Jump to content
  • Announcement

    Welcome to the forums!

    If you are a newly-approved member, make sure you check out the New Member Checklist!

    If you are a Detachment member and can't see the member-only area, post here for access.

    -DV

Leaderboard

Popular Content

Showing content with the highest reputation since 11/22/2016 in all areas

  1. Just a quick update on what's going on with the detachment stuff since it's been a quiet period (not always a bad thing!). 1. We're actively designing merch for a racing shirt, patch, and coin themed for KOTOR 20th based on votes. These will come in the next few months. It is slow due to lack of artists available and, well, life. 2. We're working on 3 New to the Legion CRLs/costumes currently that we're hoping to be released before the end of the term in Feb after updates to the costumes are finished. 3. We were told by LMOs that we had to wait until the end of the season of Ahsoka before submitting requests for assignment of the costumes. But, after the short, "please don't spoil the episode for us" request time, we're submitting for Shin, Baylan, Morgan, Marrok, and all 3 Great Mothers to be assigned to TFE. 4. We're still looking for artists and a new Programs Officer if you're interested/able to assist the Detachment! If you have any other requests or ideas, please feel free to comment or message me!
    5 points
  2. It's finally here! Galactic Armory's V2 mask. Much more detailed and accurate than the old version. I figure I can fit red LEDs into the eye sockets to emulate the eyes.
    4 points
  3. Just as a head's up to anyone interested in doing this costume: It has been agreed that so long as the visible parts of this costume match the references available, I am good with allowing the missing parts to be supplemented from Eleena Daaru's references. With that, I look forward to seeing a high quality submission soon!
    4 points
  4. New guy here! I've been working on a spinning GI saber for a bit and it's starting to come along. I have a youtube channel documenting the build but I also wanted a build log for better documentation and thought 'what better place then with people who can give me some sound guidance.' So here I am! Looking forward to chatting with you grand folks. I'm pretty far along in the project, so I'll be updating this log until it catches up with progress.
    4 points
  5. Try everything on Boots & gloves are from Crowprops And now I'm searching for armors
    4 points
  6. Hi folks, I just wanted to share some of the pics I took during my shooting at the Georges Henri park in Brussels
    3 points
  7. Hello from Japan. I'm working on Darth Margas. Thank you for your opinion. Sent from my iPhone using Tapatalk
    3 points
  8. Korbanth has a Savage hilt for sale: https://korbanth.com/empty-double-sided-staff-the-oppressor
    3 points
  9. So close to being done. I need to redo the arm guards and chest armor and shorten the bottom corset pieces.
    3 points
  10. Hello everyone, I’m Daisy from the Dutch Garrison and together with Rikki I have been assigned as your LMO team for this term. About Me: My name is Daisy van Rijn, and this is my second term as a 501st Legion Membership Officer. I have eight approved 501st costumes, four in the Rebel Legion and I have a Seventh Sister costume that I'm hoping to finish this year. I have been sewing since I was 19 and love sharing that acquired knowledge with others. I'm excited to be able to assist you this year with the TFE Detachment as I have a large love for the Old Republic Era. What is an LMO? The Legion Membership Team is responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officers drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with member’s costumes. Have a question about membership these are the folks to talk to! There are LMOs you can contact at any time at Legion Officers however Rikki and I are the ones who are assigned to the Imperial Gunnery Corps this term. Thinking of starting a NTTL (New to the Legion) Costume? Please message the Detachment and me here as well as send a link to your build thread. I love researching new costumes and helping. Worried a costume may or may not be eligible for the Legion approval? https://databank.501st.com/databank/Costuming:CRLGuide See Character Approval and New to the Legion Costumes (NTTL) sections for details. For “New to the Legion” costumes please also have a look here: Costuming Standards Have a question? Do not hesitate to message me. Get your references together and sent to LMO (at) 501st (dot) com.
    3 points
  11. Today was play with makeup... I didn't get around to doing the back of the head tattoos. I do plan on making a stencil for that part. This took around 2 1/2hrs. Still learning the best way to work with the materials. I think I did a pretty good job.
    3 points
  12. I found this on StarWars.com if it helps.
    3 points
  13. Galactic Armory has updated and revised their Inquisitor mask, and I'm helping them attempt to model the hard parts on the belt. Thankfully the Inquisitor wears the typical jackboots, so that'll probably be the easiest part of the build.
    3 points
  14. Separate post: The mask from Galactic Armory arrived. It looks pretty spot on, we'll see how it holds up when the show comes out. As well, GA agreed to help me research the costume after the show airs and will help me develop any armor pieces or hard parts I may need.
    3 points
  15. So have been staring like a crazy person at the pictures I have again and think that the rubber at the center front of her costume and on the gauntlets is a rubber window seal. I'm buying a few typs of S and V shapes to do some experiments with that as well. All of my printing supplies have finally come in. I hadn't planned to do it all myself, but paying to have the screens made wasn't cheap and I screwed up the scale of one of the patterns, so I decided to just bite the bullet and buy what I need. I purchased blank screens with the proper thread count for dense prints and but 2 types of emulsion to try. Both are made for high density printing. I found a supplier online that prints the film negative of the pattern for pretty cheap ($10 for my small one and $25 for the larger plus shipping). They arrived in a few days. My next step is to make my first attempt at high density screen today. I'll take pictures and share links and things later. I'm going to start with the glove pattern first since it's small volume. I've also got the pattern for the bodysuit, so I will be adapting that for what I need so I can pattern out the parts for printing. Going to be a lot more activity over the next few months! A friend of mine that loves doing leather work is helping me iwth the armor and she has one of my boots to pattern out the new shaft. I did some initial tests for aging the boot vamp and those worked pretty well. When I get the leather parts back, I'll share images and how I did things for that too.
    3 points
  16. Big Update: My mask came in and it is gorgeous! I also have the armor finally smooth and ready to paint in a satin black. The soft parts are being worked on now, pleats for the sleeves were just finished recently and were a nightmare to do, the Kylo Ren costumers were right on how bad those were to sew lol.
    3 points
  17. So excited about this! Going to buy this gorgeous lightsaber from Shadowfoil props when they are ready for order.
    3 points
  18. I was so excited that I rushed to get all the changes made lol. Here is an updated photo.
    3 points
  19. Dropping these in here in case you haven’t seen them! Moses Ingram posted some BTS on her Instagram stories today including some shots that show how the costume layers. Hope they help!
    3 points
  20. All the armor is in the painting phase now and assembling the weapons now. No pictures I wish to share yet except maybe this:
    3 points
  21. Since I have been asked several times for different characters in GoH, both older and newly released, I'll make one post to hopefully help clear it up! 1. Yes, the current TFE Command and assigned LMOs for TFE support adding GoH versions of characters as eligible for TFE approval/new CRLs, SO LONG as there is a full 360 degrees of reference to show all the details. The view option in game makes that pretty much a non-issue, but we still need the highest resolution possible. 2. If the character in question already has an approved version in TFE, then a couple things can happen: a) If there are no differences between the approved version and the GoH version, then no new CRL is made and it is considered the same as the existing approval for said character. b) If there are differences between the approved version and the GoH version, then a new CRL can be made. In this case, it is considered a New to the Legion Work in Progress (NTTL WIP) and requires an entirely different approval process that includes the TFE Command Costume Staff and the TFE LMO directly. In this case (and any not already approved character, regardless of media source), it is recommended to contact the DL and LMOs directly so that the process can be set up and advisement can be given. In this case, you can contact the LMOs at LMO@501st.com and they will redirect to the proper folks, or email me directly at Nina501st@gmail.com and I can pull in our specific LMOs.
    3 points
  22. Please move this to the forum that you think is most appropriate if this is not the right one. What is an LMO? The Legion Membership Team are responsible for reviewing and processing applications for membership, and maintaining and updating member information in the Legion database. The Legion Membership Officer drives costume policies, including acceptable costume types for membership and setting standards for costume submissions, and are the final arbiter of member costume issues and approvals. The Legion Membership Officer supervises and advises Detachments, Garrison Membership Liaisons, and Garrison Web Liaisons on any questions or issues they may have with members costumes. Have a question about membership these are the folks to talk to! LMO@501st.com *Thinking of starting a NTTL (New to the Legion) Costume? Please make sure you keep in contact with the Detachment. *For “New to the Legion” costumes please have a look here: http://databank.501st.com/databank/Costuming:CRLGuide Here is a brief list of some of the improvements we have planned for this term: • Communication, Clarity and Consistency: Utilizing the legion forum to regularly engage the membership and command staff alike through open and transparent lines of communication. (Ongoing) • Increase engagement with Detachment Leaders: Regular group meetings and conference calls to work with each other as a team. (Q1) • Launching “CRL Development Guide”: (Q1) • Streamline and document the process of creating and changing CRLs: (Q1) • Update the LMO Survival Guide: This will help current and future LMO understand the role and it’s responsibilities. (Q1) • CRL attainability: Ensuring CRLs and costumes attainable for all people in all countries and walks of life. (Ongoing) * Finishing 75% of unfinished CRLs: Supporting the detachments to find models and writing text for CRLs that are not yet green. (Q3) • Add galleries to every CRL: Increasing the use of detailed reference imagery in CRLs (Q3) • Create CRL Development Forums: Utilizing the legion forums for open and transparent development of new the legion CRLs.. (Q3) • Encouraging GML Feedback: Engaging the GMLs to ensure they know the LMO team is here to support them. Make formal efforts to receive feedback from GMLs about CRLs and the approval process. (Ongoing) • Regular Membership Surveys: We want to know what the members want. We serve the membership. (Ongoing) About Me My name is Dawn Bright and I am the LMO for the 501st Legion, ALMO with the Rebel Legion, I have previously served as XO of the Flagship Eclipse (501st) and the Senatorial Detachment (RL), GML of Southern California Garrison and a Legion Costume Judge (LCJ) for the Rebel Legion. I love making costumes (with an emphasis on EU and new to the legion), I have almost 60 (RL/501) Legion approved costumes. In my normal day to day life I am an Administrator of a care home for developmentally delayed adults in independent and inclusive living situations in sunny Southern California. I work with family's and social workers to establish communication between what the families and residents want for themselves to feel productive and able and I institute success for people in need. I'm a people person and as an LMO I put members first and foremost. People like you with passion for the costumes in this Detachment. We are all volunteers who have spent hundreds of dollars or/and hundreds of hours making costumes. I promise you that you will be treated with respect and deserve honest and efficient results. I look forward to serving you and working with this fine Detachment About the Team Michael Capell CT/SL/ID-3037 Timberline Garrison Michael has been an LMO and on the LMO Team for about a decade. He has done many things in the Legion since his wife told him she was joining and that he needed to as well. He has been the SLD Webmaster for ten years, as well as (over the years) been a GXO, GML, GWL, and GEC. He specializes in Clones, EU / Legends, Sith Lord costumes, and helping people where he can. He’s looking forward to another term helping expand our Costume Reference Library. Blair Douglas ID-12266 Midwest Garrison Blair is new to the LMO team but has served as a liaison for unity for the clubs for many years. She has LMO experience with the Rebel Legion and has led an effort in the RL around costume approval reform with a concentration on maintaining quality, improving consistency, and making approvals attainable. Her experience will help us address some of the current pain points within the 501st system. An additional bonus is that Blair is a lead software engineer by day helping to provide Fortune 500 companies technical solutions for their business needs. Her professional experience will also help us assess the current state of the systems supporting costume approvals and help to figure out how to improve them to facilitate a more positive costume approval experience. Fun fact Blair plays bass in the band Soft Speaker, extra fun fact she paid her way through college playing bass in a U2 tribute band and her nickname was Madame Clayton. Kris Kobus ID-33633 United Kingdom Garrison Kris is new to LMO but has held positions such as XO and DCA for the IOC and Events administrator for his Garrison where he is also a Officer costume adviser. Kris is a workaholic and does not believe in sleep so is usually always available no matter the time zone. Brian Anderson TK-7602 New England Garrison Brian has been the LMO team lead previously. He was one of the driving forces of Detachment empowerment and pushed for CRL changes. Brian has been on local staff and Detachment level staff for many years and brings a wealth of knowledge and experience to the table. Brian is known as the “make it look like the picture!” guy when it comes to standards and truly embraces current Legion culture. Eric Brager TK-9674 New England Garrison Eric was the lead LMO for the 501st Legion two terms from 2015 to 2017. He has twice been elected FISD Detachment Leader and has held a number of garrison level command positions in the 501st Legion We are so very excited to work with you guys! One thing I love so much about Detachments is the love for new CRLs and the passion. Both of which are very near and dear to my heart. Please do not hesitate to reach out to the Detachment or LMO team. I prefer messages Here or to LMO@501st.com that way I keep record of them and can tag appropriate parties Thank you and have a nice day, Dawn Bright SL-13377 www.SL13377.com https://www.501st.com/members/displaymember.php?userID=15902&costumeID=343
    3 points
  23. Here's the thing: these are animated characters. There isn't just one right answer because these are like art; the reference can support a handful of interpretations. The armor color is mottled, and is not just one color. I'll give an example of my favorite boots. These are black underneath, and the wax polish on top marked them look anything from grey to dark brown, but I know for a fact that the leather is black because I'm the one who put the polish on. It is the weathering that dictates how people interpret it, but these are what they looked like when I bought them: This is a real world translation of what the armor looks like in the cartoon. Now to the CRL. It is an animated cartoon, and just like 99% of the rest of our CRLs in TFE, the colors change as much as the number of times the character is seen. There is an accepted level of colors on a gradient that could be argued for the character's armor, but that does not make the CRL wrong. We only make CRLs for, "variants" that are approved, otherwise we'd have a 48 page long CRL for Aphra, alone, with all the Barbie dress up versions she has in the comics. So the correct statement isn't, "how can we make it not inaccurate?", but, "do I have the references to validate my interpretation for approval, which can then be ADDED to the existing CRL that already has done so?". The answer to that lies with the Detachment Leader, LMO, and your GML on how well you replicate the references to the real world.
    3 points
  24. Making them turned out to be very easy for me. I used foam and Worbla. It was the first thing I made with Worbla, so even if you’ve never tried it before you might find it easy enough. You can read my blog about it here if it helps- http://withoutastitchon.blogspot.com/2016/04/mara-jade-knees-and-shin-guards.html?m=1
    3 points
  25. Some of my favorites I've gotten as Darth Nihilus: Darth Maul (no real shock there) Thor (no clue how the kid came up with that one) Mulan (dad was possibly drunk, or raciest, or both...) And today I heard this story from one of my local troopers talking to a little girl dressed as a stormtrooper - "Well, I'm going to go over there and talk to Darth Vader with the skeleton face ...bye!"
    3 points
  26. Hi everyone! My name is Jason and I'm with the Star Garrison, and representing the West Texas Squad. My first approved costume was my Pre-armor Darth Vader, which was a costume I honestly wanted back when RotS came out, long before I knew about the 501st. I recently got my Darth Revan approved and I'm happy about that. I've only trooped in it once, and that was when my squad decided to take a short break after the rush surrounding The Last Jedi. Next up, I'm working on Kylo Ren, specifically both his TFA CRLs. Maybe later on in the year I can go for the new TLJ CRLs.
    3 points
  27. Hi there! DS-32946 reporting in! I'm Jessica from the 70th Explorers Garrison (Firehawk Squad). I joined the 501st in May 2016 with my ROTJ Royal Guard. My Seventh Sister is my second costume and I am working on a Biker Scout for my third. Since joining back in 2016, I've been a trooping fool ever since. To date, I have done 84 troops in my Royal Guard and just did my first troop in my Seventh Sister today!
    3 points
  28. Forwarding this to the LMO so she can see it!
    3 points
  29. There is no embargo on making a costume - if you can provide the reference pictures of the costume from all sides incl. details and such, it should be good to go. You can also message our DL @DarthValkyria and ask on how to
    2 points
  30. After researching for a long time I've come to the conclusion that there is not enough references of Darth Zannah for an official Legion costume. So I figured I'd make my own design. A bit simplified so I can make it pretty quick and on a budget, since I'm saving up for a hand tailored imperial uniform for Governor Pryce. When I got the wig I took some silly pictures, so don't mind those, they are of course not of the finished look. I still need to make the hood and wait for the actual lightsabers to arrive. I will cut the wig a bit shorter and of course do the makeup correctly next time. What do you guys think of my design idea? I really just wanted to share my progress.
    2 points
  31. My costume was approved today! Yay! DS Mara Jade set complete!
    2 points
  32. Hey everyone. So got some stuff done over the last week. Here are photos of the soft parts done. I'm going to be working on my greaves, guantlets, collar and corset belt over the next two weeks, along with playing with more makeup. I'll post pictures soon with my next makeup practice (hopefully this weekend). Cheers!
    2 points
  33. Happy to announce after after a vote, LMO said it is approvable under the RLA, so huzzah!
    2 points
  34. Took this pic yesterday. The belt boxes need to be sanded and painted, but I finished the lights yesterday. This is everything I have up to this point. No laughing as its still really early! That's the version 1 mask from Galactic Armory. The correct version is finishing printing today. Not pictured is what I guess I will call the outer cloak that I've got from a previous kit. It also would look better on a person and not laid flat.
    2 points
  35. Great find by @Trachta! Custom belt for Reva on Etsy. I’ll need to customize it a bit to make it more accurate, but it’s one less thing to build myself. :) https://www.etsy.com/listing/1265073920/third-sister-belt-reva?click_key=53f5f3b76d0ba3cedeaf7830e93173ef209efb8d%3A1265073920&click_sum=3cff8fd3&ref=shop_home_active_29&sts=1
    2 points
  36. duuuuuuuuuuuuuuuuuuuude. this is epic!!!!! great job building such an amazing costume. further to the hand make up thing. spray the barrier spray before and after makeup application and it will "sandwich" the make up in, preventing smearing and transfer to other surfaces. cant wait to see trooping photos of this costume
    2 points
  37. Not saying these would or wouldn't pass basic... But shirt should have 15 vertical ribs, not 26. Colors overall look pretty spot on to me. The fly should be a rectangular panel and not just a regular fly. Could be an easy change to just sew a rectangle of fabric over that area. Once you have boots just be sure the pants are long enough because they look disproportionally short in the pics. For the armor JMS and Tristone props on etsy are the only creators I know of for this armor. If you have a garrison mate with a printer that's the way I did it because I don't have a printer either. Magmel creations on etsy for the belt is an option.
    2 points
  38. So I was able to sit down tonight after putting the padawans to bed and get the skirt done. Plenty of YouTube videos, coffee and swearing (due to pin pokes lol) and here it is!
    2 points
  39. Yay! You're welcome for the help, and I'm excited to see this build happening and that my creation of this CRL was an inspiration! Here are some more answers to your questions: -Make sure your poncho color is lighter and less blue than the arm inserts. I had a *really* hard time correctly capturing the poncho color via photos. When in doubt, try to match the comic book color over the photos in the CRL 🙂 -Yes, there is a little bit of blue in the arm insert color. I noticed this in the comic book and added a tiny bit of denim blue to my dye bath to get it to match. -I'm attaching a photo of my poncho instructions I made for myself, so hopefully this will answer your questions on this topic. Sorry if the stitch callouts look confusing - I did them like weld callouts since I'm an Engineer and I was writing this for myself. 🤓 But if you come up with a construction that works for you, go for it! I opted for this to minimize visible seams and make it look as comic booky as possible. -For the small blaster, my husband modeled it from scratch in CAD (he's an Engineer too!), and we have 3D print files that you (or any other TFE members or prospective members reading this) are free to use if you wish! I just have to find them and will add them to this thread when I do. I would think a piece of orange tape on the end would suffice where orange tips are required, but I don't know for certain, as I never needed to do this. -For the bag, there is a frame in the comic book that I'm pretty certain is in my build thread with Mara's hand over the side of the bag. That's what I used for scaling. I made a bag out of paper and tape to check the porportions before cutting leather. As for the leather, I bought a 5 oz (I think) veg tan shoulder from Tandy a while ago that I've been using for several things, so that's what I used for the bag. You could certainly go thicker though! Let me know if you have any other questions, or free to reach out!
    2 points
  40. From the words of the costume advisors, that is correct.
    2 points
  41. Now it's really just neck seal!! (Please say saber is an option lol) The shoulder was smaller than the size I ordered but it's not bad for right now I think. Probably I'll slowly rebuild it later ;^)
    2 points
  42. I have wanted to make this version of Mara Jade for quite awhile. My only current approved Mara is the Arica disguise and can't really wear that to troops. My main issue was the bodysuit. I can sew but I don't have a serger and knew to get the proper fit, I would need one. I also was extremely confused on the diamond pattern and how to make it work properly. My last issue was budget. I can't afford to commission this so I knew that if I wanted to do this costume, I would have to make it myself, with help. I was very fortunate that my friend offered to assist me in my build and yesterday we were able to make and complete the bodysuit and it works great! We used the YaYa Han McCalls bodysuit pattern as a base. I am a very visual person so I try to sketch out what I want with my rudimentary art skills before I actually attempt any actual cutting etc. The main changes needed to the pattern are on the front. The shoulder princess seams and piping needed to be added in as well as the diamond on the front and the quilted stripes on the inside of the thighs. We ended up going with View D. The first step was cutting out the pattern. This pattern is RIDICULOUSLY oversized. With my measurements, it put me at a size 20. We cut the pattern at a 10. I used a 4 way stretch spandex I found in LA at Shavali Fabrics. Although I had purchased 4 yards, we ended up only needing around 2. The pattern calls for 1 3/8 I believe but that was inaccurate. The quilted area needed a bit more fabric and we removed the collar and the sleeves from the pattern accordingly. After the pattern was cut out, I taped it together including the 5/8 seam allowance as I went. Once this was done, the real work began. We traced out the new seam lines that would need to be added and then cut those out and retraced the entire pattern on pattern paper. Here is the revised pattern with necessary pieces put in. This is what the front of the bodysuit looked like with the modifications. We also eliminated the stirrup component and cut it straight down to end like a regular legging instead. The longest piece has the new princess seams and a reduced shoulder so it fits the CRL requirements. The crotch portion became a separate piece as did the quilted areas. The back princess seams are not a requirement and since I for one don't particularly like how those seam lines look on me personally, I omitted them and kept the back portion of the pattern as is. Here are all the pattern pieces laid out and ready to be cut. Only 2 pieces needed to be cut on the fold. That was the center panel piece and the crotch. I also ended up cutting 4 of the quilted area section and then cut an additional 2 for the batting for that. For reference, my fabric was 60 inches wide. You may need to adjust accordingly if you are working with less fabric. I ended up purchasing 2 packages of Wright's black piping and basted it to the side panels before beginning to attach everything together. The quilting was simple once I figured out how to get the minimum six panels I needed and drew in the lines with fabric pencil. The crotch was, again, the trickiest part but since I was using a 4 way stretch, it worked well enough and actually shaped quite well once we tweaked the pattern slightly. The diamond is more defined than in this picture but here is a closeup of the side panels and the piping. We added the preferred invisible zipper and added the hem to the pants and the collar and sleeve area and it was done. I'm so very happy with the fit and can't thank my friend enough for her assistance. Please excuse my dirty mirror. This is my "Swarm Wars" Mara but the pieces are the same so I plan on using them for this look as well. I had leftover leather from a prior build so made the belt/holster/harness with that. My friend 3D printed the harness buckle for me and I purchased the silver buckles needed for $2/each at a military surplus store. The buckle was $2 at Tandy Leather. My boots are my Jedi boots but should work for this. I bought drum major gloves off Amazon for $5 and plan on giving them a dip in tea dye so they can have the off white color required. I found a cheap pair of goggles on Amazon. I plan to paint over the logo and then they should be set. I already have the saber although it is not a requirement as well as a wig in the proper color. I found great Motor Cross shin guards off Amazon for $14.99. Even though they are kids sizing, all reviews say they fit adults well and have the proper circle over the knee etc. Shin Guards They should need little to no modifications. The last thing I need to make is the cowl. I have a general idea of how to make it as it looks like a wide infinity scarf so I am going to take some leftover fabric from my stash and attempt it today. I'm very close to completing and submitting for approval and I can't wait!
    2 points
  43. The CRL is not needed for first approval. It will be wrote as the first person puts in a costume to be judged. My write up is information that has been gathered from the Second Sisters Build Group on facebook (which has really great hi-res images to help you). To submit you will need to gather your references. A 360 of the character is recommended as well as close ups of details. The level of available reference material is amazing, so they'll probably be looking for something as accurate as can be translated from a 3D game character. Once you have the outfit built, take the appropriate photos for submissions. The Flagship Eclipse is the detachment and you can find further instruction on submission and contacting your unit here: https://databank.501st.com/databank/Join_Us
    2 points
  44. This is my breakdown write up from the Second Sisters Build Group on facebook. The community has put the microscope on the details and we came to these conclusions for material and accuracy. This is so very near the final version of what we have discovered. Anyone is free to use what is provided for their own use. One of the few things remaining is the description for an unmasked version which the community wanted to hold out for a couple weeks due to potential game spoilers. I have a bunch of hi-res reference images to organize and contribute as well. Those will be posted or have an available public gallery link posted within a few days. Updated: 9:05am (CST) 6 JAN 2020 Nearing final version for details - edited for clarity, and continuity to other CRL descriptions. This still has more detail than a typical CRL. Second Sister Materials Jacket • Black material that has a distinctive rib texture. rib-knit or quality Calvary twill lined in red rib-knit or quality Calvary twill material. • Red material of same rib texture for arm stripe, sewn in. Cape • Black canvas-like woven material, single stitched channels with dimensional padding • Lined in red gabardine or twill material • Yoke is a plan black fabric. Pant • Black rib-knit same as Jacket Gloves • Leather or leather-like material, black back, red palm. Boots • Black Leather or leather like material Helmet/Pauldrons/ Arm Bracers • Plastic or similar hard surface with satin finish & weathering where appropriate. . . DETAIL BREAKDOWN Helmet: • Outside and inside of the helmet is black • The back as a slightly bulbous round with a turn out aventail at the bottom • The sides of the helmet arch out at the bottom edges. • There is an under collar of the helmet design. • The cheeks have row of inset openings with mesh covered vents. • No skin is visible around or under the helmet. • Eye slit is shaped across the helmet and red in color. • Eye slit can be lit up (optional) . . Neckseal: • Smooth material with ribbed back piece, two side seams. • Back has several rows of padded where the ribs disappear under the helmet and under the collar. • No skin is visible around or under the helmet. . . Jacket: • Made of a black fabric with a ribbed texture. • Jacket is lined in red fabric with a ribbed texture. • Jacket is form fitted. • Sleeves have red strip on the outside also of ribbed material. • The jacket front is fitted with princess seams from shoulder to bottom seam - does not extend past the peplum. • The jacket folds left over right. • Jacket has a squared standing style collar with a small gap in the front. The rib is shown vertical and is stiff to stand on it's own. • Front of jacket has a sewn vent/dart at center front. • Jacket has two metallic silver rectangle bars on both left and right upper chest. Same light metallic silver tone as the belt buckle. • The top and bottom of the jacket are separated by a visible seam that is a few inches below the belt and in conjunction with the ending of the front panel. • Back of jacket has princess seam that ends an inch above the belt and aligns with insert panel. Princess seam is curved from the armhole then to straight line to the insert panel. • Back of jacket has an insert panel that starts at 1 inch above the belt and ends 1 inch below the belt (small of back). • Back of jacket has a center seam on the upper part. Insert does not have center seam. • The peplum is split in the back with a slight iverlap. • The peplum has a wide fold on each side of the split. • The peplum has side dart that stops at the lower hip and is in line with the jacket side seam. • The bottom back of the jacket is straight across and extends to mid thigh. . . Cape: • Yoke is a plain black material (not leather). • Yoke back is square from shoulder to shoulder stopping at the top of the arm. • Yoke front is angled from neck out to the Jacket’s overlap seaming. • Yoke has 3 stitches of narrow width apart at the outside edge with another 4 rows of stitches of a wide width apart. Neck edge has a single stitch. • Cape is made of black fabric with canvas-like woven texture. • Cape material has vertical single stitching from yoke to hem and the vertical lines look quilted with slight dimension. • Cape is mid-calf in length. • Cape design does not cover the front, and drapes off the shoulders sweeping to the sides. • There are white imperial “cog” symbols painted on fabric on both biceps, weathered to show weave texture. • No visible front clasp. • Lining of cape is red with a gabardine/twill texture. • Cape consists of two side panels and one back panel. . . Pauldrons: • Two armor plates extend from neck to just past the shoulder. • Black finish with no decoration or lines. • Does not have any visible straps or fastener. • Some mild weathering revealing silver underneath. . . Pants: • Made of same ribbed material as coat • No visible pockets • Has front fly closure • Pants are slim fitted • Pants have a crease down the front and the back starting from lower hip down. • Pants are tucked into boots . . Belt: • Made with leather or leather-like material approximately 1.5" • Grove on the top and bottom of the belt. • Trapezoid shaped silver belt buckle with two rectangular insets in the upper left and beveled edges. Slightly curved to the body. • Same light metallic silver tone as the silver bars on the jacket. • No other visible greeblies (except when a covertec clip is needed for wearer to hold the lightsaber hilt) . . Forearm bracers: • Constructed out of the same material as the pauldrons. • Black semi-gloss sheen • Form fitting to the wearer’s forearm. • Arm bracers start at the wrist and end just below the elbow. • Two black adornments are attached to each of the bracers at the lower forearm. The design is a rounded rectangle raised with beveled edges. It has two raised buttons and one slightly raised red lighted panel (light up optional) • They have a back seam with appropriate design insets. • They have an inner wrist adornment on each of the bracers. It is a rectangular inset with beveled edges, It has two shaped cylindrical objects positioned nearest to the wrist. It has a small side pipe extending from the cylindrical objects to the side of the inset. It has a round protrusion on the upper part of the inset. • No visible clasps or attachments. • Arm bracers are identical in detail and are a mirror of each other. . . Gloves: • Black leather or leather like material on back • Red leather or leather like material on palm. • Gloves tuck into forearm bracers. • Palm has thumb seam, double stitched • Back has thumb seam, no top stitching • Thumb and Forefinger tips have separate piece. • There are fourchettes between each finger. • Gloves have no extra stitching or detail on back. . . Boots: • Black leather or leather like material • Shaft of boot ends just below the knee • Boots have no more than 1.5” heel • Boots have no visible zippers (hidden zipper on outside of boot) • A small tab covers the zipper pull on outside of boot. • Boot has a thin red line visible on the top of the boot, and the side tab is lined in red. • Sole of boot is black • There are three rows of “V” stitching on the upper shaft of the boot. The point of the V is in the front center of the shaft. The “V” has a slightly padded look. • The lower boot has a strap across the ankle area. • No buckles or other decoration is visible. . . Light Saber: • 1st option: no blade and is attached to the hip with the half curve situated to the front. • 2nd option: half circle single blade • 3rd option: full circle double blade. • Circle part of the blade has a inset/cut out shape with writing along the inner bevel. • The blade, if used, is red in color. I don't know if the legion will require this to be exact like they do for other prime characters, but they might? .
    2 points
  45. She also appears in the Star Wars Galaxy of Heroes mobile game, and the character selection screen gives a rotatable 360* model.
    2 points
  46. I have the Saberforge Adamant, and my Visas Marr costume has been approved for both the 501st and Rebel Legions. As Yankee71 stated above, Saberforge has a bad reputation (something I did not know when I ordered my saber). I haven’t had any problems yet, but I’m preparing for the day when the electronics fail. From what I read, orders placed through Etsy ship faster than those through their website. With that said, unless you are on a budget or in a hurry, Vader’s Vault has an excellent reputation and are worth the wait. If you like tinkering with electronics, there’s also The Custom Saber Shop. They usually have components that will work for Visas Marr’s saber.
    2 points
  47. If its a Black Costume, Darth Vader is the number one mistaken name used. In my Starkiller hoth, I don't get names, I get questions "Who the hell are you?" In my Jawa, I get called a Tusken Raider. In my Malakili, again no names, just the reply that "that is probably the most comfortable costume in all of Star Wars". When outside in the hot sun, "That is the Smartest Costume"! Not trooped in my Garindan yet, but I will find out next week what comments I get in that costume.
    2 points
  48. Darth Malgus as a 1st costume, to join the 501st, is not an easy feat, as this is not an easy costume to put on or to wear the whole day at a troop. For the normal person, I would suggest an easier costume to start off with and then to try to make something at this difficulty level. Approval is dependent on your local Czech Republic GMO/GML. You have to attain the right look, compared to official reference materials. If your GML/GMO has any questions with your approval pics, they will submit them to us, and we will give our opinions. The costume in the Video would be approvable yes, but most people in the 501st don't have a "team" to help them get dressed and put on makeup and prosthetic. It is unrealistic to have to show up several hours before the troop to start putting on the costume. Pants, find an official LFL reference to support your look, and you are fine. I have seen black, and I have seen gray, so for the time being, either. Materials for the armor is up to you, but it must look correct. It has to have a thickness to it, it has to look like hard armor. Lights and everything else seen must be included. Find an official reference you are happy with, and make your costume look like the reference. This costume is not an easy one to pull off the correct look. This costume is also quite expensive to pull off the correct look. Not trying to discourage your interests, but many have started this costume and not seen it to the end, and then it was just a waste of time and money, and they never got into the 501st. Many have attempted this costume, currently only 2 have an approved Darth Malgus in the 501st!
    2 points
  49. Hi everyone! I'm prospective member of Ukraine Outpost and I'm going to do Mother Talzin costume for approve me as 501st member. So I decided to create this topic to show my work step by step. There is no clear CRL yet for this character, so I'll better to show all process and correct possible mistakes during processing, it's much easier than remaking of finished costume. Also I hope that my research will be usefull to next people who will do this character. So firstly what exactly parts does it consist of. I analyzed Talzin's stuff and see there the next items: 1) Top with long sleeves. Red with pattern sleeves decorated with reddish brown stripe, other part is plain red. 2) Leggings. Red fabric with the main pattern. 3) Neck piece. It's rather collar of the top, but as my sewing experience shows, it's much easier to do it as a separate piece. Plain red, has thick bubbled ruffles. 4) Bodice. Reddish brown as sleeves decoration and the same matherial. V-shape neckline to the collarbone. I was thinking a lot about quantity of the stripes. There are only 6 visible, but seam lines on the bust part points that there are another pair covered with skirt. 5) Shoulder pieces. The same patterned fabric as on sleeves and leggings. The length of single piece is easy to determine according to arm length. It should be from shoulder to wrist. 6) Skirt. Made of red matherial similar to the backing color of sleeves/leggings/shoulders but with large dark red pattern. Underlayed with some tight matherial to keep shape. Consist of three pieces. Side pieces are 1/2 wide of the middle back piece on the hem line. The length could be determined according to leg length. In the original it's about 2/3 of hip to floor. 7) Criss-cross scarf (tabards?). Made of the same fabric as sleeves/leggings/shoulders. The left piece cross over the right one both at front and back. 8 ) Pleated sash with belt and decorative stripes. The sash itself fitted to body shape. It's made of plain red matherial and has 4 pleats over waist line and 3 under waist line. Brown belt is made of leather-like matherial few tone lighter that bodice and sleeves decorations. Two decorative stripes on the front (floor long, the same matherial as sleeves/leggings) and two short on the back (the same color and matherial as belt) 9) Back "wings" 10) Headpiece 11) Boots 12) Makeup About the fabrics. I did pattern based on the screenshots and printed it on a fabrics (polyester for most pieces and matte spandex for leggings). I also added weathered texture which also visible on the original fabric. Skirt pattern is in progress yet, but I will print it also on polyester. For the bodice I purghased reddish brown faux leather. And here are the fabrics itself. It's both looks allmost identical, spandex just a bit softer. (I need shoot it outdoor in daylight, indoor light "eats" the colors) And the bodice pattern unassembled/assembled on a dressform. About the back shape - I did it repeating the "wings" piece. That's I have at the moment. I will add new materials as I work on the costume. PS: my English is far from ideal, but I keep practice and I'll be really appreciated if you'll notice me about possible mistakes. PPS: and thanks to @romero4444 from this thread. He collected really great references base.
    2 points
  50. Hi from the Redback garrison Australia! My name is Gabbi and I was approved last month in time to troop the biggest troop in the Southern Hemisphere At Dreamworld
    2 points
×
×
  • Create New...