFE Detachment elections by ensuring you are listed as the correct Detachment Member rank. Also check with each Detachment to ensure that you fulfill their specific requirements if they are different! For TFE directions, please see here: I will be doing the final update to the 501st roster for TFE on Jan 28th, so please make sure you are correctly listed (your name should be in orange if you are not part of command). Cheers and long live democracy!

Racing shirt is in the works!

New forum member here and not yet 501st approved but building the clone wars CRL. I made this on a whim because I was so obsessed with the figure! Figured you might like to see. Would be so cool to have this approved. I even got a shout out from the guys who sculpted it!

If a costume that you want to build is not currently in the Legion roster, you'll be coordinating directly with the Detachment. The order is operations for the process is as such: 1. Contact me with all the references you are able to grab to validate the details of the costume, and an excerpt describing why the character should be included into the Legion. The references will be tossed into a Google drive that we send the link to. 2. I'll take all of that and submit to the assigned TFE LMOs, who will take the info to the main LMO group for a 7 day vote on legitimacy. 3. If the vote passes, you'll want to start a build thread here and keep us in the loop as you build to the references. We do not do pre approval CRLs because we don't want you building to words, but to the actual references. 4. Once built, you will let us know so we can get everything uploaded into the drive folder to go through analysis by TFE DCAs. 5. If it passes DCA approval, it will move to LMO approval. Again, another 7-day vote will occur. 6. If approved, we will begin final work on the CRL, including getting CRL photos from you. If not approved, changes will be relayed and then start again at step 4. 7. Final CRL will go through LMO confirmation and approval, and then once published, we'll work with you to get the information with your GML to assign the costume to your profile. If there are any questions, please ask!

I’m skipping way ahead. I got a little hyper focused and just didn’t follow up with documentation. I have been taking pictures as I go. I have a photoshoot next Sunday and had to step up my game. Finished the bodysuit (sort of) and took some pics. The cape clips on to my shoulders. still to do: Place Velcro to hold armor in key locations Belt - cut to length, finish painting greeblies, wire LED Armor - apply Velcro, repattern collar, model greeblie for guantlets Boots - A friend is working on them for me cape - hem and shorten clip straps saber - all the things

Pattern review: Third Sister Pattern (from Etsy) https://www.etsy.com/listing/1255438991/third-sister-inquisitor-reva-costume?ref=yr_purchases DISCLAIMER: This opinion is only based on the use of the pattern for accuracy. It’s probably fine for basic cosplay. There were many issues I found so I’ll talk about that first and then how to possibly fix them if you really want to use the patterns. 1. Sizing - there is no information on the size ranges that fit the pattern (I.e. bust, waist, and hips). The listing says M/L and that larger is available upon request but it needs to be more specific since that is arbitrary unless ASTM measurements are used. There is only one size in the purchase so if you don’t fit it it you’ll have to buy the next one up. 2. Accuracy - this is the main reason I wouldn’t recommend the pattern. It’s pretty clear from the patterns that the maker never saw reference photos that included a back view. * the collar is missing the back piece and greeblies * the shaping of the back shoulder armor is incorrect Boots pattern is odd. It isn’t tall enough to cover a tall boot. It’s better suited to an ankle length. This isn’t a con per se but the pattern is made for EVA foam and not for sewing. That makes some of the shapes odd. If you still want to use the pattern anyway you’ll need to do some redrafting. - mock up everything to check fit. You’ll need to make sure your proportions are correct. (I had to redraft using a basic bodice pattern that fit me) - discard the belt and pauldrons and the waist pieces will take some work. as for the materials, I’m actually using EVA foam covered in faux leather for my armor, but I’ll share those details in the next post. The important point is that I didn’t piece curved parts. Instead everything is heated and curved on the body as needed. In conclusion, the pattern is not for a beginner. I have over 20 years of costuming and patterning experience and I gave up on most of it as salvageable. Now I may be knit picking but I am a stickler for accuracy.

Ok, a few updates. Outer cloak is almost done. I stenciled the large shoulder cogs today and once they dry will touch them up and that should be done. Inner cloak is almost done, just need to finish and attach the half cog clasp. Also pictured are the bracers and lighted belt boxes. Will need to design and print the elbow guards to attach to the bottom of the bracers. Progress!

Hi Jan! I'm glad to see you are already starting to get some feedback. There used to be a tutorial for creating a Jedi Robe, which my mom modified to create my robe. I believe she shortened the sleeves and altered the hood construction so that there was no visible seam. The site that the tutorial was on looks like it has been archived, but there is a pdf that was saved. I'll attach that. Jedi Sith Robe tutorial pattern.pdf

Costume is finished just need to take approval photos. Sent from my iPhone using Tapatalk

Took this pic yesterday. The belt boxes need to be sanded and painted, but I finished the lights yesterday. This is everything I have up to this point. No laughing as its still really early! That's the version 1 mask from Galactic Armory. The correct version is finishing printing today. Not pictured is what I guess I will call the outer cloak that I've got from a previous kit. It also would look better on a person and not laid flat.

Was able to do a small swatch test with the glove pattern and I’m much happier with it.

Lightsaber update By now I'm sure you've seen it on tic tok and instagram, the LGT Grand Inquisitor *inspired* lightsaber. I knew this would happen. I knew I'd finish this costume and then with the release of Kenobi someone would finally make the Grand Inquisitor lightsaber for real. I just thought it would be the live action version and not rebels version. But here we are. So surprise I bought it. Dark Wolf had the best price I could find for it at $650 for a xeno pixel. I still have no idea what the difference between a xeno and a proffie is but I wanted to save $100 and try it out. My opinions on this saber... It's cool but could be better. Not as much of a fan of the xeno pixel option vs the proffie. The effects are all the same like clash and tip drag and fonts are all the same pretty much, but the proffie does a much better job executing these effects. For example on the proffie for clash effect, hold the button and hit the blade and it will clash until you release the button, and the sound will resonate for an extra second like a thunder clap. With the xeno option the sound just stops abruptly when you release the button. Same difference with the other effects as well. Just seems to me like even with the price difference, it doesn't seem like the sounds should be this different especially with it still being expensive. The hilt itself I think looks very nice. It's not a replica but inspired so I know it looks different than the show. Mostly the polished aluminum shouldn't be a thing here. The hilt should be a gun metal, dark grey, not polished aluminum. Besides that, looks-wise, it's a nice hilt. It folds and has the red buttons (fake buttons) on either side. There is a squeak sound on mine that I can't figure out where its coming from. Either squeaking in the chassis or on the metal shroud around the grip, I'm not sure. There are several moving parts on this hilt so I guess that is to be expected. One concern I do have is for the battery life. I have not found an option on the xeno pixel that will tell me the battery percentage like the proffie does. And with this being two blades on a single battery I fear it will not last nearly as long. I've noticed after playing with it for a while, changing fonts over and over and playing music on it, the top blade tends to not light properly after a while. Like its too much to keep both blades going especially with the music also playing. Maybe its a connection issue to the blade but idk. Also have found that if opening and closing the rings this sometimes makes the blade connection go bad because of how it all screws together. So overall, it's a really nice one, but some things could function better especially for this price. And for it being the ONLY metal hilt Grand Inquisitor lightsaber, probably everyone in this group should get one.

Where did you source the jersey? That looks promising.

So I was able to sit down tonight after putting the padawans to bed and get the skirt done. Plenty of YouTube videos, coffee and swearing (due to pin pokes lol) and here it is!

I’m all about Reva! I can’t tell you how excited I am to get to play a face character. I don’t even need to change my hair. I’m researching fabric and looking for good images to get as much detail as possible. Need a good one of the boots.

Similar to the BHG Greedo CRL that is being grandfathered in 6 months due to inaccuracies and lack of member desire to correct them, we have decided, along with LMOs, that the Starkiller: Dark Apprentice Robes CRL will be grandfathered 6 months from today (October 1st, 2022). There is only 1 member approved with this costume, and they have previously responded that they do not intend to update the costume to better suit the references. Given this, if any other members want to work with the Detachment to improve the costume, then the CRL can stay published. Once grandfathered, any new costumes of this CRL must go through a full NTTL process.

Lower back "spine corset" is modeled and will be printing once I do another fit test with shoulders and back plate to ensure length is proper on the lower back spine. Will be using 1/8" plexiglass or aluminum for the "wings" and secure the cordage tabs along it with small wooden dowels cut to fit into the holes I will punch through the wings. Epoxy filled and sanded smooth should secure the tabs to the wings, and will be running two 3/16" metal rods into the holes I bored in the middle spine part to give it strength from snapping.

I am approved with both versions of the wicked armor Nihilus. You have to add to both a bit to do it. The KOTOR2 mask they make would probably be approvable, but I changed the center detail to match the CRL better. You will also need to add the chest padding. I used a sheet of open cell foam, cut to fit. I recommend a different obi, but the one they sew into the skirt is approvable. In all cases, the wicked armor will give you the materials to do it, but go through the CRL and make it match up once you have it in hand.

Any news on the fabric used? Enviado desde mi SM-M205FN mediante Tapatalk

Neck seal arrived!!! And now I'm waiting for the lightsaber.

Here are front and back pics of tunic, pants and cape the I made. I hope this will help you guys. Tunic Pants Cape

Current LMOs say they're good with it being valid for 501st entry so long as the references are met! Given the HD quality in the game, things like fabric texture are expected to be matched vs older games, and small details are important! Just a heads up. I know JoEllen did a beautiful job pulling textures for Second Sister, so the capability is there.

Yoke and cape finished

Hello friends! I'm a prospective member for the Bloodfin Garrison, and have been a handler for my father-in-law (Shadow Trooper, Imperial Officer, Imperial Gunner, Lord Vader), and wife (Snow Trooper, Imperial Royal Guard) for the last 4-5 years. I'm interested in doing a Mandalore the Ultimate costume, and have started to figure out what I will need to get it together. I don't have a TKID, or any other 501st memberships outside of this.