Leaderboard

Just a quick update on what's going on with the detachment stuff since it's been a quiet period (not always a bad thing!). 1. We're actively designing merch for a racing shirt, patch, and coin themed for KOTOR 20th based on votes. These will come in the next few months. It is slow due to lack of artists available and, well, life. 2. We're working on 3 New to the Legion CRLs/costumes currently that we're hoping to be released before the end of the term in Feb after updates to the costumes are finished. 3. We were told by LMOs that we had to wait until the end of the season of Ahsoka before submitting requests for assignment of the costumes. But, after the short, "please don't spoil the episode for us" request time, we're submitting for Shin, Baylan, Morgan, Marrok, and all 3 Great Mothers to be assigned to TFE. 4. We're still looking for artists and a new Programs Officer if you're interested/able to assist the Detachment! If you have any other requests or ideas, please feel free to comment or message me!

It's finally here! Galactic Armory's V2 mask. Much more detailed and accurate than the old version. I figure I can fit red LEDs into the eye sockets to emulate the eyes.

Just as a head's up to anyone interested in doing this costume: It has been agreed that so long as the visible parts of this costume match the references available, I am good with allowing the missing parts to be supplemented from Eleena Daaru's references. With that, I look forward to seeing a high quality submission soon!

New guy here! I've been working on a spinning GI saber for a bit and it's starting to come along. I have a youtube channel documenting the build but I also wanted a build log for better documentation and thought 'what better place then with people who can give me some sound guidance.' So here I am! Looking forward to chatting with you grand folks. I'm pretty far along in the project, so I'll be updating this log until it catches up with progress.

Try everything on Boots & gloves are from Crowprops And now I'm searching for armors

Hi folks, I just wanted to share some of the pics I took during my shooting at the Georges Henri park in Brussels

Hello from Japan. I'm working on Darth Margas. Thank you for your opinion. Sent from my iPhone using Tapatalk

Korbanth has a Savage hilt for sale: https://korbanth.com/empty-double-sided-staff-the-oppressor

So close to being done. I need to redo the arm guards and chest armor and shorten the bottom corset pieces.

Hello everyone, I’m Daisy from the Dutch Garrison and together with Rikki I have been assigned as your LMO team for this term. About Me: My name is Daisy van Rijn, and this is my second term as a 501st Legion Membership Officer. I have eight approved 501st costumes, four in the Rebel Legion and I have a Seventh Sister costume that I'm hoping to finish this year. I have been sewing since I was 19 and love sharing that acquired knowledge with others. I'm excited to be able to assist you this year with the TFE Detachment as I have a large love for the Old Republic Era. What is an LMO? The Legion Membership Team is responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officers drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with member’s costumes. Have a question about membership these are the folks to talk to! There are LMOs you can contact at any time at Legion Officers however Rikki and I are the ones who are assigned to the Imperial Gunnery Corps this term. Thinking of starting a NTTL (New to the Legion) Costume? Please message the Detachment and me here as well as send a link to your build thread. I love researching new costumes and helping. Worried a costume may or may not be eligible for the Legion approval? https://databank.501st.com/databank/Costuming:CRLGuide See Character Approval and New to the Legion Costumes (NTTL) sections for details. For “New to the Legion” costumes please also have a look here: Costuming Standards Have a question? Do not hesitate to message me. Get your references together and sent to LMO (at) 501st (dot) com.

Today was play with makeup... I didn't get around to doing the back of the head tattoos. I do plan on making a stencil for that part. This took around 2 1/2hrs. Still learning the best way to work with the materials. I think I did a pretty good job.

I found this on StarWars.com if it helps.

Galactic Armory has updated and revised their Inquisitor mask, and I'm helping them attempt to model the hard parts on the belt. Thankfully the Inquisitor wears the typical jackboots, so that'll probably be the easiest part of the build.

Separate post: The mask from Galactic Armory arrived. It looks pretty spot on, we'll see how it holds up when the show comes out. As well, GA agreed to help me research the costume after the show airs and will help me develop any armor pieces or hard parts I may need.

So have been staring like a crazy person at the pictures I have again and think that the rubber at the center front of her costume and on the gauntlets is a rubber window seal. I'm buying a few typs of S and V shapes to do some experiments with that as well. All of my printing supplies have finally come in. I hadn't planned to do it all myself, but paying to have the screens made wasn't cheap and I screwed up the scale of one of the patterns, so I decided to just bite the bullet and buy what I need. I purchased blank screens with the proper thread count for dense prints and but 2 types of emulsion to try. Both are made for high density printing. I found a supplier online that prints the film negative of the pattern for pretty cheap ($10 for my small one and $25 for the larger plus shipping). They arrived in a few days. My next step is to make my first attempt at high density screen today. I'll take pictures and share links and things later. I'm going to start with the glove pattern first since it's small volume. I've also got the pattern for the bodysuit, so I will be adapting that for what I need so I can pattern out the parts for printing. Going to be a lot more activity over the next few months! A friend of mine that loves doing leather work is helping me iwth the armor and she has one of my boots to pattern out the new shaft. I did some initial tests for aging the boot vamp and those worked pretty well. When I get the leather parts back, I'll share images and how I did things for that too.

Big Update: My mask came in and it is gorgeous! I also have the armor finally smooth and ready to paint in a satin black. The soft parts are being worked on now, pleats for the sleeves were just finished recently and were a nightmare to do, the Kylo Ren costumers were right on how bad those were to sew lol.

So excited about this! Going to buy this gorgeous lightsaber from Shadowfoil props when they are ready for order.

I was so excited that I rushed to get all the changes made lol. Here is an updated photo.

Dropping these in here in case you haven’t seen them! Moses Ingram posted some BTS on her Instagram stories today including some shots that show how the costume layers. Hope they help!

All the armor is in the painting phase now and assembling the weapons now. No pictures I wish to share yet except maybe this:

Since I have been asked several times for different characters in GoH, both older and newly released, I'll make one post to hopefully help clear it up! 1. Yes, the current TFE Command and assigned LMOs for TFE support adding GoH versions of characters as eligible for TFE approval/new CRLs, SO LONG as there is a full 360 degrees of reference to show all the details. The view option in game makes that pretty much a non-issue, but we still need the highest resolution possible. 2. If the character in question already has an approved version in TFE, then a couple things can happen: a) If there are no differences between the approved version and the GoH version, then no new CRL is made and it is considered the same as the existing approval for said character. b) If there are differences between the approved version and the GoH version, then a new CRL can be made. In this case, it is considered a New to the Legion Work in Progress (NTTL WIP) and requires an entirely different approval process that includes the TFE Command Costume Staff and the TFE LMO directly. In this case (and any not already approved character, regardless of media source), it is recommended to contact the DL and LMOs directly so that the process can be set up and advisement can be given. In this case, you can contact the LMOs at LMO@501st.com and they will redirect to the proper folks, or email me directly at Nina501st@gmail.com and I can pull in our specific LMOs.

Please move this to the forum that you think is most appropriate if this is not the right one. What is an LMO? The Legion Membership Team are responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officer drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with members costumes. Have a question about membership these are the folks to talk to! LMO@501st.com *Thinking of starting a NTTL (New to the Legion) Costume? Please make sure you keep in contact with the Detachment. *For “New to the Legion” costumes please have a look here: http://databank.501st.com/databank/Costuming:CRLGuide Here is a brief list of some of the improvements we have planned for this term: • Communication, Clarity and Consistency: Utilizing the legion forum to regularly engage the membership and command staff alike through open and transparent lines of communication. (Ongoing) • Increase engagement with Detachment Leaders: Regular group meetings and conference calls to work with each other as a team. (Q1) • Launching “CRL Development Guide”: (Q1) • Streamline and document the process of creating and changing CRLs: (Q1) • Update the LMO Survival Guide: This will help current and future LMO understand the role and it’s responsibilities. (Q1) • CRL attainability: Ensuring CRLs and costumes attainable for all people in all countries and walks of life. (Ongoing) * Finishing 75% of unfinished CRLs: Supporting the detachments to find models and writing text for CRLs that are not yet green. (Q3) • Add galleries to every CRL: Increasing the use of detailed reference imagery in CRLs (Q3) • Create CRL Development Forums: Utilizing the legion forums for open and transparent development of new the legion CRLs.. (Q3) • Encouraging GML Feedback: Engaging the GMLs to ensure they know the LMO team is here to support them. Make formal efforts to receive feedback from GMLs about CRLs and the approval process. (Ongoing) • Regular Membership Surveys: We want to know what the members want. We serve the membership. (Ongoing) About Me My name is Dawn Bright and I am the LMO for the 501st Legion, ALMO with the Rebel Legion, I have previously served as XO of the Flagship Eclipse (501st) and the Senatorial Detachment (RL), GML of Southern California Garrison and a Legion Costume Judge (LCJ) for the Rebel Legion. I love making costumes (with an emphasis on EU and new to the legion), I have almost 60 (RL/501) Legion approved costumes. In my normal day to day life I am an Administrator of a care home for developmentally delayed adults in independent and inclusive living situations in sunny Southern California. I work with family's and social workers to establish communication between what the families and residents want for themselves to feel productive and able and I institute success for people in need. I'm a people person and as an LMO I put members first and foremost. People like you with passion for the costumes in this Detachment. We are all volunteers who have spent hundreds of dollars or/and hundreds of hours making costumes. I promise you that you will be treated with respect and deserve honest and efficient results. I look forward to serving you and working with this fine Detachment About the Team Michael Capell CT/SL/ID-3037 Timberline Garrison Michael has been an LMO and on the LMO Team for about a decade. He has done many things in the Legion since his wife told him she was joining and that he needed to as well. He has been the SLD Webmaster for ten years, as well as (over the years) been a GXO, GML, GWL, and GEC. He specializes in Clones, EU / Legends, Sith Lord costumes, and helping people where he can. He’s looking forward to another term helping expand our Costume Reference Library. Blair Douglas ID-12266 Midwest Garrison Blair is new to the LMO team but has served as a liaison for unity for the clubs for many years. She has LMO experience with the Rebel Legion and has led an effort in the RL around costume approval reform with a concentration on maintaining quality, improving consistency, and making approvals attainable. Her experience will help us address some of the current pain points within the 501st system. An additional bonus is that Blair is a lead software engineer by day helping to provide Fortune 500 companies technical solutions for their business needs. Her professional experience will also help us assess the current state of the systems supporting costume approvals and help to figure out how to improve them to facilitate a more positive costume approval experience. Fun fact Blair plays bass in the band Soft Speaker, extra fun fact she paid her way through college playing bass in a U2 tribute band and her nickname was Madame Clayton. Kris Kobus ID-33633 United Kingdom Garrison Kris is new to LMO but has held positions such as XO and DCA for the IOC and Events administrator for his Garrison where he is also a Officer costume adviser. Kris is a workaholic and does not believe in sleep so is usually always available no matter the time zone. Brian Anderson TK-7602 New England Garrison Brian has been the LMO team lead previously. He was one of the driving forces of Detachment empowerment and pushed for CRL changes. Brian has been on local staff and Detachment level staff for many years and brings a wealth of knowledge and experience to the table. Brian is known as the “make it look like the picture!” guy when it comes to standards and truly embraces current Legion culture. Eric Brager TK-9674 New England Garrison Eric was the lead LMO for the 501st Legion two terms from 2015 to 2017. He has twice been elected FISD Detachment Leader and has held a number of garrison level command positions in the 501st Legion We are so very excited to work with you guys! One thing I love so much about Detachments is the love for new CRLs and the passion. Both of which are very near and dear to my heart. Please do not hesitate to reach out to the Detachment or LMO team. I prefer messages Here or to LMO@501st.com that way I keep record of them and can tag appropriate parties Thank you and have a nice day, Dawn Bright SL-13377 www.SL13377.com https://www.501st.com/members/displaymember.php?userID=15902&costumeID=343

Here's the thing: these are animated characters. There isn't just one right answer because these are like art; the reference can support a handful of interpretations. The armor color is mottled, and is not just one color. I'll give an example of my favorite boots. These are black underneath, and the wax polish on top marked them look anything from grey to dark brown, but I know for a fact that the leather is black because I'm the one who put the polish on. It is the weathering that dictates how people interpret it, but these are what they looked like when I bought them: This is a real world translation of what the armor looks like in the cartoon. Now to the CRL. It is an animated cartoon, and just like 99% of the rest of our CRLs in TFE, the colors change as much as the number of times the character is seen. There is an accepted level of colors on a gradient that could be argued for the character's armor, but that does not make the CRL wrong. We only make CRLs for, "variants" that are approved, otherwise we'd have a 48 page long CRL for Aphra, alone, with all the Barbie dress up versions she has in the comics. So the correct statement isn't, "how can we make it not inaccurate?", but, "do I have the references to validate my interpretation for approval, which can then be ADDED to the existing CRL that already has done so?". The answer to that lies with the Detachment Leader, LMO, and your GML on how well you replicate the references to the real world.

Making them turned out to be very easy for me. I used foam and Worbla. It was the first thing I made with Worbla, so even if you’ve never tried it before you might find it easy enough. You can read my blog about it here if it helps- http://withoutastitchon.blogspot.com/2016/04/mara-jade-knees-and-shin-guards.html?m=1

Some of my favorites I've gotten as Darth Nihilus: Darth Maul (no real shock there) Thor (no clue how the kid came up with that one) Mulan (dad was possibly drunk, or raciest, or both...) And today I heard this story from one of my local troopers talking to a little girl dressed as a stormtrooper - "Well, I'm going to go over there and talk to Darth Vader with the skeleton face ...bye!"

Hi Kyle, When I started doing some research into this costume, I messaged @Cookiedala for some advice, she mentioned this about color: " I would really go for a charcoal grey (almost black!) color and weather slightly on that." I would agree that a dark grey is the way to go with the capes and suit and leave the boots, gloves, and forearm bracers to be black. I know we will be getting some additional looks at this character in Tales of the Empire which releases May 4 and I just learned that there will be a limited series of comic books on the Inquisitors releasing in July! I am hoping we can get some additional images and hopefully a name/number for this Inquisitor in the comics. I am holding off starting my own Research/WIP thread until after those two new resources come out. I am excited to see that you are working on this costume!

Well, it has been some time, since I have made a new costume, but now I am finally at it again, and after having made 3 Nihilus costumes for others, 2 COFT and 1 KOTOR, I decided to go with the COFT version. This will be my 3rd TFE and my 9th 501st. costume . What can I say other than I love to make costumes, to find all the right parts and getting it all together. I´ve already done : inner and outer tunika quilted and ribbed sleeves innerskirt obi got the boots and gloves sorted out primed the two masks primed the formed hood from Twilék Pam Now I need to put the belt together, got all the parts - just need a leather hole tool, think my dad may have one otherwise I´ll have to use a nail and hammer I need to give the masks and the formed hood the final coats. I also need to make the outer skirt and get the right length on the cape + find a way to attach it to the formed hood (thinking snaps or magnets) + shorten the sleeves + get the parts tattered. Guess a 2-3 weeks, then I should be ready to send in the pics for the GML team...

There is no embargo on making a costume - if you can provide the reference pictures of the costume from all sides incl. details and such, it should be good to go. You can also message our DL @DarthValkyria and ask on how to

Thanks LordZedel for clarification - verification. For mine - I use the Etsy neck seal combined with a vest with a v-neck shape to it. Similar look to the bottom pict you reference.

I will do a better write up of this in the next month or so. I will write more about how to make a casting of your head and such, but for now this is how to make the actual hard plastic re-usable stencil. Okay so this is going to be a bit of a long post. For my Ventress I have been planning trying to make a hard plastic stencil to use for airbrushing my Asajj Ventress tattoos on the scalp part of the head. I wanted something that is pretty much a continuous shape that doesn't have to have sections that need to be created every couple of inches. And would fit my head without large gaps. I have been using a Halloween bald cap that I tried to modify to fit my head, but because the material is flimsy the stencil shapes have to be cut into sections and then have to be connected when the bald cap is removed. I had my head cast. Which I did but I had to go to a place to get it done. Mind you I plan on doing other things with my head mold. The process for making this stencil can be done with just casting the scalp and ear area and doesn't have to include the face. I purchased a small (16"x16") Vacuum forming table. Got it on Etsy. Pm me if you want a link. You can also go on Youtube to learn how to make one. I used my house vacuum to create the suction. I also purchased a sheet of PETG from Amazon. .020" thickness. I also had a heat gun for this process. I made a cast from the mold of my head using Smooth-Cast 305 from Reynolds Advanced Materials. I made it a little bigger (deeper) than I had planned on. But I figured out a workaround without having to cut the head shape down. You can learn more about casting at the Smooth-On website. or you can search Youtube. I used the metal frame that came with the vacuform table and secured the plastic sheet I had cut down to the same size as the frame. I then put it in the over, raised a few inches above the metal wire shelf under my broiler (around 3-4") and let it sit for around 30-45 seconds. I pulled it out and pushed it down over the head form. My first try at molding the head stencil failed (mostly). When I first pulled the hot sheet down over the head form, it wouldn't stretch far enough down over the head form to reach the edges of the table to suction down the plastic. I tried using a heat gun while putting pressure on the plastic pulling it down, however this really didn't work very well. So, I tried again. This time I remedied the suction issue by building up walls of the vacuform table with Styrofoam I had in the house and then using duct tape to attach them to the table and seal the edges. This would allow the plastic sheet to come down onto the surface edge of the table to allow the suction of the vacuum to work on pulling down the extra plastic to the table. I repeated the steps like I did the first time with heating the sheet of plastic in the oven. I then pushed the sheet down over the head form onto the wall edges where it then started to suction down the plastic. The plastic cools quickly. When it does it will not stretch anymore. It still needed to form a bit more, so I used a heat gun (550 deg) in spots around the head form while the vacuum was on. Some spots I melted the surface and created holes where I had the heat gun to close to the plastic, so I patched them up with duct tape to create the suction again. I kept going around the head till I was happy with the results. I have cut the head shape out and will be drawing and cutting out the shapes of the tattoos that go on Ventress' head. The only thing I would like to do again differently is using a bit of a thicker sheet of PETG. I feel it would hold up better for future stenciling. For now, I will use this. But I am also currently ordering more PETG in a thicker sheet. I will be posting more pictures of the head stencil being cut tout and being used with the airbrush when I get there later today. If you do not know about Vacuum forming I suggest googling it to learn more. The first image is showing the vacuform table with the failed stencil to the right of the head form and the successful one still clamped to the frame for the vacuform table standing upright (you are looking at the top of the head). The second image shows how deep the forming of the plastic was made. You can also see the pieces of white duct tape I used to seal the holes where needed.

So, I just started writing out a potential CRL today. My understanding is that the 501st won't be making this a regular CRL but could make it a Legion Level Approval costume. I have been in contact at the Legion level and was instructed to provide a serviceable CRL first.

My costume was approved today! Yay! DS Mara Jade set complete!

Ok, full suit up day! Still have lots of finishing touches and I'm just using a pair of underarmor running gloves until I finish the gloves, but this is all the pieces. Double cloaks, bracers, belts, etc. Also did a walking test outside and the double cloaks look awesome when walking. Link to other pics.

Hey everyone. So got some stuff done over the last week. Here are photos of the soft parts done. I'm going to be working on my greaves, guantlets, collar and corset belt over the next two weeks, along with playing with more makeup. I'll post pictures soon with my next makeup practice (hopefully this weekend). Cheers!

Was able to do a small swatch test with the glove pattern and I’m much happier with it.

Had a productive day today. But I’m going to share a little of the drama. Originally I had a screen shop make 2 screens for me. It was expensive. Unfortunately one of the patterns was sized wrong. Since the screens were expensive I decided to make one myself. Cut sad music. Making a high density screen with emulsion is not done often for a reason. It takes a lot of skill. Usually a capillary film is used, but I just couldn’t justify the cost. The cheapest I found in a good size was over $100US. No thank you. Luckily I have some knowledgeable people at work. I finally have a screen I can burn (it’s drying as I type this) The screen that was the right size wasn’t very thick so I wasn’t sure what the result would be. Unfortunately the fabric I’m using shrinks significantly under the high heat used to cure the ink which made multiple passes impossible, but I’m happy with the result. The color in the images is washed out a bit. The ink is actually grey. Now I will get my pattern sorted and I’ll do the final prints.

Initial suit up cheesin. I'm very pleased with how this is looking so far and I'll be very happy to get the helmet finished. Really not too much different than in Kenobi and I'm going to be called Darth Vader anyways so why does it really matter [emoji6] I'll make changes to the lightsaber and the boot/greave debate at some point but for now I'm totally good with this. It's funny, I started this well before it was ever announced the Grand Inquisitor would be in Kenobi and I knew there would be costume changes but I was way too far into this to stop lol. I couldn't be happier though with his live action inclusion.

I have photos! My sewist is coming tomorrow to drop off my soft parts and I am so excited! Some of them definitely need a good steam (especially the shawl), but I'll post some photos of me in them tomorrow.

Given the slightly relaxed state of the current LMOs over Legends material, I'm revisiting the possibility of this one being approvable. So far, they seem very receptive to the idea given the tiny amount that isn't able to be seen.

Waiting on dem comments and oppinions like...

Hi! Can i ask you what fabrics did you used? I'm getting mad searching and i'm not happy with my findings... T_T

Now it's really just neck seal!! (Please say saber is an option lol) The shoulder was smaller than the size I ordered but it's not bad for right now I think. Probably I'll slowly rebuild it later ;^)

Current LMOs say they're good with it being valid for 501st entry so long as the references are met! Given the HD quality in the game, things like fabric texture are expected to be matched vs older games, and small details are important! Just a heads up. I know JoEllen did a beautiful job pulling textures for Second Sister, so the capability is there.

Hi I used a normal shirt pattern for the tunics and moded it so it fit - the same with the skirts, and just winged it, so sadly I don´t have an exact pattern for them.

Yoke and cape finished

I have wanted to make this version of Mara Jade for quite awhile. My only current approved Mara is the Arica disguise and can't really wear that to troops. My main issue was the bodysuit. I can sew but I don't have a serger and knew to get the proper fit, I would need one. I also was extremely confused on the diamond pattern and how to make it work properly. My last issue was budget. I can't afford to commission this so I knew that if I wanted to do this costume, I would have to make it myself, with help. I was very fortunate that my friend offered to assist me in my build and yesterday we were able to make and complete the bodysuit and it works great! We used the YaYa Han McCalls bodysuit pattern as a base. I am a very visual person so I try to sketch out what I want with my rudimentary art skills before I actually attempt any actual cutting etc. The main changes needed to the pattern are on the front. The shoulder princess seams and piping needed to be added in as well as the diamond on the front and the quilted stripes on the inside of the thighs. We ended up going with View D. The first step was cutting out the pattern. This pattern is RIDICULOUSLY oversized. With my measurements, it put me at a size 20. We cut the pattern at a 10. I used a 4 way stretch spandex I found in LA at Shavali Fabrics. Although I had purchased 4 yards, we ended up only needing around 2. The pattern calls for 1 3/8 I believe but that was inaccurate. The quilted area needed a bit more fabric and we removed the collar and the sleeves from the pattern accordingly. After the pattern was cut out, I taped it together including the 5/8 seam allowance as I went. Once this was done, the real work began. We traced out the new seam lines that would need to be added and then cut those out and retraced the entire pattern on pattern paper. Here is the revised pattern with necessary pieces put in. This is what the front of the bodysuit looked like with the modifications. We also eliminated the stirrup component and cut it straight down to end like a regular legging instead. The longest piece has the new princess seams and a reduced shoulder so it fits the CRL requirements. The crotch portion became a separate piece as did the quilted areas. The back princess seams are not a requirement and since I for one don't particularly like how those seam lines look on me personally, I omitted them and kept the back portion of the pattern as is. Here are all the pattern pieces laid out and ready to be cut. Only 2 pieces needed to be cut on the fold. That was the center panel piece and the crotch. I also ended up cutting 4 of the quilted area section and then cut an additional 2 for the batting for that. For reference, my fabric was 60 inches wide. You may need to adjust accordingly if you are working with less fabric. I ended up purchasing 2 packages of Wright's black piping and basted it to the side panels before beginning to attach everything together. The quilting was simple once I figured out how to get the minimum six panels I needed and drew in the lines with fabric pencil. The crotch was, again, the trickiest part but since I was using a 4 way stretch, it worked well enough and actually shaped quite well once we tweaked the pattern slightly. The diamond is more defined than in this picture but here is a closeup of the side panels and the piping. We added the preferred invisible zipper and added the hem to the pants and the collar and sleeve area and it was done. I'm so very happy with the fit and can't thank my friend enough for her assistance. Please excuse my dirty mirror. This is my "Swarm Wars" Mara but the pieces are the same so I plan on using them for this look as well. I had leftover leather from a prior build so made the belt/holster/harness with that. My friend 3D printed the harness buckle for me and I purchased the silver buckles needed for $2/each at a military surplus store. The buckle was $2 at Tandy Leather. My boots are my Jedi boots but should work for this. I bought drum major gloves off Amazon for $5 and plan on giving them a dip in tea dye so they can have the off white color required. I found a cheap pair of goggles on Amazon. I plan to paint over the logo and then they should be set. I already have the saber although it is not a requirement as well as a wig in the proper color. I found great Motor Cross shin guards off Amazon for $14.99. Even though they are kids sizing, all reviews say they fit adults well and have the proper circle over the knee etc. Shin Guards They should need little to no modifications. The last thing I need to make is the cowl. I have a general idea of how to make it as it looks like a wide infinity scarf so I am going to take some leftover fabric from my stash and attempt it today. I'm very close to completing and submitting for approval and I can't wait!

I would assume toy inaccuracies don't qualify as a canon source, otherwise we would have Stormtroopers running around looking like this:

Hi all! I was comissioned by Lorilei to make the KOTRII Visas Marr, which I'm really excited about doing. I've made the Unseen, Unheard version and am an approved member with that version, but I've never actually made the KOTR II Version. Browsing on here, I had a few questions about the color Red needed for the dress. When I see the word "Dark Red", I personally think like Crimson or Dried Blood kind of red, but I was noticing some of the pictures on here seem almost like just red. So I have a couple of fabrics swatches to compare. First is the 4 swatches without flash and with flash. No Flash without flash by Tabitha McCurdy, on Flickr With Flash with flash by Tabitha McCurdy, on Flickr Personally, I like swatch 3. The feel and weight of it are really nice (I almost want to switch over it completely for all my Visas Marr comissions). But I'm not sure on the color. I almost think the color of Swatch 4 is better. I make this outfit regularly, but like I said, I usually do the Unseen Unheard version, so the fabric I have in stock for the sash is kind of a dark red. The follow pics compare the samples I like to the sash fabric I have on hand. Without Flash sash without flash by Tabitha McCurdy, on Flickr With Flash sash with flash by Tabitha McCurdy, on Flickr Again, I'm kinda of leaning toward swatch 3, but I think 4 would propbably be the best. Thank you so much for your opinions!

What was wrong with the stl files? I believe I have the same ones but have not started printing yet. What layer height are you using? Are you printing in PLA? Thanks!

After looking for patterns I quit. Was too complicated for me. So grabbed an old dress I had in the closet and modified it to make the jacket. Then I lined it. The fitted pants were from Wal-Mart and did match the jacket's fabric. So I just had to add the red on the sides on the legs. I was so nervous to mess up but it came out so nice! The neck seal was made in leatherette. Did pattern with clear wrap and tape around my neck and then I transfer to fabric, making sure did the folds in the sewing machine. To tell u the truth the pain was to make the gloves. I used this tutorial and learned after many mistakes I needed to use 2 was strech fabric, no the leftover material I had in the cosplay room lol. Here is tutorial for gloves Sent from my SM-N950U using Tapatalk