Jump to content
Sign in to follow this  
Norhiak

Darth Revan Costume - WIP

Recommended Posts

As I explained in another Topic, after a long break for personal and family matters I can resume the project.

I was living for 5 years in Colombia and I met a group of very good people from the 501st Legion, it is for them that I finally decided to join this group, regrettably I had to return to Argentina and well now I'm back on the project but I will enter Garrison Argentina if everything goes well.

In this post I will be putting the general progress and the link of all the photos that have come out so far.

 

Status Report: at 11/10/2017

1 - Boots, Status 100%
     Ready for use

2 - Clothes, Status 100%
     Ready for use

3 -  Light Sabers (2 sables), Status 50%
     (In stand by until i certificate the Revan Character

4 - Gloves and Hand Plate, Status 80% 
     Ready for Paitning jobs

5 - Armour, Status 50 %
     I can´t ship it to Argentina. Start to made a new one from Zero (Agustin Aguirre help me)
     Take notes on the testing process and in the new version i going to corrects and modifies errors found in the previous version.

6 - Central Ring, Status 80 %
     Ready for Paitning jobs

7 - Bracers, Status 25 %
     Testing Jobs finished at 100%, i can´t ship it to Argentina, starting from Zero.
     Take notes on the testing process and in the new version i going to corrects and modifies errors found in the previous version.

8 - Mask, Status 25 %
     Break in the transport to Argentina. Start to made a new one from Zero (Agustin Aguirre help me)
 

Best Regards

Share this post


Link to post
Share on other sites

Helo all,

Im move the first Post to here because in the first post i wanna share the all progress of the works.
 

In this Post i´m try to send picture and ask for advise for my works.

All help or suggestion are really good accepted.

 

Before start i need say "Thanks to Agustin Aguirre, he live in Argentina and its very good working with the sable and the Lathe (spanish word: TORNO)".

 

***** All Status at 04-03-2016 ***** 

Lightsaber 1 "Red Blade"

* Constrution: 90% ( Remain drill holes for buttons)

* Decorations: Ready for paint

* Electronic: Development status 70%

 

Some Pics:

5a05a8d258fcb_RedLS01.thumb.jpg.5d5e49e47b65cf8042fff48e3c81b43f.jpg                     5a05a8cd56eec_RedLS02.thumb.jpg.2ae170d7226d7d7848ffb57ef8ffcd7a.jpg

 

 

Need some approval for continue:

 

5a05a8d01fdb9_RedLS03-Questions.thumb.jpg.6356aa482f8b1ab7161ae0cfa5a3b801.jpg

* No count the Screw for the Blade.

 

Its ok, my idea?

I can isntall to a RISE Port, but i dont know where installl it. what you say people?

 

 

Also i dont know if im install the covertec.

601.jpg

Any suggestion?

 

 

Painting:

 

I´m wan use this colors but.... the color like Brown i want use Gold,  its ok?

5a05a8caf3af5_ConceptRevanLightSaber01.jpg.4f8becdc573fd1ba763b1d82459065c4.jpg

 

 

 

Lightsaber 2 "Purple Blade"

Constrution: Waiting to Agustin aguirre send me the Saber. Ready tubes and another accesories.

Electronic: Development status 70%

 

 

Painting;

 

This is my concept idea, i dont see the finished work yet. Agustin is killing me, he dont send me nothing to see.

10-Led-Lightsabers-Star-Wars-2.jpg.7503fb2b56f4b6f92967b286ee9329db.jpg

 


Well, i hope all like my works.

Please feel free to made suggestion, im very open minded.

 

 

BEST REGARDS TO ALL !!

 

Edited by Norhiak
Image correction

Share this post


Link to post
Share on other sites

Hi again!!!

Well.... i watn share with you the fisrt item in the List... BOOTS !
Entrusted to a highly recommended company in Bogota, Colombia to be made by hand.
Company: Calzado Jarglo
Address: Calle 15 #77b - 75, Bogotá, Colombia
Telephone: +57 5 2511129


Botas_001

Botas_002

Botas_003

Botas_004

Botas_005

Share this post


Link to post
Share on other sites

Lightsaber is fine.

No need for covertec wheel, as he never wears his light saber on a belt.  The only purpose for this is if you are going to mount a Lightsaber holder to a belt, so it can hang off a belt.

Boots are fine.

Share this post


Link to post
Share on other sites
4 minutes ago, Yankee71 said:

Lightsaber is fine.

No need for covertec wheel, as he never wears his light saber on a belt.  The only purpose for this is if you are going to mount a Lightsaber holder to a belt, so it can hang off a belt.

Boots are fine.

Very good, then I modify as little as possible.
Thanks for the help.

Share this post


Link to post
Share on other sites

Hi again,

Im very happy today sharing this with you guys....
I do not want to be very annoying uploading this backward material, so I will go up 1 or 2 per day depending on the amount of time I have until I can leave all the photos uploaded as my suit goes now.

Now... its time of the O-Ring or Main Ring.
I'm going to put some pictures of the creation process of the ring echo 100% in 2 component resin.

All start drawing circles...
Anillo_Central_000

Basic Shape - Rings
Anillo_Central_001

 

Basic Shape - Inside Circles
Anillo_Central_006

 

Mold Phase 1
Anillo_Central_002

 

Mold Phase 2, shot 1
Anillo_Central_003


Mold Phase 2, shot 2
Anillo_Central_004

Filled with the Resin
Anillo_Central_005


Now it's time to make some holes, sand and polish a bit.
Anillo_Central_008

 

More sand works
Anillo_Central_009


Drill lateral holes
Anillo_Central_010
 


Anillo_Central_012

 

I dont take the final photos of the sand works...



Best Regards to all and have a good Weekend!! See you the Monday with new photos.

Share this post


Link to post
Share on other sites

Hi all,

Today i wanna share another part of the project...
Today is the time for gloves and plates.

 

Gloves buy it in Macy´s on Memphis, Mississippi
Guantes_01

Guantes_02

 

Gloves fitting
Guantes_03

Guantes_04

 

Now its time of PLATE (Test1)
HandPlate_001

 

Build process
HandPlate_002

HandPlate_003

 

Time to made some modifications
HandPlate_004

 

Time to sand work
HandPlate_005


Well, now i need use some putty and start to primer and paint.
But not for now, i need finish all the other parts.

 

See you tomorrow

Share this post


Link to post
Share on other sites

Hi all again,

I could not show the evolution of the suit.
So I sent them the pictures of the costume and the cape and added at the end a small video that I made the dressmaker Yineth Urrego that helped me with the suit, she lives in Bogota, Colombia and is not only very skilled and recommended, he is an excellent person and I can not not mention his labor.

Lets start..

Testing Clothes
Clothes__Cape_001

 

Clothes__Cape_002

 

Clothes__Cape_003

 

Clothes__Cape_004

 

Clothes__Cape_005

 

Clothes__Cape_006

 

Clothes__Cape_007

 

ook.................... Now, lets share with you huys the final works.... ta ta tadaaaaaaaaaaaaa.....

Clothes__Cape_008

 

Clothes__Cape_009

NOTE: I don´t use the balaclava, i forgot use that day. SORRY!!!

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

I dont take too many photos, sorry.... and finally the Video.

I put here the Link:
https://www.4shared.com/video/Lk0ynTr0ca/Clothes__Cape_TEST.html


I hope you enjoy this.... im very happy and very exited in finish this project.

Best Regards to all

Share this post


Link to post
Share on other sites

Hi all,

Today I want to share with you the gloves and the bracers.
Although the bracelets could not take them to Argentina I could in this test make several tests with neodymium magnets and the structure itself of the bracers.

Remember, this is considered as TEST, the final version I have to do it again.

By the way this gave me gave me many ideas for future costumes .... if yes ... I have thought minimos 2 more ...! (Insert evil laugh here)

 

Let's start by marking the tube for cuts.
Ante_Brazo_Test1_-_001


Cut, tested and corrected error (I added a little more plastic on both sides to close well by my arm)
Ante_Brazo_Test1_-_003


View of the total of the piece cut (Please ignore those marks with a marker, they are for another armor and an idea that came up for me later)
Ante_Brazo_Test1_-_002


Ante_Brazo_Test1_-_004


After joining everything, sand and put first, the final test is done.
Ante_Brazo_Test1_-_005

 

Ante_Brazo_Test1_-_006



Ante_Brazo_Test1_-_007



Ante_Brazo_Test1_-_008



Ante_Brazo_Test1_-_009

 

 

Well, I hope you liked this friends that I shared with the greatest of tastes.
As in Argentina on Monday is a holiday, I say goodbye to you until a minimum on Tuesday and have an excellent weekend.


Norhiak out!

Share this post


Link to post
Share on other sites

Hi Guys,

 

Its me again with more about this project, now i share with you all the Mask.

Mask concept in 3D found it for Pepakura
Mask_001

 

Mask Building
Mask_002


Mask_003


Mask_006


Now, its time to fix some details
Mask_008


Mask_005


Some reinforcement
Mask_010


Now its time to put some Clue to endure the Helmet Template
Mask_011


Mask_012


Mask_013b


Time to put Resin!!!
Mask_016


Time to put some Putty
Mask_014


After some Sand works (Not finished)
Mask_015


Now, i have problem with the Resin i build and after the trip to Argentina he was damaged.
Agustin Aguirre a friend of mine it´s helping me to Fix and made some convertion to this, the first model.

 

Tahanks a lot an beest regards!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×